| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1474404339-9524-1-git-send-email-zach.brown@ni.com>
Date: Tue, 20 Sep 2016 15:45:39 -0500
From: Zach Brown <zach.brown@...com>
To: dwmw2@...radead.org
Cc: computersforpeace@...il.com, dedekind1@...il.com, richard@....at,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] UBI: add debugfs file for tracking PEB state
From: Ben Shelton <ben.shelton@...com>
Add a file under debugfs to allow easy access to the erase count for
each physical erase block on an UBI device. This is useful when
debugging data integrity issues with UBIFS on NAND flash devices.
Signed-off-by: Ben Shelton <ben.shelton@...com>
Signed-off-by: Zach Brown <zach.brown@...com>
---
v2
* Cast pointer in unsigned long instead of int to avoid build warning
* Use ubi->lookuptbl[] to get erase counter instead of reading from flash
drivers/mtd/ubi/debug.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 144 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index f101a49..57d255c 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
+#include <linux/seq_file.h>
/**
@@ -386,7 +387,9 @@ out:
return count;
}
-/* File operations for all UBI debugfs files */
+/* File operations for all UBI debugfs files except
+ * detailed_erase_block_info
+ */
static const struct file_operations dfs_fops = {
.read = dfs_file_read,
.write = dfs_file_write,
@@ -395,6 +398,140 @@ static const struct file_operations dfs_fops = {
.owner = THIS_MODULE,
};
+/* As long as the position is less then that total number of erase blocks,
+ * we still have more to print.
+ */
+static void *eraseblk_count_seq_start(struct seq_file *s, loff_t *pos)
+{
+ struct ubi_device *ubi = s->private;
+
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
+ if (*pos < ubi->peb_count)
+ return pos;
+
+ return NULL;
+}
+
+/* Since we are using the position as the iterator, we just need to check if we
+ * are done and increment the position.
+ */
+static void *eraseblk_count_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ struct ubi_device *ubi = s->private;
+
+ if (v == SEQ_START_TOKEN)
+ return pos;
+ (*pos)++;
+
+ if (*pos < ubi->peb_count)
+ return pos;
+
+ return NULL;
+}
+
+static void eraseblk_count_seq_stop(struct seq_file *s, void *v)
+{
+}
+
+enum block_status {
+ BLOCK_STATUS_OK,
+ BLOCK_STATUS_BAD_BLOCK,
+ BLOCK_STATUS_ERASE_COUNT_BEYOND_MAX
+};
+
+static char const *block_status_names[] = {"OK", "marked_bad",
+ "erase_count_beyond_max"};
+
+enum read_status {
+ READ_STATUS_OK,
+ READ_STATUS_ERR_READING_BLOCK,
+ READ_STATUS_ERR_READING_ERASE_COUNT
+};
+
+static char const *read_status_names[] = {"OK", "err_reading_block",
+ "err_reading_erase_count"};
+
+static int eraseblk_count_seq_show(struct seq_file *s, void *iter)
+{
+ struct ubi_device *ubi = s->private;
+ struct ubi_wl_entry *wl;
+ int *block_number = iter;
+ int erase_count = -1;
+ enum block_status b_sts = BLOCK_STATUS_OK;
+ enum read_status r_sts = READ_STATUS_OK;
+ int err;
+
+ /* If this is the start, print a header */
+ if (iter == SEQ_START_TOKEN) {
+ seq_puts(s,
+ "physical_block_number\terase_count\tblock_status\tread_status\n");
+ return 0;
+ }
+
+ err = ubi_io_is_bad(ubi, *block_number);
+ if (err) {
+ if (err < 0)
+ r_sts = READ_STATUS_ERR_READING_BLOCK;
+ else
+ b_sts = BLOCK_STATUS_BAD_BLOCK;
+ } else {
+ wl = ubi->lookuptbl[*block_number];
+ erase_count = wl->ec;
+ if (erase_count > UBI_MAX_ERASECOUNTER)
+ b_sts = BLOCK_STATUS_ERASE_COUNT_BEYOND_MAX;
+ }
+
+ seq_printf(s, "%-22d\t%-11d\t%-12s\t%-12s\n", *block_number,
+ erase_count, block_status_names[b_sts],
+ read_status_names[r_sts]);
+ return 0;
+}
+
+static const struct seq_operations eraseblk_count_seq_ops = {
+ .start = eraseblk_count_seq_start,
+ .next = eraseblk_count_seq_next,
+ .stop = eraseblk_count_seq_stop,
+ .show = eraseblk_count_seq_show
+};
+
+static int eraseblk_count_open(struct inode *inode, struct file *f)
+{
+ struct seq_file *s;
+ int err;
+
+ err = seq_open(f, &eraseblk_count_seq_ops);
+ if (err)
+ return err;
+
+ s = f->private_data;
+ s->private = ubi_get_device((unsigned long)inode->i_private);
+
+ if (!s->private)
+ return -ENODEV;
+ else
+ return 0;
+}
+
+static int eraseblk_count_release(struct inode *inode, struct file *f)
+{
+ struct seq_file *s = f->private_data;
+ struct ubi_device *ubi = s->private;
+
+ ubi_put_device(ubi);
+
+ return seq_release(inode, f);
+}
+
+static const struct file_operations eraseblk_count_fops = {
+ .owner = THIS_MODULE,
+ .open = eraseblk_count_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = eraseblk_count_release,
+};
+
/**
* ubi_debugfs_init_dev - initialize debugfs for an UBI device.
* @ubi: UBI device description object
@@ -491,6 +628,12 @@ int ubi_debugfs_init_dev(struct ubi_device *ubi)
goto out_remove;
d->dfs_power_cut_max = dent;
+ fname = "detailed_erase_block_info";
+ dent = debugfs_create_file(fname, S_IRUSR, d->dfs_dir, (void *)ubi_num,
+ &eraseblk_count_fops);
+ if (IS_ERR_OR_NULL(dent))
+ goto out_remove;
+
return 0;
out_remove:
--
2.7.4
Powered by blists - more mailing lists