linux-kernel - Re: [PATCH v3 3/5] i2c: designware: Add slave definitions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 18 Nov 2016 11:01:55 -0600
From:   Rob Herring <robh@...nel.org>
To:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc:     Luis Oliveira <Luis.Oliveira@...opsys.com>, wsa@...-dreams.de,
        mark.rutland@....com, jarkko.nikula@...ux.intel.com,
        mika.westerberg@...ux.intel.com, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Ramiro.Oliveira@...opsys.com, Joao.Pinto@...opsys.com,
        CARLOS.PALMINHA@...opsys.com
Subject: Re: [PATCH v3 3/5] i2c: designware: Add slave definitions

On Fri, Nov 18, 2016 at 02:35:52PM +0200, Andy Shevchenko wrote:
> On Fri, 2016-11-18 at 11:19 +0000, Luis Oliveira wrote:
> >  - Add slave defintitions to i2c-designware-core
> >  - Changes in Kconfig to auto-enable I2C_SLAVE when compiling the
> > modules
> >  - Add compatible string to designware-core.txt explaining the
> > devicetree bindings
> > 
> 
> 
> > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> > @@ -2,7 +2,9 @@
> >  
> >  Required properties :
> >  
> > - - compatible : should be "snps,designware-i2c"
> > + - compatible : should be:
> > +   - "snps,designware-i2c" to setup the hardware block as I2C master.
> > +   - "snps,designware-i2c-slave" to setup the hardware block as I2C
> > slave.
> 
> Not sure about this one.
> 
> Compatible string is more generic than list of modes. Basically you have
> to add a property which selects mode.

Yes, agreed. And come up with a common property.

> DT people's ACK is a must for this change.
> 
> 
> --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -470,6 +470,7 @@ config I2C_DESIGNWARE_CORE
> >  config I2C_DESIGNWARE_PLATFORM
> >  	tristate "Synopsys DesignWare Platform"
> >  	select I2C_DESIGNWARE_CORE
> > +	select I2C_SLAVE
> > 
> 
> Common rule, generic dependencies usually go first
> 
> 	select I2C_SLAVE
>  	select I2C_DESIGNWARE_CORE
> 
> -- 
> Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Intel Finland Oy