[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3974b516-d698-ab7f-efba-d768eccbd56f@st.com>
Date: Fri, 4 Nov 2016 11:15:24 +0100
From: Alexandre Torgue <alexandre.torgue@...com>
To: <gabriel.fernandez@...com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <kernel@...inux.com>
Subject: Re: [PATCH 1/2] ARM: dts: stm32f429: add LSI and LSE clocks
Gabriel,
On 11/04/2016 09:52 AM, gabriel.fernandez@...com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@...com>
>
> This patch adds lsi / lse oscillators. These clocks can be use by
> RTC clocks.
> The clock drivers needs to disable the power domain write protection using
> syscon / regmap to enable these clocks.
>
Is it the same than you sent in last series ? If yes I will take it
directly as review has already been done.
regards
Alex
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...com>
> ---
> arch/arm/boot/dts/stm32f429.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 336ee4f..2700449 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -56,6 +56,18 @@
> compatible = "fixed-clock";
> clock-frequency = <0>;
> };
> +
> + clk-lse {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + };
> +
> + clk-lsi {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + };
> };
>
> soc {
> @@ -185,6 +197,11 @@
> interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> };
>
> + pwrcfg: power-config@...07000 {
> + compatible = "syscon";
> + reg = <0x40007000 0x400>;
> + };
> +
> pin-controller {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -340,6 +357,7 @@
> compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
> reg = <0x40023800 0x400>;
> clocks = <&clk_hse>;
> + st,syscfg = <&pwrcfg>;
> };
>
> dma1: dma-controller@...26000 {
>
Powered by blists - more mailing lists