lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <98605ab9-6ece-605f-ca2a-56b8c826c4ad@atmel.com>
Date:   Tue, 20 Sep 2016 11:52:13 +0200
From:   Cyrille Pitchen <cyrille.pitchen@...el.com>
To:     Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>,
        David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        "Javier Martinez Canillas" <javier@....samsung.com>,
        Boris Brezillon <boris.brezillon@...e-electrons.com>,
        Stephen Warren <swarren@...dia.com>,
        Jagan Teki <jteki@...nedev.com>, Vignesh R <vigneshr@...com>,
        Marek Vasut <marex@...x.de>,
        Ezequiel García <ezequiel@...guardiasur.com.ar>,
        Rafał Miłecki <zajec5@...il.com>,
        Furquan Shaikh <furquan@...gle.com>,
        "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5] mtd: spi-nor: Add support for S3AN spi-nor devices

Hi Ricardo,

Le 16/09/2016 à 21:33, Ricardo Ribalda Delgado a écrit :
> Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep
> their configuration data and (optionally) some user data.
> 
> The protocol of this flash follows most of the spi-nor standard. With
> the following differences:
> 
> - Page size might not be a power of two.
> - The address calculation (default addressing mode).
> - The spi nor commands used.
> 
> Protocol is described on Xilinx User Guide UG333
> 
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
Reviewed-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
> ---
> v5:
> -Rebase on top of l2-mtd/master
> Suggested by: Cyrille Pitchen <cyrille.pitchen@...el.com>:
> -Fix to+1 bug
> -Move all address conversions to spi-nor
> -Replace pr_dev with dev_err
> 
> v4:
> -Rebase on top of l2-mtd/master
> 
> v3:
> -Rebase on top of mtd-next
> -Rename ADDR_NATIVE to ADDR_DEFAULT to follow UG333 naming
> -Fix bug on probe
> 
> v2: Suggested by Brian Norris <computersforpeace@...il.com>
> 
> -Remove inline qualifier
> -Improve documentation of Default Addressing Mode
> -Convert function callbacks into SNOR_F_
> -Fix missmatch braces
> -Improve documentation of SPI_S3AN flag
>  drivers/mtd/spi-nor/spi-nor.c | 122 ++++++++++++++++++++++++++++++++++++++++--
>  include/linux/mtd/spi-nor.h   |  12 +++++
>  2 files changed, 129 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d0fc165d7d66..94c5fd870058 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -75,6 +75,12 @@ struct flash_info {
>  					 * bit. Must be used with
>  					 * SPI_NOR_HAS_LOCK.
>  					 */
> +#define	SPI_S3AN		BIT(10)	/*
> +					 * Xilinx Spartan 3AN In-System Flash
> +					 * (MFR cannot be used for probing
> +					 * because it has the same value as
> +					 * ATMEL flashes)
> +					*/
>  };
>  
>  #define JEDEC_MFR(info)	((info)->id[0])
> @@ -217,6 +223,21 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
>  		return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
>  	}
>  }
> +
> +static int s3an_sr_ready(struct spi_nor *nor)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
> +	if (ret < 0) {
> +		dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
> +		return ret;
> +	}
> +
> +	return !!(val & XSR_RDY);
> +}
> +
>  static inline int spi_nor_sr_ready(struct spi_nor *nor)
>  {
>  	int sr = read_sr(nor);
> @@ -238,7 +259,9 @@ static inline int spi_nor_fsr_ready(struct spi_nor *nor)
>  static int spi_nor_ready(struct spi_nor *nor)
>  {
>  	int sr, fsr;
> -	sr = spi_nor_sr_ready(nor);
> +
> +	sr = nor->flags & SNOR_F_READY_XSR_RDY ? s3an_sr_ready(nor) :
> +						 spi_nor_sr_ready(nor);
>  	if (sr < 0)
>  		return sr;
>  	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
> @@ -320,6 +343,22 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
>  }
>  
>  /*
> + * This code converts an address to the Default Address Mode, that has non
> + * power of two page sizes. We must support this mode because it is the default
> + * mode supported by Xilinx tools, it can access the whole flash area and
> + * changing over to the Power-of-two mode is irreversible and corrupts the
> + * original data.
> + */
> +static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
> +{
> +	unsigned int offset;
> +
> +	offset = (nor->page_size == 264) ? (addr % 264) : (addr % 528);
> +
> +	return ((addr - offset) << 1) | offset;
> +}
> +
> +/*
>   * Initiate the erasure of a single sector
>   */
>  static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
> @@ -327,6 +366,9 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
>  	u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
>  	int i;
>  
> +	if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
> +		addr = spi_nor_s3an_addr_convert(nor, addr);
> +
>  	if (nor->erase)
>  		return nor->erase(nor, addr);
>  
> @@ -368,7 +410,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
>  		return ret;
>  
>  	/* whole-chip erase? */
> -	if (len == mtd->size) {
> +	if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
>  		unsigned long timeout;
>  
>  		write_enable(nor);
> @@ -782,6 +824,19 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  		.addr_width = (_addr_width),				\
>  		.flags = (_flags),
>  
> +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
> +		.id = {							\
> +			((_jedec_id) >> 16) & 0xff,			\
> +			((_jedec_id) >> 8) & 0xff,			\
> +			(_jedec_id) & 0xff				\
> +			},						\
> +		.id_len = 3,						\
> +		.sector_size = (8*_page_size),				\
> +		.n_sectors = (_n_sectors),				\
> +		.page_size = _page_size,				\
> +		.addr_width = 3,					\
> +		.flags = SPI_NOR_NO_FR | SPI_S3AN,
> +
>  /* NOTE: double check command sets and memory organization when you add
>   * more nor chips.  This current list focusses on newer chips, which
>   * have been converging on command sets which including JEDEC ID.
