linux-kernel - Re: [PATCH net v2] L2TP:Adjust intf MTU,factor underlay L3,overlay L2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160929142155.49f9cf0a@griffin>
Date:   Thu, 29 Sep 2016 14:21:55 +0200
From:   Jiri Benc <jbenc@...hat.com>
To:     "R. Parameswaran" <parameswaran.r7@...il.com>
Cc:     David Miller <davem@...emloft.net>, kleptog@...na.org,
        jchapman@...alix.com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, nprachan@...cade.com,
        rshearma@...cade.com, dfawcus@...cade.com,
        stephen@...workplumber.org, acme@...hat.com, lboccass@...cade.com
Subject: Re: [PATCH net v2] L2TP:Adjust intf MTU,factor underlay L3,overlay
 L2

On Wed, 28 Sep 2016 19:36:45 -0700 (PDT), R. Parameswaran wrote:
> I'd like to point out one difference with VXLAN - in VXLAN, the 
> local physical interface is directly specified at the time of 
> creation of the tunnel, and the data structure seems to have the ifindex 
> of the local interface with which it is able to directly pull up the 
> underlay interface device. Whereas in L2TP, we only have the IP
> address of the remote tunnel end-point and thus only the socket and the 
> dst from which we need to derive this. 

Strictly speaking, VXLAN *may* know the underlying interface. It can
also be set up with just local and remote IP address, or even worse, in
metadata mode where we don't know the address nor the interface until
we get a packet (and each packet may have those different).

MTU wise, those cases are not accommodated for in the kernel. The vxlan
interface gets MTU of 1500 and it's up to the administrator to set it
correctly.

Btw, PMTU events won't help with the metadata mode. And even in
"normal" mode, it's not clear what should be done - the tunnel
interface may be in a bridge, thus there may be other interfaces that
depend on the same MTU, up to inside VMs.

 Jiri