linux-kernel - Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <cf13650b-1880-7dda-e249-9763bfe3032a@ti.com>
Date:   Tue, 22 Nov 2016 16:07:31 +0530
From:   Sekhar Nori <nsekhar@...com>
To:     Axel Haslam <ahaslam@...libre.com>, <khilman@...libre.com>,
        <david@...hnology.com>
CC:     <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over
 current gpios

On Monday 21 November 2016 10:23 PM, Axel Haslam wrote:
> The hawk board VBUS is fixed to a 5v source, and the over
> current pin is actually not connected to the SoC.
> 
> Do not reseve these gpios for OHCI as they are not related
> to usb.
> 
> Signed-off-by: Axel Haslam <ahaslam@...libre.com>

As discussed over the MMC/SD patches, this patch should be based off the
hawkboard schematic, not the LCDK schematic.

Thanks,
Sekhar