> @@ -1009,6 +1064,13 @@ static const struct flash_info spi_nor_ids[] = {
>  	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>  	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>  	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +
> +	/* Xilinx S3AN Internal Flash */
> +	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
> +	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
> +	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
> +	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
> +	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
>  	{ },
>  };
>  
> @@ -1049,7 +1111,12 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
>  		return ret;
>  
>  	while (len) {
> -		ret = nor->read(nor, from, len, buf);
> +		loff_t addr = from;
> +
> +		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
> +			addr = spi_nor_s3an_addr_convert(nor, addr);
> +
> +		ret = nor->read(nor, addr, len, buf);
>  		if (ret == 0) {
>  			/* We shouldn't see 0-length reads */
>  			ret = -EIO;
> @@ -1170,8 +1237,15 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
>  
>  	for (i = 0; i < len; ) {
>  		ssize_t written;
> +		loff_t addr = to + i;
>  
> -		page_offset = (to + i) & (nor->page_size - 1);
> +		if (hweight32(nor->page_size) == 1) {
> +			page_offset = addr & (nor->page_size - 1);
> +		} else {
> +			uint64_t aux = addr;
> +
> +			page_offset = do_div(aux, nor->page_size);
> +		}
>  		WARN_ONCE(page_offset,
>  			  "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
>  			  page_offset);
> @@ -1179,8 +1253,11 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
>  		page_remain = min_t(size_t,
>  				    nor->page_size - page_offset, len - i);
>  
> +		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
> +			addr = spi_nor_s3an_addr_convert(nor, addr);
> +
>  		write_enable(nor);
> -		ret = nor->write(nor, to + i, page_remain, buf + i);
> +		ret = nor->write(nor, addr, page_remain, buf + i);
>  		if (ret < 0)
>  			goto write_err;
>  		written = ret;
> @@ -1300,6 +1377,35 @@ static int spi_nor_check(struct spi_nor *nor)
>  	return 0;
>  }
>  
> +static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
> +	if (ret < 0) {
> +		dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
> +		return ret;
> +	}
> +
> +	nor->erase_opcode = SPINOR_OP_XSE;
> +	nor->program_opcode = SPINOR_OP_XPP;
> +	nor->read_opcode = SPINOR_OP_READ;
> +	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE | SNOR_F_READY_XSR_RDY;
> +
> +	/* Flash in Power of 2 mode */
> +	if (val & XSR_PAGESIZE) {
> +		nor->page_size = (nor->page_size == 264) ? 256 : 512;
> +		nor->mtd.writebufsize = nor->page_size;
> +		nor->mtd.size = 8 * nor->page_size * info->n_sectors;
> +		nor->mtd.erasesize = 8 * nor->page_size;
> +	} else {
> +		nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
> +	}
> +
> +	return 0;
> +}
> +
>  int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>  {
>  	const struct flash_info *info = NULL;
> @@ -1505,6 +1611,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>  
>  	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
>  
> +	if (info->flags & SPI_S3AN) {
> +		ret = s3an_nor_scan(info, nor);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
>  			(long long)mtd->size >> 10);
>  
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index c425c7b4c2a0..4950b2ef08c0 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -68,6 +68,15 @@
>  #define SPINOR_OP_WRDI		0x04	/* Write disable */
>  #define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
>  
> +/* Used for S3AN flashes only */
> +#define SPINOR_OP_XSE		0x50	/* Sector erase */
> +#define SPINOR_OP_XPP		0x82	/* Page program */
> +#define SPINOR_OP_XRDSR		0xd7	/* Read status register */
> +
> +#define XSR_PAGESIZE		BIT(0)	/* Page size in Po2 or Linear */
> +#define XSR_RDY			BIT(7)	/* Ready */
> +
> +
>  /* Used for Macronix and Winbond flashes. */
>  #define SPINOR_OP_EN4B		0xb7	/* Enter 4-byte mode */
>  #define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
> @@ -119,6 +128,9 @@ enum spi_nor_ops {
>  enum spi_nor_option_flags {
>  	SNOR_F_USE_FSR		= BIT(0),
>  	SNOR_F_HAS_SR_TB	= BIT(1),
> +	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
> +	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
> +	SNOR_F_READY_XSR_RDY	= BIT(4),
>  };
>  
>  /**
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