[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4f055736-5977-4d0f-ddf2-113c787e383a@xilinx.com>
Date: Tue, 15 Nov 2016 13:22:46 +0100
From: Michal Simek <michal.simek@...inx.com>
To: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>,
<monstr@...str.eu>, <tglx@...utronix.de>, <jason@...edaemon.net>,
<marc.zyngier@....com>
CC: <linux-kernel@...r.kernel.org>, <michal.simek@...inx.com>,
<linuxppc-dev@...ts.ozlabs.org>, <mpe@...erman.id.au>
Subject: Re: [Patch v7 1/7] microblaze: irqchip: Move intc driver to irqchip
On 14.11.2016 13:13, Zubair Lutfullah Kakakhel wrote:
> The Xilinx AXI Interrupt Controller IP block is used by the MIPS
> based xilfpga platform and a few PowerPC based platforms.
>
> Move the interrupt controller code out of arch/microblaze so that
> it can be used by everyone
>
> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
>
> ---
> V6 -> V7
> Rebase to v4.9-rc5
>
> V5 -> V6
> Rebase to v4.9-rc3
>
> V4 -> V5
> Rebase to v4.9-rc1
> Renamed back to irq-xilinx-intc.c
>
> V3 -> V4
> No change
>
> V2 -> V3
> No change here. Cleanup patches follow after this patch.
> Its debatable to cleanup before/after move. Decided to place cleanup
> after move to put history in new place.
>
> V1 -> V2
>
> Renamed irq-xilinx to irq-axi-intc
> Renamed CONFIG_XILINX_INTC to CONFIG_XILINX_AXI_INTC
> Patch is now without rename flag so as to facilitate review
> ---
> arch/microblaze/Kconfig | 1 +
> arch/microblaze/kernel/Makefile | 2 +-
> drivers/irqchip/Kconfig | 4 ++++
> drivers/irqchip/Makefile | 1 +
> arch/microblaze/kernel/intc.c => drivers/irqchip/irq-xilinx-intc.c | 0
> 5 files changed, 7 insertions(+), 1 deletion(-)
> rename arch/microblaze/kernel/intc.c => drivers/irqchip/irq-xilinx-intc.c (100%)
>
> diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
> index 86f6572..85885a5 100644
> --- a/arch/microblaze/Kconfig
> +++ b/arch/microblaze/Kconfig
> @@ -27,6 +27,7 @@ config MICROBLAZE
> select HAVE_MEMBLOCK_NODE_MAP
> select HAVE_OPROFILE
> select IRQ_DOMAIN
> + select XILINX_INTC
> select MODULES_USE_ELF_RELA
> select OF
> select OF_EARLY_FLATTREE
> diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
> index f08baca..e098381 100644
> --- a/arch/microblaze/kernel/Makefile
> +++ b/arch/microblaze/kernel/Makefile
> @@ -15,7 +15,7 @@ endif
> extra-y := head.o vmlinux.lds
>
> obj-y += dma.o exceptions.o \
> - hw_exception_handler.o intc.o irq.o \
> + hw_exception_handler.o irq.o \
> platform.o process.o prom.o ptrace.o \
> reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index bc0af33..ae96731 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -211,6 +211,10 @@ config XTENSA_MX
> bool
> select IRQ_DOMAIN
>
> +config XILINX_INTC
> + bool
> + select IRQ_DOMAIN
> +
> config IRQ_CROSSBAR
> bool
> help
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index e4dbfc8..0e55d94 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
> obj-$(CONFIG_TS4800_IRQ) += irq-ts4800.o
> obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
> obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
> +obj-$(CONFIG_XILINX_INTC) += irq-xilinx-intc.o
> obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
> obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
> obj-$(CONFIG_BCM6345_L1_IRQ) += irq-bcm6345-l1.o
> diff --git a/arch/microblaze/kernel/intc.c b/drivers/irqchip/irq-xilinx-intc.c
> similarity index 100%
> rename from arch/microblaze/kernel/intc.c
> rename to drivers/irqchip/irq-xilinx-intc.c
>
Tested-by: Michal Simek <michal.simek@...inx.com>
Thanks,
Michal
Powered by blists - more mailing lists