| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161123015143.GD21078@dtor-ws>
Date: Tue, 22 Nov 2016 17:51:43 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Nick Dyer <nick@...anahar.org>
Cc: Andrew Duggan <aduggan@...aptics.com>,
Chris Healy <cphealy@...il.com>,
Henrik Rydberg <rydberg@...math.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Linus Walleij <linus.walleij@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 1/2] Input: synaptics-rmi4 - add support for F34
device reflash
On Sun, Nov 20, 2016 at 07:04:01PM +0000, Nick Dyer wrote:
> Add support for updating firmware, triggered by a sysfs attribute.
>
> This patch has been tested on Synaptics S7300.
>
> Signed-off-by: Nick Dyer <nick@...anahar.org>
> Tested-by: Chris Healy <cphealy@...il.com>
Applied, thank you.
> ---
> drivers/input/rmi4/Kconfig | 11 +
> drivers/input/rmi4/Makefile | 1 +
> drivers/input/rmi4/rmi_bus.c | 3 +
> drivers/input/rmi4/rmi_driver.c | 105 ++++++---
> drivers/input/rmi4/rmi_driver.h | 24 ++
> drivers/input/rmi4/rmi_f01.c | 6 +
> drivers/input/rmi4/rmi_f34.c | 481 ++++++++++++++++++++++++++++++++++++++++
> drivers/input/rmi4/rmi_f34.h | 68 ++++++
> include/linux/rmi.h | 2 +
> 9 files changed, 670 insertions(+), 31 deletions(-)
> create mode 100644 drivers/input/rmi4/rmi_f34.c
> create mode 100644 drivers/input/rmi4/rmi_f34.h
>
> diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> index 8cbd362..9a24867 100644
> --- a/drivers/input/rmi4/Kconfig
> +++ b/drivers/input/rmi4/Kconfig
> @@ -74,6 +74,17 @@ config RMI4_F30
> Function 30 provides GPIO and LED support for RMI4 devices. This
> includes support for buttons on TouchPads and ClickPads.
>
> +config RMI4_F34
> + bool "RMI4 Function 34 (Device reflash)"
> + depends on RMI4_CORE
> + select FW_LOADER
> + help
> + Say Y here if you want to add support for RMI4 function 34.
> +
> + Function 34 provides support for upgrading the firmware on the RMI4
> + device via the firmware loader interface. This is triggered using a
> + sysfs attribute.
> +
> config RMI4_F54
> bool "RMI4 Function 54 (Analog diagnostics)"
> depends on RMI4_CORE
> diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> index a6e2752..0250abf 100644
> --- a/drivers/input/rmi4/Makefile
> +++ b/drivers/input/rmi4/Makefile
> @@ -7,6 +7,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
> rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
> rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
> rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
> +rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o
> rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
>
> # Transports
> diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
> index 84b3212..ef7a662 100644
> --- a/drivers/input/rmi4/rmi_bus.c
> +++ b/drivers/input/rmi4/rmi_bus.c
> @@ -315,6 +315,9 @@ static struct rmi_function_handler *fn_handlers[] = {
> #ifdef CONFIG_RMI4_F30
> &rmi_f30_handler,
> #endif
> +#ifdef CONFIG_RMI4_F34
> + &rmi_f34_handler,
> +#endif
> #ifdef CONFIG_RMI4_F54
> &rmi_f54_handler,
> #endif
> diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
> index 4f8d197..2b17d8c 100644
> --- a/drivers/input/rmi4/rmi_driver.c
> +++ b/drivers/input/rmi4/rmi_driver.c
> @@ -35,14 +35,24 @@
> #define RMI_DEVICE_RESET_CMD 0x01
> #define DEFAULT_RESET_DELAY_MS 100
