[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161118190426.GC23246@dell.home>
Date: Fri, 18 Nov 2016 19:04:26 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: linux-mtd@...ts.infradead.org,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
Marek Vasut <marek.vasut@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>,
Brian Norris <computersforpeace@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Peter Tyser <ptyser@...-inc.com>, key.seong.lim@...el.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 0/3] spi-nor: Add support for Intel SPI serial flash
controller
On Mon, 14 Nov 2016, Mika Westerberg wrote:
> This is fifth version of the series. You can find the previous versions
> archived on:
>
> v4: https://lwn.net/Articles/703773/
> v3: https://lwn.net/Articles/697231/
> v2: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068277.html
> v1: https://lkml.org/lkml/2016/6/14/269
>
> This patch series adds support for the Intel SPI serial flash controller
> found on many recent Intel CPUs including Baytrail and Braswell. This
> driver makes it possible to access the BIOS and other platform data which
> is stored on the SPI serial flash. It is also possible to upgrade the BIOS
> using this driver if it has not been protected by special hardware bits.
>
> The patch [1/3] includes documentation how to upgrade BIOS on MinnowBoard
> MAX.
>
> Since poking the SPI serial flash can brick the machine, this driver can
> only be enabled when CONFIG_EXPERT=y and even then it will remain read-only
> unless instructed othwerwise by module parameter.
>
> Changes from v4:
> * Use INTEL_SPI_FIFO_SZ instead of hard coded value of 64 bytes
> * Don't increment i inside call to FDATA() macro
> * Check nor->read_opcode in intel_spi_read() and return
> -EINVAL if not supported. We may add SFDP support later on.
>
> Changes from v3:
> * Added ACKs from Lee Jones.
> * Use bus instead of dev->bus in PCI accesses
>
> Changes from v2:
> * Rebased on top of v4.8-rc2
> * Updated intel_spi_read/write() according spi-nor core changes which
> drops retlen parameter and returns number of bytes read/written.
>
> Changes from v1:
> * Older hardware does not support 64k erase command so added erase_64k
> flag which is set only for Broxton (BXT).
> * Fix protection range offset for Broxton. Now there is ispi->pregs
> pointing to the start of the protection registers.
> * Change naming of constants from BCR_BYT -> BYT_BCR and so on.
> * Drop lpc_ich_finalize_spi_cell() and initialize cell directly in
> lpc_ich_init_spi().
> * Use info->type in switch in lpc_ich_init_spi().
> * Add defines for magic numbers used in lpc_ich_init_spi().
> * Use PLATFORM_DEVID_NONE with mfd_add_devices().
>
> Mika Westerberg (3):
> spi-nor: Add support for Intel SPI serial flash controller
> mfd: lpc_ich: Add support for SPI serial flash host controller
> mfd: lpc_ich: Add support for Intel Apollo Lake SoC
What's the plan for this set?
> Documentation/mtd/intel-spi.txt | 88 ++++
> drivers/mfd/lpc_ich.c | 131 +++++
> drivers/mtd/spi-nor/Kconfig | 20 +
> drivers/mtd/spi-nor/Makefile | 2 +
> drivers/mtd/spi-nor/intel-spi-platform.c | 57 +++
> drivers/mtd/spi-nor/intel-spi.c | 791 +++++++++++++++++++++++++++++++
> drivers/mtd/spi-nor/intel-spi.h | 24 +
> include/linux/mfd/lpc_ich.h | 3 +
> include/linux/platform_data/intel-spi.h | 31 ++
> 9 files changed, 1147 insertions(+)
> create mode 100644 Documentation/mtd/intel-spi.txt
> create mode 100644 drivers/mtd/spi-nor/intel-spi-platform.c
> create mode 100644 drivers/mtd/spi-nor/intel-spi.c
> create mode 100644 drivers/mtd/spi-nor/intel-spi.h
> create mode 100644 include/linux/platform_data/intel-spi.h
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists