[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1064826087.3700254.1472652458320.JavaMail.zimbra@redhat.com>
Date: Wed, 31 Aug 2016 10:07:38 -0400 (EDT)
From: Laurence Oberman <loberman@...hat.com>
To: Finn Thain <fthain@...egraphics.com.au>
Cc: "James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linux-scsi@...r.kernel.org, linux-m68k@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michael Schmitz <schmitzmic@...il.com>
Subject: Re: [PATCH v2 3/3] scsi/ncr5380: Improve interrupt latency during
PIO tranfers
----- Original Message -----
> From: "Finn Thain" <fthain@...egraphics.com.au>
> To: "James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>, "Martin K. Petersen" <martin.petersen@...cle.com>, "Geert
> Uytterhoeven" <geert@...ux-m68k.org>, linux-scsi@...r.kernel.org, linux-m68k@...r.kernel.org,
> linux-kernel@...r.kernel.org, "Michael Schmitz" <schmitzmic@...il.com>
> Sent: Wednesday, August 31, 2016 12:44:56 AM
> Subject: [PATCH v2 3/3] scsi/ncr5380: Improve interrupt latency during PIO tranfers
>
> Large PIO transfers are broken up into chunks to try to avoid disabling
> local IRQs for long periods. But IRQs are still disabled for too long
> and this causes SCC FIFO overruns during serial port transfers.
>
> This patch reduces the PIO chunk size to reduce interrupt latency to
> something on the order of milliseconds, at the expense of additional CPU
> overhead from extra iterations of the NCR5380_main() loop.
>
> That CPU overhead is a problem for slow machines (e.g. mac_scsi on 25 MHz
> 68030) but these machines generally use PDMA not PIO. This patch doesn't
> make the overhead any worse on my Mac LC III (because it only gets about
> 510 accesses per ms).
>
> This patch decreases disk performance by a fraction of one percent for
> dmx3191d on my 333 MHz PowerPC 750. Other affected hardware (such as
> g_NCR5380 on x86) was not tested but 5380 ISA cards generally use PDMA
> and not PIO.
>
> Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
>
> ---
> Changed since v1:
> - PIO transfer chunk size is now hard-coded for simplicity.
>
> ---
> drivers/scsi/NCR5380.c | 8 ++++----
> drivers/scsi/NCR5380.h | 2 ++
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> Index: linux/drivers/scsi/NCR5380.c
> ===================================================================
> --- linux.orig/drivers/scsi/NCR5380.c 2016-08-31 14:44:51.000000000 +1000
> +++ linux/drivers/scsi/NCR5380.c 2016-08-31 14:44:52.000000000 +1000
> @@ -1849,11 +1849,11 @@ static void NCR5380_information_transfer
> /* XXX - need to source or sink data here, as appropriate */
> }
> } else {
> - /* Break up transfer into 3 ms chunks,
> - * presuming 6 accesses per handshake.
> + /* Transfer a small chunk so that the
> + * irq mode lock is not held too long.
> */
> - transfersize = min((unsigned long)cmd->SCp.this_residual,
> - hostdata->accesses_per_ms / 2);
> + transfersize = min(cmd->SCp.this_residual,
> + NCR5380_PIO_CHUNK_SIZE);
> len = transfersize;
> NCR5380_transfer_pio(instance, &phase, &len,
> (unsigned char **)&cmd->SCp.ptr);
> Index: linux/drivers/scsi/NCR5380.h
> ===================================================================
> --- linux.orig/drivers/scsi/NCR5380.h 2016-08-31 14:44:51.000000000 +1000
> +++ linux/drivers/scsi/NCR5380.h 2016-08-31 14:44:52.000000000 +1000
> @@ -250,6 +250,8 @@ struct NCR5380_cmd {
>
> #define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
>
> +#define NCR5380_PIO_CHUNK_SIZE 256
> +
> static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd
> *ncmd_ptr)
> {
> return ((struct scsi_cmnd *)ncmd_ptr) - 1;
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Patch makes sense, look good to me.
Reviwed-by: Laurence Oberman <loberman@...hat.com>
Powered by blists - more mailing lists