| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <656d80a7-1944-43e8-476e-514506e8f12f@globallogic.com>
Date: Wed, 17 Aug 2016 10:22:45 +0300
From: "ivan.khoronzhuk" <ivan.khoronzhuk@...aro.org>
To: Mugunthan V N <mugunthanvnm@...com>,
Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
davem@...emloft.net, netdev@...r.kernel.org,
grygorii.strashko@...com
Cc: linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
nsekhar@...com
Subject: Re: [PATCH v3 5/5] net: ethernet: ti: cpsw: add ethtool channels
support
On 17.08.16 09:22, Mugunthan V N wrote:
> On Tuesday 16 August 2016 04:55 AM, Ivan Khoronzhuk wrote:
>> These ops allow to control number of channels driver is allowed to
>> work with at cpdma level. The maximum number of channels is 8 for
>> rx and 8 for tx. In dual_emac mode the h/w channels are shared
>> between two interfaces and changing number on one interface changes
>> number of channels on another.
>>
>> How many channels are supported and enabled:
>> $ ethtool -l ethX
>>
>> Change number of channels (up to 8)
>> $ ethtool -L ethX rx 6 tx 6
>>
>> Per-channel statistic:
>> $ ethtool -S ethX
>>
>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
>> ---
>> drivers/net/ethernet/ti/cpsw.c | 180 ++++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 176 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
>> index 6dcbd8a..f02e577 100644
>> --- a/drivers/net/ethernet/ti/cpsw.c
>> +++ b/drivers/net/ethernet/ti/cpsw.c
>> @@ -735,6 +735,11 @@ static void cpsw_rx_handler(void *token, int len, int status)
>> }
>>
>> requeue:
>> + if (netif_dormant(ndev)) {
>> + dev_kfree_skb_any(new_skb);
>> + return;
>> + }
>> +
>> ch = cpsw->rxch[skb_get_queue_mapping(new_skb)];
>> ret = cpdma_chan_submit(ch, new_skb, new_skb->data,
>> skb_tailroom(new_skb), 0);
>> @@ -1267,9 +1272,8 @@ static void cpsw_init_host_port(struct cpsw_priv *priv)
>> }
>> }
>>
>> -static int cpsw_fill_rx_channels(struct net_device *ndev)
>> +static int cpsw_fill_rx_channels(struct cpsw_priv *priv)
>
> This change can be moved to patch 1/5 where the function definition is
> added at first.
Yes. Will do it in v4.
>
>> {
>> - struct cpsw_priv *priv = netdev_priv(ndev);
>> struct cpsw_common *cpsw = priv->cpsw;
>> struct sk_buff *skb;
>> int ch, i, ret;
>> @@ -1279,7 +1283,7 @@ static int cpsw_fill_rx_channels(struct net_device *ndev)
>>
>> ch_buf_num = cpdma_chan_get_rx_buf_num(cpsw->rxch[ch]);
>> for (i = 0; i < ch_buf_num; i++) {
>> - skb = __netdev_alloc_skb_ip_align(ndev,
>> + skb = __netdev_alloc_skb_ip_align(priv->ndev,
>> cpsw->rx_packet_max,
>> GFP_KERNEL);
>> if (!skb) {
>> @@ -1397,7 +1401,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
>> enable_irq(cpsw->irqs_table[0]);
>> }
>>
>> - ret = cpsw_fill_rx_channels(ndev);
>> + ret = cpsw_fill_rx_channels(priv);
>> if (ret < 0)
>> goto err_cleanup;
>>
>> @@ -2060,6 +2064,172 @@ static void cpsw_ethtool_op_complete(struct net_device *ndev)
>> cpsw_err(priv, drv, "ethtool complete failed %d\n", ret);
>> }
>>
>> +static void cpsw_get_channels(struct net_device *ndev,
>> + struct ethtool_channels *ch)
>> +{
>> + struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
>> +
>> + ch->max_combined = 0;
>> + ch->max_rx = CPSW_MAX_QUEUES;
>> + ch->max_tx = CPSW_MAX_QUEUES;
>> + ch->max_other = 0;
>> + ch->other_count = 0;
>> + ch->rx_count = cpsw->rx_ch_num;
>> + ch->tx_count = cpsw->tx_ch_num;
>> + ch->combined_count = 0;
>> +}
>> +
>> +static int cpsw_check_ch_settings(struct cpsw_common *cpsw,
>> + struct ethtool_channels *ch)
>> +{
>> + if (ch->combined_count)
>> + return -EINVAL;
>> +
>> + /* verify we have at least one channel in each direction */
>> + if (!ch->rx_count || !ch->tx_count)
>> + return -EINVAL;
>> +
>> + if (ch->rx_count > cpsw->data.channels ||
