Message-ID: <20161013050413.GU19318@brightrain.aerifal.cx>
Date:   Thu, 13 Oct 2016 01:04:13 -0400
From:   Rich Felker <dalias@...c.org>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-sh@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Thomas Gleixner <tglx@...utronix.de>,
        "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
Subject: Re: [PATCH v8 2/2] clocksource: add J-Core timer/clocksource driver

On Wed, Oct 12, 2016 at 11:31:26PM +0200, Daniel Lezcano wrote:
> > > I understand the goal is to have one single configuration and everything
> > > DT based and it sounds great but what is missing here is just a subarch,
> > > not an option to enable/disable the timer.
> > > 
> > > Give a try with:
> > > 
> > > make ARCH=arm multi_v7_defconfig menuconfig
> > > 
> > > --> System Type
> > > 
> > > That is what you are looking for, a SUPERH config option selecting all the
> > > common options and then a JCORE config option adding the different missing
> > > bits, namely the CLKSRC_JCORE_PIT.
> > 
> > We do have something like "system type" in arch/sh, and it's what I'm
> > trying to deprecate since it's the switch to select between all the
> > hard-coded board files, _or_ device tree.
> > 
> > Since part of the goal of my DT overhaul is to be able (but not
> > forced) to produce kernels that run on a wide range of hardware,
> > rather than having a "system type (select one)" option, what about
> > individual boolean options like:
> > 
> > config JCORE_SOC
> > 	bool "Support for J-Core SoCs"
> > 	select CLKSRC_JCORE_PIT
> > 	select JCORE_AIC
> > 	...
> 
> I'm perfectly fine with this.
>  
> > Note that there are other drivers that should probably be optional
> > even if you have JCORE_SOC enabled, like the SPI controller, DMA
> > controller (not implemented yet), Ethernet (not submitted upstream
> > yet), etc. Maybe they could depend on JCORE_SOC and be default-yes but
> > configurable if available?
> 
> That sounds fine also.
> 
> > In any case, the SoC support is supposedly there in the current kernel
> > release (4.8) but not working because of missing essential drivers, so
> > I'd really like to fix that without making the fix dependent on
> > restructuring the arch/sh system type handling, which is an ongoing,
> > independent project for which I'm waiting for help converting and
> > testing the conversions of legacy board support. My preference would
> > be to keep the Kconfig stuff the way I submitted it for now --
> > j2_defconfig already handles enabling thse right drivers -- and do
> > something more user-friendly as part of the bigger arch overhaul
> > project.
> 
> I prefer the move the option to config JCORE_SOC. That is not a big deal
> to add this bool in the sh's Kconfig and select the timer from there.

OK, I'll do this and add the patch to my planned pull request, and
send a corresponding Kconfig patch for the interrupt controller.

> > > > > > +	/*
> > > > > > +	 * The J-Core PIT is not hard-wired to a particular IRQ, but
> > > > > > +	 * integrated with the interrupt controller such that the IRQ it
> > > > > > +	 * generates is programmable. The programming interface has a
> > > > > > +	 * legacy field which was an interrupt priority for AIC1, but
> > > > > > +	 * which is OR'd onto bits 2-5 of the generated IRQ number when
> > > > > > +	 * used with J-Core AIC2, so set it to match these bits.
> > > > > > +	 */
> > > > > > +	hwirq = irq_get_irq_data(pit_irq)->hwirq;
> > > > > > +	irqprio = (hwirq >> 2) & PIT_PRIO_MASK;
> > > > > > +	enable_val = (1U << PIT_ENABLE_SHIFT)
> > > > > > +		   | (hwirq << PIT_IRQ_SHIFT)
> > > > > > +		   | (irqprio << PIT_PRIO_SHIFT);
> > > > > > +
> > > > > 
> > > > > Why mention AIC1 if there is not test to check if AIC1 || AIC2 ?
> > > > > 
> > > > > Will be the same information available if the irqchip is AIC1 ?
> > > > 
> > > > The bit layout of the PIT enable register is:
> > > > 
> > > > 	.....e..ppppiiiiiiii............
> > > > 
> > > > where the .'s indicate unrelated/unused bits, e is enable, p is
> > > > priority, and i is hard irq number.
> > > > 
> > > > For the PIT included in AIC1 (obsolete but still in use), any hard irq
> > > > (trap number) can be programmed via the 8 iiiiiiii bits, and a
> > > > priority (0-15) is programmable separately in the pppp bits.
> > > > 
> > > > For the PIT included in AIC2 (current), the programming interface is
> > > > equivalent modulo interrupt mapping. This is why a different
> > > > compatible tag was not used. However only traps 64-127 (the ones
> > > > actually intended to be used for interrupts, rather than
> > > > syscalls/exceptions/etc.) can be programmed (the high 2 bits of i are
> > > > ignored) and the priority pppp is <<2'd and or'd onto the irq number.
> > > > This was a poor decision made on the hardware engineering side based
> > > > on a wrong assumption that preserving old priority mapping of outdated
> > > > software was important, whereas priorities weren't/aren't even being
> > > > used.
> > > > 
> > > > When we do the next round of interrupt controller improvements (AIC3)
> > > > the PIT programming interface should remain compatible with the
> > > > driver; likely the priority bits will just be ignored.
> > > > 
> > > > If we do want to change the programming interface beyond this at some
> > > > point (that maay be a good idea, since we have identified several
> > > > things that are less than ideal for Linux, like the sechi/seclo/ns
> > > > clocksource), a new compatible tag will be added instead.
> > > 
> > > Ok, thanks for the clarification. Can you add your answer as a comment for
> > > the bits dance above ?
> > 
> > Are you happy with the whole quoted text above as a comment? If so I'm
> > happy to include it verbatim. I would lean towards condensing or
> > omitting the last 2 paragraphs (starting with "When we do...") if
> > that's okay with you since they are not documenting the hw but future
> > plans/policy.
> 
> Makes sense.
> 
> Agree for the verbatim minus the last 2 paragraphs.

OK. I'll prepare a new patch with this and the previously-discussed
changes.

Rich

Powered by blists - more mailing lists