>
> -static void rmi_free_function_list(struct rmi_device *rmi_dev)
> +void rmi_free_function_list(struct rmi_device *rmi_dev)
> {
> struct rmi_function *fn, *tmp;
> struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
>
> rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
>
> + mutex_lock(&data->irq_mutex);
> +
> + devm_kfree(&rmi_dev->dev, data->irq_memory);
> + data->irq_memory = NULL;
> + data->irq_status = NULL;
> + data->fn_irq_bits = NULL;
> + data->current_irq_mask = NULL;
> + data->new_irq_mask = NULL;
> +
> data->f01_container = NULL;
> + data->f34_container = NULL;
>
> /* Doing it in the reverse order so F01 will be removed last */
> list_for_each_entry_safe_reverse(fn, tmp,
> @@ -50,7 +60,10 @@ static void rmi_free_function_list(struct rmi_device *rmi_dev)
> list_del(&fn->node);
> rmi_unregister_function(fn);
> }
> +
> + mutex_unlock(&data->irq_mutex);
> }
> +EXPORT_SYMBOL_GPL(rmi_free_function_list);
>
> static int reset_one_function(struct rmi_function *fn)
> {
> @@ -147,24 +160,25 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
> if (!data)
> return 0;
>
> + mutex_lock(&data->irq_mutex);
> + if (!data->irq_status || !data->f01_container) {
> + mutex_unlock(&data->irq_mutex);
> + return 0;
> + }
> +
> if (!rmi_dev->xport->attn_data) {
> error = rmi_read_block(rmi_dev,
> data->f01_container->fd.data_base_addr + 1,
> data->irq_status, data->num_of_irq_regs);
> if (error < 0) {
> dev_err(dev, "Failed to read irqs, code=%d\n", error);
> + mutex_unlock(&data->irq_mutex);
> return error;
> }
> }
>
> - mutex_lock(&data->irq_mutex);
> bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
> data->irq_count);
> - /*
> - * At this point, irq_status has all bits that are set in the
> - * interrupt status register and are enabled.
> - */
> - mutex_unlock(&data->irq_mutex);
>
> /*
> * It would be nice to be able to use irq_chip to handle these
> @@ -180,6 +194,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
> if (data->input)
> input_sync(data->input);
>
> + mutex_unlock(&data->irq_mutex);
> +
> return 0;
> }
>
> @@ -244,12 +260,18 @@ static int rmi_suspend_functions(struct rmi_device *rmi_dev)
> struct rmi_function *entry;
> int retval;
>
> + mutex_lock(&data->irq_mutex);
> +
> list_for_each_entry(entry, &data->function_list, node) {
> retval = suspend_one_function(entry);
> - if (retval < 0)
> + if (retval < 0) {
> + mutex_unlock(&data->irq_mutex);
> return retval;
> + }
> }
>
> + mutex_unlock(&data->irq_mutex);
> +
> return 0;
> }
>
> @@ -278,16 +300,22 @@ static int rmi_resume_functions(struct rmi_device *rmi_dev)
> struct rmi_function *entry;
> int retval;
>
> + mutex_lock(&data->irq_mutex);
> +
> list_for_each_entry(entry, &data->function_list, node) {
> retval = resume_one_function(entry);
> - if (retval < 0)
> + if (retval < 0) {
> + mutex_unlock(&data->irq_mutex);
> return retval;
> + }
> }
>
> + mutex_unlock(&data->irq_mutex);
> +
> return 0;
> }
>
> -static int enable_sensor(struct rmi_device *rmi_dev)
> +int rmi_enable_sensor(struct rmi_device *rmi_dev)
> {
> int retval = 0;
>
> @@ -297,6 +325,7 @@ static int enable_sensor(struct rmi_device *rmi_dev)
>
> return rmi_process_interrupt_requests(rmi_dev);
> }
> +EXPORT_SYMBOL_GPL(rmi_enable_sensor);
>
> /**
> * rmi_driver_set_input_params - set input device id and other data.