>> + ch->tx_count > cpsw->data.channels)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
>> +{
>> + int (*poll)(struct napi_struct *, int);
>> + struct cpsw_common *cpsw = priv->cpsw;
>> + void (*handler)(void *, int, int);
>> + struct cpdma_chan **chan;
>> + int ret, *ch;
>> +
>> + if (rx) {
>> + ch = &cpsw->rx_ch_num;
>> + chan = cpsw->rxch;
>> + handler = cpsw_rx_handler;
>> + poll = cpsw_rx_poll;
>> + } else {
>> + ch = &cpsw->tx_ch_num;
>> + chan = cpsw->txch;
>> + handler = cpsw_tx_handler;
>> + poll = cpsw_tx_poll;
>> + }
>> +
>> + while (*ch < ch_num) {
>> + chan[*ch] = cpdma_chan_create(cpsw->dma, *ch, handler, rx);
>> +
>> + if (IS_ERR(chan[*ch]))
>> + return PTR_ERR(chan[*ch]);
>> +
>> + if (!chan[*ch])
>> + return -EINVAL;
>> +
>> + cpsw_info(priv, ifup, "created new %d %s channel\n", *ch,
>> + (rx ? "rx" : "tx"));
>> + (*ch)++;
>> + }
>> +
>> + while (*ch > ch_num) {
>> + (*ch)--;
>> +
>> + ret = cpdma_chan_destroy(chan[*ch]);
>> + if (ret)
>> + return ret;
>> +
>> + cpsw_info(priv, ifup, "destroyed %d %s channel\n", *ch,
>> + (rx ? "rx" : "tx"));
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int cpsw_update_channels(struct cpsw_priv *priv,
>> + struct ethtool_channels *ch)
>> +{
>> + int ret;
>> +
>> + ret = cpsw_update_channels_res(priv, ch->rx_count, 1);
>> + if (ret)
>> + return ret;
>> +
>> + ret = cpsw_update_channels_res(priv, ch->tx_count, 0);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int cpsw_set_channels(struct net_device *ndev,
>> + struct ethtool_channels *chs)
>> +{
>> + struct cpsw_priv *priv = netdev_priv(ndev);
>> + struct cpsw_common *cpsw = priv->cpsw;
>> + struct cpsw_slave *slave;
>> + int i, ret;
>> +
>> + ret = cpsw_check_ch_settings(cpsw, chs);
>> + if (ret < 0)
>> + return ret;
>> +
>> + cpsw_intr_disable(cpsw);
>> +
>> + for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++) {
>> + if (!(slave->ndev && netif_running(slave->ndev)))
>> + continue;
>> +
>> + netif_tx_stop_all_queues(slave->ndev);
>> + netif_dormant_on(slave->ndev);
>> + }
>> +
>> + cpdma_ctlr_stop(cpsw->dma);
>> + ret = cpsw_update_channels(priv, chs);
>> + if (ret)
>> + goto err;
>> +
>> + for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++) {
>> + if (!(slave->ndev && netif_running(slave->ndev)))
>> + continue;
>> +
>> + /* inform stack about new count of queues */
>> + ret = netif_set_real_num_tx_queues(slave->ndev,
>> + cpsw->tx_ch_num);
>> + if (ret) {
>> + dev_err(priv->dev, "cannot set real number of tx queues\n");
>> + goto err;
>> + }
>> +
>> + ret = netif_set_real_num_rx_queues(slave->ndev,
>> + cpsw->rx_ch_num);
>> + if (ret) {
>> + dev_err(priv->dev, "cannot set real number of rx queues\n");
>> + goto err;
>> + }
>> +
>> + netif_dormant_off(slave->ndev);
>> + }
>> +
>> + if (cpsw_common_res_usage_state(cpsw)) {
>> + if (cpsw_fill_rx_channels(priv))
>> + goto err;
>> +
>> + cpdma_ctlr_start(cpsw->dma);
>> + cpsw_intr_enable(cpsw);
>> + }
>> +
>> + for (i = cpsw->data.slaves, slave = cpsw->slaves; i; i--, slave++) {
>> + if (!(slave->ndev && netif_running(slave->ndev)))
>> + continue;
>> + netif_tx_start_all_queues(slave->ndev);
>> + }
>> +
>> + return 0;
>> +err:
>> + dev_err(priv->dev, "cannot update channels number, closing device\n");
>> + dev_close(ndev);
>> + return ret;
>> +}
>> +
>> static const struct ethtool_ops cpsw_ethtool_ops = {
>> .get_drvinfo = cpsw_get_drvinfo,
>> .get_msglevel = cpsw_get_msglevel,
>> @@ -2081,6 +2251,8 @@ static const struct ethtool_ops cpsw_ethtool_ops = {
>> .get_regs = cpsw_get_regs,
>> .begin = cpsw_ethtool_op_begin,
>> .complete = cpsw_ethtool_op_complete,
>> + .get_channels = cpsw_get_channels,
>> + .set_channels = cpsw_set_channels,
>> };
>>
>> static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_common *cpsw,
>>
>
Powered by blists - more mailing lists