linux-kernel - [PATCH 4/4] clocksource/drivers/bcm2835_timer: Unmap region obtained by of

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1479807866-6957-4-git-send-email-daniel.lezcano@linaro.org>
Date:   Tue, 22 Nov 2016 10:44:24 +0100
From:   Daniel Lezcano <daniel.lezcano@...aro.org>
To:     tglx@...utronix.de
Cc:     linux-kernel@...r.kernel.org,
        Arvind Yadav <arvind.yadav.cs@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM
        BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
        Stephen Warren <swarren@...dotorg.org>,
        Lee Jones <lee@...nel.org>, Eric Anholt <eric@...olt.net>,
        linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2835
        ARM ARCHITECTURE),
        linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2835
        ARM ARCHITECTURE)
Subject: [PATCH 4/4] clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap

From: Arvind Yadav <arvind.yadav.cs@...il.com>

Free memory mapping, if bcm2835_timer_init is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@...il.com>
Reviewed-by: Eric Anholt <eric@...olt.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
 drivers/clocksource/bcm2835_timer.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index e71acf2..f2f29d2 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -96,7 +96,7 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	ret = of_property_read_u32(node, "clock-frequency", &freq);
 	if (ret) {
 		pr_err("Can't read clock-frequency");
-		return ret;
+		goto err_iounmap;
 	}
 
 	system_clock = base + REG_COUNTER_LO;
@@ -108,13 +108,15 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	irq = irq_of_parse_and_map(node, DEFAULT_TIMER);
 	if (irq <= 0) {
 		pr_err("Can't parse IRQ");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_iounmap;
 	}
 
 	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
 	if (!timer) {
 		pr_err("Can't allocate timer struct\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_iounmap;
 	}
 
 	timer->control = base + REG_CONTROL;
@@ -133,7 +135,7 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	ret = setup_irq(irq, &timer->act);
 	if (ret) {
 		pr_err("Can't set up timer IRQ\n");
-		return ret;
+		goto err_iounmap;
 	}
 
 	clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
@@ -141,6 +143,10 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	pr_info("bcm2835: system timer (irq = %d)\n", irq);
 
 	return 0;
+
+err_iounmap:
+	iounmap(base);
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
 			bcm2835_timer_init);
-- 
2.7.4