linux-kernel - Re: [PATCH v2 1/1] ARM: dmaengine: sun6i: share the dma driver with sun50i

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20161106133711.np2hm77myfd75sn2@lukather>
Date:   Sun, 6 Nov 2016 14:37:11 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Hao Zhang <hao5781286@...il.com>
Cc:     wens@...e.org, dan.j.williams@...el.com, vinod.koul@...el.com,
        dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/1] ARM: dmaengine: sun6i: share the dma driver with
 sun50i

On Sat, Nov 05, 2016 at 04:05:48PM +0800, Hao Zhang wrote:
> Add soc a64 dma support.
> 
> Signed-off-by: Hao Zhang <hao5781286@...il.com>
> ---
>  drivers/dma/sun6i-dma.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index 8346199..00fcfc7 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -1028,11 +1028,23 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
>  	.nr_max_vchans   = 34,
>  };
>  
> +/*
> + * The A64 has 8 physical channels, a maximum DRQ port id of 27,
> + * and a total of 38 usable source and destination endpoints.
> + */
> +
> +static struct sun6i_dma_config sun50i_a64_dma_cfg = {
> +	.nr_max_channels = 8,
> +	.nr_max_requests = 27,
> +	.nr_max_vchans   = 38,
> +};
> +
>  static const struct of_device_id sun6i_dma_match[] = {
>  	{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
>  	{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
>  	{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
>  	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
> +	{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },

You need to add that compatible to the DT binding documentation.

>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sun6i_dma_match);
> @@ -1110,6 +1122,13 @@ static int sun6i_dma_probe(struct platform_device *pdev)
>  	sdc->slave.dst_addr_widths		= BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
>  						  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
>  						  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
> +
> +	if (of_device_is_compatible(pdev->dev.of_node,
> +				    "allwinner,sun50i-a64-dma")) {
> +		sdc->slave.src_addr_widths	|= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +		sdc->slave.dst_addr_widths	|= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
> +	}
> +

You'll also need to change convert_buswidth, it will reject any width
higher than 4 bytes.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)