[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7b4066c1-d850-3440-e221-53bd131e9480@gmail.com>
Date: Wed, 21 Sep 2016 12:39:16 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Eric Anholt <eric@...olt.net>,
Florian Fainelli <f.fainelli@...il.com>
Cc: linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Stephen Warren <swarren@...dotorg.org>,
Lee Jones <lee@...nel.org>,
bcm-kernel-feedback-list@...adcom.com,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the
defconfig
On 09/19/2016 06:31 AM, Eric Anholt wrote:
> Most of the drivers are included as modules, except for serial (needed
> for early console), WDT (required for reboot), and the dependency
> chain of RASPBERRYPI_POWER (which is currently not buildable as a
> module, but should be changed).
>
> Signed-off-by: Eric Anholt <eric@...olt.net>
LGTM, can you queue this for the next ARM/ARM64 SoC pull request in a
separate branch for me to pull from?
Thanks!
> ---
> arch/arm64/configs/defconfig | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index fb8d84516e92..9748c4735a60 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
> # CONFIG_IOSCHED_DEADLINE is not set
> CONFIG_ARCH_SUNXI=y
> CONFIG_ARCH_ALPINE=y
> +CONFIG_ARCH_BCM2835=y
> CONFIG_ARCH_BCM_IPROC=y
> CONFIG_ARCH_BERLIN=y
> CONFIG_ARCH_EXYNOS=y
> @@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
> CONFIG_USB_NET_SMSC95XX=m
> CONFIG_USB_NET_PLUSB=m
> CONFIG_USB_NET_MCS7830=m
> +CONFIG_BRCMFMAC=m
> CONFIG_WL18XX=m
> CONFIG_WLCORE_SDIO=m
> CONFIG_INPUT_EVDEV=y
> @@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
> CONFIG_LEGACY_PTY_COUNT=16
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_8250_BCM2835AUX=y
> CONFIG_SERIAL_8250_DW=y
> CONFIG_SERIAL_8250_MT6577=y
> CONFIG_SERIAL_8250_UNIPHIER=y
> @@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_I2C_BCM2835=m
> CONFIG_I2C_DESIGNWARE_PLATFORM=y
> CONFIG_I2C_IMX=y
> CONFIG_I2C_MESON=y
> @@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> +CONFIG_SPI_BCM2835=m
> +CONFIG_SPI_BCM2835AUX=m
> CONFIG_SPI_MESON_SPIFC=m
> CONFIG_SPI_ORION=y
> CONFIG_SPI_PL022=y
> @@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
> CONFIG_CPU_THERMAL=y
> CONFIG_EXYNOS_THERMAL=y
> CONFIG_WATCHDOG=y
> +CONFIG_BCM2835_WDT=y
> CONFIG_RENESAS_WDT=y
> CONFIG_S3C2410_WATCHDOG=y
> CONFIG_MESON_GXBB_WATCHDOG=m
> @@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
> CONFIG_DRM=m
> CONFIG_DRM_NOUVEAU=m
> CONFIG_DRM_TEGRA=m
> +CONFIG_DRM_VC4=m
> CONFIG_DRM_PANEL_SIMPLE=m
> CONFIG_DRM_I2C_ADV7511=m
> CONFIG_DRM_HISI_KIRIN=m
> @@ -308,6 +318,7 @@ CONFIG_LOGO=y
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_SOC=y
> +CONFIG_SND_BCM2835_SOC_I2S=m
> CONFIG_SND_SOC_RCAR=y
> CONFIG_SND_SOC_SAMSUNG=y
> CONFIG_SND_SOC_AK4613=y
> @@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
> CONFIG_RTC_DRV_S3C=y
> CONFIG_DMADEVICES=y
> CONFIG_PL330_DMA=y
> +CONFIG_DMA_BCM2835=m
> CONFIG_TEGRA20_APB_DMA=y
> CONFIG_QCOM_BAM_DMA=y
> CONFIG_QCOM_HIDMA_MGMT=y
> @@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
> CONFIG_HWSPINLOCK_QCOM=y
> CONFIG_MAILBOX=y
> CONFIG_ARM_MHU=y
> +CONFIG_BCM2835_MBOX=y
> CONFIG_HI6220_MBOX=y
> CONFIG_ARM_SMMU=y
> +CONFIG_RASPBERRYPI_POWER=y
> CONFIG_QCOM_SMEM=y
> CONFIG_QCOM_SMD=y
> CONFIG_QCOM_SMD_RPM=y
> @@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
> CONFIG_ARCH_TEGRA_210_SOC=y
> CONFIG_EXTCON_USB_GPIO=y
> CONFIG_PWM=y
> +CONFIG_PWM_BCM2835=m
> CONFIG_PWM_TEGRA=m
> CONFIG_COMMON_RESET_HI6220=y
> CONFIG_PHY_RCAR_GEN3_USB2=y
> @@ -414,6 +429,7 @@ CONFIG_ACPI=y
> CONFIG_IIO=y
> CONFIG_EXYNOS_ADC=y
> CONFIG_PWM_SAMSUNG=y
> +CONFIG_RASPBERRYPI_FIRMWARE=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
>
--
Florian
Powered by blists - more mailing lists