| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 18 Nov 2016 16:59:51 -0200
From: Mauro Carvalho Chehab <mchehab@...pensource.com>
To: Thierry Escande <thierry.escande@...labora.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@....fi>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Pawel Osciak <pawel@...iak.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>
Subject: Re: [PATCH v5] [media] vb2: Add support for
capture_dma_bidirectional queue flag
Em Tue, 25 Oct 2016 10:22:29 +0200
Thierry Escande <thierry.escande@...labora.com> escreveu:
> From: Pawel Osciak <posciak@...omium.org>
>
> When this flag is set for CAPTURE queues by the driver on calling
> vb2_queue_init(), it forces the buffers on the queue to be
> allocated/mapped with DMA_BIDIRECTIONAL direction flag instead of
> DMA_FROM_DEVICE. This allows the device not only to write to the
> buffers, but also read out from them. This may be useful e.g. for codec
> hardware which may be using CAPTURE buffers as reference to decode
> other buffers.
>
> This flag is ignored for OUTPUT queues as we don't want to allow HW to
> be able to write to OUTPUT buffers.
>
> This patch introduces 2 macros:
> VB2_DMA_DIR(q) returns the corresponding dma_dir for the passed queue
> type, tanking care of the capture_dma_birectional flag.
>
> VB2_DMA_DIR_CAPTURE(d) is a test macro returning true if the passed DMA
> direction refers to a capture buffer. This test is used to map virtual
> addresses for writing and to mark pages as dirty.
Why to add it? There's no other patch on this series with would
justify its needs...
>
> Signed-off-by: Pawel Osciak <posciak@...omium.org>
> Tested-by: Pawel Osciak <posciak@...omium.org>
> Signed-off-by: Thierry Escande <thierry.escande@...labora.com>
> ---
>
> Changes in v2:
> - Renamed use_dma_bidirectional field as capture_dma_bidirectional
> - Added a VB2_DMA_DIR() macro
>
> Changes in v3:
> - Get rid of dma_dir field and therefore squashed the previous patch
>
> Changes in v4:
> - Fixed typos in include/media/videobuf2-core.h
> - Added VB2_DMA_DIR_CAPTURE() test macro
>
> Changes in v5:
> - Use is_output queue field in VB2_DMA_DIR() macro
>
> drivers/media/v4l2-core/videobuf2-core.c | 9 +++------
> drivers/media/v4l2-core/videobuf2-dma-contig.c | 2 +-
> drivers/media/v4l2-core/videobuf2-dma-sg.c | 5 +++--
> drivers/media/v4l2-core/videobuf2-vmalloc.c | 4 ++--
> include/media/videobuf2-core.h | 23 +++++++++++++++++++++++
> 5 files changed, 32 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
> index 21900202..22d6105 100644
> --- a/drivers/media/v4l2-core/videobuf2-core.c
> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> @@ -194,8 +194,7 @@ static void __enqueue_in_driver(struct vb2_buffer *vb);
> static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
> {
> struct vb2_queue *q = vb->vb2_queue;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> void *mem_priv;
> int plane;
> int ret = -ENOMEM;
> @@ -978,8 +977,7 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb)
> void *mem_priv;
> unsigned int plane;
> int ret = 0;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> bool reacquired = vb->planes[0].mem_priv == NULL;
>
> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
> @@ -1096,8 +1094,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb)
> void *mem_priv;
> unsigned int plane;
> int ret = 0;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> bool reacquired = vb->planes[0].mem_priv == NULL;
>
> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> index fb6a177..a44e383 100644
> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> @@ -507,7 +507,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
> buf->dma_dir = dma_dir;
>
> offset = vaddr & ~PAGE_MASK;
> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
