[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD6G_RQRPRbo-+nUK+xiOjiZDG1W4v2JTawxQ2LDzx9LfMmSBw@mail.gmail.com>
Date: Thu, 22 Sep 2016 19:59:13 +0530
From: Jagan Teki <jagannadh.teki@...il.com>
To: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
Brian Norris <computersforpeace@...il.com>
Cc: David Woodhouse <dwmw2@...radead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Jagan Teki <jteki@...nedev.com>
Subject: Re: [PATCH 1/6] mtd: spi-nor: Add quad page program support
On Mon, Aug 29, 2016 at 6:54 PM, Jagan Teki <jagannadh.teki@...il.com> wrote:
> On Wed, Aug 10, 2016 at 2:10 AM, Jagan Teki <jteki@...nedev.com> wrote:
>> Add quad page program support with the use of nor->flags
>> and then controller will use 4 lines for data transmission
>> which is quite faster than page program(02h)
>>
>> Cc: Brian Norris <computersforpeace@...il.com>
>> Signed-off-by: Jagan Teki <jteki@...nedev.com>
>> ---
>> drivers/mtd/spi-nor/spi-nor.c | 13 +++++++++++++
>> include/linux/mtd/spi-nor.h | 2 ++
>> 2 files changed, 15 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index d0fc165..f88bd7e 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -75,6 +75,7 @@ struct flash_info {
>> * bit. Must be used with
>> * SPI_NOR_HAS_LOCK.
>> */
>> +#define SPI_NOR_QUAD_WRITE BIT(10) /* Flash supports Quad Write */
>> };
>>
>> #define JEDEC_MFR(info) ((info)->id[0])
>> @@ -1306,6 +1307,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>> struct device *dev = nor->dev;
>> struct mtd_info *mtd = &nor->mtd;
>> struct device_node *np = spi_nor_get_flash_node(nor);
>> + bool need_quad = false;
>> int ret;
>> int i;
>>
>> @@ -1441,6 +1443,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>> return ret;
>> }
>> nor->flash_read = SPI_NOR_QUAD;
>> + need_quad = true;
>> } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
>> nor->flash_read = SPI_NOR_DUAL;
>> }
>> @@ -1465,6 +1468,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>> }
>>
>> nor->program_opcode = SPINOR_OP_PP;
>> + if (nor->flags == SNOR_F_USE_QPP && info->flags & SPI_NOR_QUAD_WRITE) {
>> + if (!need_quad)
>> + ret = set_quad_mode(nor, info);
>> + if (ret) {
>> + dev_err(dev, "quad mode not supported\n");
>> + return ret;
>> + }
>> + }
>> + nor->program_opcode = SPINOR_OP_QPP;
>> + }
>>
>> if (info->addr_width)
>> nor->addr_width = info->addr_width;
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index c425c7b..aa0e6cd 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -46,6 +46,7 @@
>> #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */
>> #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */
>> #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
>> +#define SPINOR_OP_QPP 0x32 /* Quad Page program */
>> #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
>> #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
>> #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
>> @@ -119,6 +120,7 @@ enum spi_nor_ops {
>> enum spi_nor_option_flags {
>> SNOR_F_USE_FSR = BIT(0),
>> SNOR_F_HAS_SR_TB = BIT(1),
>> + SNOR_F_USE_QPP = BIT(2),
>> };
>>
>> /**
>> --
>> 2.7.4
>>
>
> Ping!
Any comments? will resend rebased v2 if it is OK?
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
Powered by blists - more mailing lists