| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20161114102447.131602-3-mika.westerberg@linux.intel.com>
Date: Mon, 14 Nov 2016 12:24:46 +0200
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: linux-mtd@...ts.infradead.org
Cc: Cyrille Pitchen <cyrille.pitchen@...el.com>,
Marek Vasut <marek.vasut@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>,
Brian Norris <computersforpeace@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Lee Jones <lee.jones@...aro.org>,
Peter Tyser <ptyser@...-inc.com>, key.seong.lim@...el.com,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v5 2/3] mfd: lpc_ich: Add support for SPI serial flash host controller
Many Intel CPUs including Haswell, Broadwell and Baytrail have SPI serial
flash host controller as part of the LPC device. This will populate an MFD
cell suitable for the SPI host controller driver if we know that the LPC
device has one.
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Acked-by: Lee Jones <lee.jones@...aro.org>
---
drivers/mfd/lpc_ich.c | 92 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/lpc_ich.h | 3 ++
2 files changed, 95 insertions(+)
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index c8dee47b45d9..985bda575849 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -83,6 +83,15 @@
#define ACPIBASE_GCS_OFF 0x3410
#define ACPIBASE_GCS_END 0x3414
+#define SPIBASE_BYT 0x54
+#define SPIBASE_BYT_SZ 512
+#define SPIBASE_BYT_EN BIT(1)
+
+#define SPIBASE_LPT 0x3800
+#define SPIBASE_LPT_SZ 512
+#define BCR 0xdc
+#define BCR_WPD BIT(0)
+
#define GPIOBASE_ICH0 0x58
#define GPIOCTRL_ICH0 0x5C
#define GPIOBASE_ICH6 0x48
@@ -133,6 +142,12 @@ static struct resource gpio_ich_res[] = {
},
};
+static struct resource intel_spi_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct mfd_cell lpc_ich_wdt_cell = {
.name = "iTCO_wdt",
.num_resources = ARRAY_SIZE(wdt_ich_res),
@@ -147,6 +162,14 @@ static struct mfd_cell lpc_ich_gpio_cell = {
.ignore_resource_conflicts = true,
};
+
+static struct mfd_cell lpc_ich_spi_cell = {
+ .name = "intel-spi",
+ .num_resources = ARRAY_SIZE(intel_spi_res),
+ .resources = intel_spi_res,
+ .ignore_resource_conflicts = true,
+};
+
/* chipset related info */
enum lpc_chipsets {
LPC_ICH = 0, /* ICH */
@@ -493,10 +516,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_LPT] = {
.name = "Lynx Point",
.iTCO_version = 2,
+ .spi_type = INTEL_SPI_LPT,
},
[LPC_LPT_LP] = {
.name = "Lynx Point_LP",
.iTCO_version = 2,
+ .spi_type = INTEL_SPI_LPT,
},
[LPC_WBG] = {
.name = "Wellsburg",
@@ -510,6 +535,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_BAYTRAIL] = {
.name = "Bay Trail SoC",
.iTCO_version = 3,
+ .spi_type = INTEL_SPI_BYT,
},
[LPC_COLETO] = {
.name = "Coleto Creek",
@@ -518,10 +544,12 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_WPT_LP] = {
.name = "Wildcat Point_LP",
.iTCO_version = 2,
+ .spi_type = INTEL_SPI_LPT,
},
[LPC_BRASWELL] = {
.name = "Braswell SoC",
.iTCO_version = 3,
+ .spi_type = INTEL_SPI_BYT,
},
[LPC_LEWISBURG] = {
.name = "Lewisburg",
@@ -1054,6 +1082,64 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
return ret;
}
+static int lpc_ich_init_spi(struct pci_dev *dev)
+{
+ struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+ struct resource *res = &intel_spi_res[0];
+ struct intel_spi_boardinfo *info;
+ u32 spi_base, rcba, bcr;
+
+ info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->type = lpc_chipset_info[priv->chipset].spi_type;
+
+ switch (info->type) {
+ case INTEL_SPI_BYT:
+ pci_read_config_dword(dev, SPIBASE_BYT, &spi_base);
+ if (spi_base & SPIBASE_BYT_EN) {
+ res->start = spi_base & ~(SPIBASE_BYT_SZ - 1);
+ res->end = res->start + SPIBASE_BYT_SZ - 1;
+ }
+ break;
+
+ case INTEL_SPI_LPT:
+ pci_read_config_dword(dev, RCBABASE, &rcba);
+ if (rcba & 1) {
+ spi_base = rcba & ~(SPIBASE_LPT_SZ - 1);
+ res->start = spi_base + SPIBASE_LPT;
+ res->end = res->start + SPIBASE_LPT_SZ - 1;
+
+ /*
+ * Try to make the flash chip writeable now by
+ * setting BCR_WPD. It it fails we tell the driver
+ * that it can only read the chip.
+ */
+ pci_read_config_dword(dev, BCR, &bcr);
+ if (!(bcr & BCR_WPD)) {
+ bcr |= BCR_WPD;
+ pci_write_config_dword(dev, BCR, bcr);
+ pci_read_config_dword(dev, BCR, &bcr);
+ }
+ info->writeable = !!(bcr & BCR_WPD);
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (!res->start)
+ return -ENODEV;
+
+ lpc_ich_spi_cell.platform_data = info;
+ lpc_ich_spi_cell.pdata_size = sizeof(*info);
+
+ return mfd_add_devices(&dev->dev, PLATFORM_DEVID_NONE,
+ &lpc_ich_spi_cell, 1, NULL, 0, NULL);
+}
+
static int lpc_ich_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
@@ -1097,6 +1183,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
cell_added = true;
}
+ if (lpc_chipset_info[priv->chipset].spi_type) {
+ ret = lpc_ich_init_spi(dev);
+ if (!ret)
+ cell_added = true;
+ }
+
/*
* We only care if at least one or none of the cells registered
* successfully.
diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h
index 2b300b44f994..fba8fcb54f8c 100644
--- a/include/linux/mfd/lpc_ich.h
+++ b/include/linux/mfd/lpc_ich.h
@@ -20,6 +20,8 @@
#ifndef LPC_ICH_H
#define LPC_ICH_H
+#include <linux/platform_data/intel-spi.h>
+
/* GPIO resources */
#define ICH_RES_GPIO 0
#define ICH_RES_GPE0 1
@@ -40,6 +42,7 @@ struct lpc_ich_info {
char name[32];
unsigned int iTCO_version;
unsigned int gpio_version;
+ enum intel_spi_type spi_type;
u8 use_gpio;
};
--
2.9.3
Powered by blists - more mailing lists