> if (IS_ERR(vec)) {
> ret = PTR_ERR(vec);
> goto fail_buf;
> diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c
> index ecff8f49..51c98f6 100644
> --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c
> +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c
> @@ -238,7 +238,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
> buf->offset = vaddr & ~PAGE_MASK;
> buf->size = size;
> buf->dma_sgt = &buf->sg_table;
> - vec = vb2_create_framevec(vaddr, size, buf->dma_dir == DMA_FROM_DEVICE);
> + vec = vb2_create_framevec(vaddr, size,
> + VB2_DMA_DIR_CAPTURE(buf->dma_dir));
> if (IS_ERR(vec))
> goto userptr_fail_pfnvec;
> buf->vec = vec;
> @@ -291,7 +292,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
> vm_unmap_ram(buf->vaddr, buf->num_pages);
> sg_free_table(buf->dma_sgt);
> while (--i >= 0) {
> - if (buf->dma_dir == DMA_FROM_DEVICE)
> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
> set_page_dirty_lock(buf->pages[i]);
> }
> vb2_destroy_framevec(buf->vec);
> diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c
> index ab3227b..76649bd 100644
> --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c
> +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c
> @@ -86,7 +86,7 @@ static void *vb2_vmalloc_get_userptr(struct device *dev, unsigned long vaddr,
> buf->dma_dir = dma_dir;
> offset = vaddr & ~PAGE_MASK;
> buf->size = size;
> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
> if (IS_ERR(vec)) {
> ret = PTR_ERR(vec);
> goto fail_pfnvec_create;
> @@ -136,7 +136,7 @@ static void vb2_vmalloc_put_userptr(void *buf_priv)
> pages = frame_vector_pages(buf->vec);
> if (vaddr)
> vm_unmap_ram((void *)vaddr, n_pages);
> - if (buf->dma_dir == DMA_FROM_DEVICE)
> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
> for (i = 0; i < n_pages; i++)
> set_page_dirty_lock(pages[i]);
> } else {
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index ac5898a..11d2e51 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -433,6 +433,9 @@ struct vb2_buf_ops {
> * @quirk_poll_must_check_waiting_for_buffers: Return POLLERR at poll when QBUF
> * has not been called. This is a vb1 idiom that has been adopted
> * also by vb2.
> + * @capture_dma_bidirectional: use DMA_BIDIRECTIONAL for CAPTURE buffers; this
> + * allows HW to read from the CAPTURE buffers in
> + * addition to writing; ignored for OUTPUT queues.
> * @lock: pointer to a mutex that protects the vb2_queue struct. The
> * driver can set this to a mutex to let the v4l2 core serialize
> * the queuing ioctls. If the driver wants to handle locking
> @@ -499,6 +502,7 @@ struct vb2_queue {
> unsigned fileio_write_immediately:1;
> unsigned allow_zero_bytesused:1;
> unsigned quirk_poll_must_check_waiting_for_buffers:1;
> + unsigned capture_dma_bidirectional:1;
>
> struct mutex *lock;
> void *owner;
> @@ -554,6 +558,25 @@ struct vb2_queue {
> #endif
> };
>
> +/*
> + * Returns the corresponding DMA direction given the vb2_queue type (capture or
> + * output). Returns DMA_BIDIRECTIONAL for capture buffers if the vb2_queue field
> + * capture_dma_bidirectional is set by the driver.
> + */
> +#define VB2_DMA_DIR(q) ((q)->is_output ? DMA_TO_DEVICE \
> + : (q)->capture_dma_bidirectional \
> + ? DMA_BIDIRECTIONAL \
> + : DMA_FROM_DEVICE)
> +
> +/*
> + * Returns true if the DMA direction passed as parameter refers to a capture
> + * buffer as capture buffers allow both FROM_DEVICE and BIDIRECTIONAL DMA
> + * direction. This test is used to map virtual addresses for writing and to mark
> + * pages as dirty.
> + */
> +#define VB2_DMA_DIR_CAPTURE(d) \
> + ((d) == DMA_FROM_DEVICE || (d) == DMA_BIDIRECTIONAL)
> +
> /**
> * vb2_plane_vaddr() - Return a kernel virtual address of a given plane
> * @vb: vb2_buffer to which the plane in question belongs to
Thanks,
Mauro
Powered by blists - more mailing lists