> @@ -502,10 +531,9 @@ static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
> RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
> }
>
> -static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
> - int (*callback)(struct rmi_device *rmi_dev,
> - void *ctx,
> - const struct pdt_entry *entry))
> +int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
> + int (*callback)(struct rmi_device *rmi_dev,
> + void *ctx, const struct pdt_entry *entry))
> {
> int page;
> int empty_pages = 0;
> @@ -520,6 +548,7 @@ static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
>
> return retval < 0 ? retval : 0;
> }
> +EXPORT_SYMBOL_GPL(rmi_scan_pdt);
>
> int rmi_read_register_desc(struct rmi_device *d, u16 addr,
> struct rmi_register_descriptor *rdesc)
> @@ -740,19 +769,15 @@ static int rmi_count_irqs(struct rmi_device *rmi_dev,
> int *irq_count = ctx;
>
> *irq_count += pdt->interrupt_source_count;
> - if (pdt->function_number == 0x01) {
> + if (pdt->function_number == 0x01)
> data->f01_bootloader_mode =
> rmi_check_bootloader_mode(rmi_dev, pdt);
> - if (data->f01_bootloader_mode)
> - dev_warn(&rmi_dev->dev,
> - "WARNING: RMI4 device is in bootloader mode!\n");
> - }
>
> return RMI_SCAN_CONTINUE;
> }
>
> -static int rmi_initial_reset(struct rmi_device *rmi_dev,
> - void *ctx, const struct pdt_entry *pdt)
> +int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
> + const struct pdt_entry *pdt)
> {
> int error;
>
> @@ -787,6 +812,7 @@ static int rmi_initial_reset(struct rmi_device *rmi_dev,
> /* F01 should always be on page 0. If we don't find it there, fail. */
> return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
> }
> +EXPORT_SYMBOL_GPL(rmi_initial_reset);
>
> static int rmi_create_function(struct rmi_device *rmi_dev,
> void *ctx, const struct pdt_entry *pdt)
> @@ -828,6 +854,8 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
>
> if (pdt->function_number == 0x01)
> data->f01_container = fn;
> + else if (pdt->function_number == 0x34)
> + data->f34_container = fn;
>
> list_add_tail(&fn->node, &data->function_list);
>
> @@ -893,6 +921,7 @@ static int rmi_driver_remove(struct device *dev)
>
> disable_irq(irq);
>
> + rmi_f34_remove_sysfs(rmi_dev);
> rmi_free_function_list(rmi_dev);
>
> return 0;
> @@ -919,13 +948,12 @@ static inline int rmi_driver_of_probe(struct device *dev,
> }
> #endif
>
> -static int rmi_probe_interrupts(struct rmi_driver_data *data)
> +int rmi_probe_interrupts(struct rmi_driver_data *data)
> {
> struct rmi_device *rmi_dev = data->rmi_dev;
> struct device *dev = &rmi_dev->dev;
> int irq_count;
> size_t size;
> - void *irq_memory;
> int retval;
>
> /*
> @@ -941,31 +969,38 @@ static int rmi_probe_interrupts(struct rmi_driver_data *data)
> dev_err(dev, "IRQ counting failed with code %d.\n", retval);
> return retval;
> }
> +
> + if (data->f01_bootloader_mode)
> + dev_warn(&rmi_dev->dev, "Device in bootloader mode.\n");
> +
> data->irq_count = irq_count;
> data->num_of_irq_regs = (data->irq_count + 7) / 8;
>
> size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
> - irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
> - if (!irq_memory) {
> + data->irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
> + if (!data->irq_memory) {
> dev_err(dev, "Failed to allocate memory for irq masks.\n");
> return retval;
> }
>
> - data->irq_status = irq_memory + size * 0;
> - data->fn_irq_bits = irq_memory + size * 1;
> - data->current_irq_mask = irq_memory + size * 2;
> - data->new_irq_mask = irq_memory + size * 3;
> + data->irq_status = data->irq_memory + size * 0;
> + data->fn_irq_bits = data->irq_memory + size * 1;
> + data->current_irq_mask = data->irq_memory + size * 2;
> + data->new_irq_mask = data->irq_memory + size * 3;
>
> return retval;
> }
> +EXPORT_SYMBOL_GPL(rmi_probe_interrupts);
>
> -static int rmi_init_functions(struct rmi_driver_data *data)
> +int rmi_init_functions(struct rmi_driver_data *data)
> {
> struct rmi_device *rmi_dev = data->rmi_dev;
> struct device *dev = &rmi_dev->dev;
> int irq_count;
> int retval;
>
> + mutex_lock(&data->irq_mutex);
> +
> irq_count = 0;
> rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
> retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
> @@ -990,12 +1025,16 @@ static int rmi_init_functions(struct rmi_driver_data *data)
> goto err_destroy_functions;
> }
>
> + mutex_unlock(&data->irq_mutex);
> +
> return 0;
>
> err_destroy_functions:
> rmi_free_function_list(rmi_dev);
> + mutex_unlock(&data->irq_mutex);
> return retval;
> }
> +EXPORT_SYMBOL_GPL(rmi_init_functions);
>
> static int rmi_driver_probe(struct device *dev)
> {
> @@ -1100,6 +1139,10 @@ static int rmi_driver_probe(struct device *dev)
> if (retval)
> goto err;
>
> + retval = rmi_f34_create_sysfs(rmi_dev);
> + if (retval)
> + goto err;
> +
> if (data->input) {
> rmi_driver_set_input_name(rmi_dev, data->input);
> if (!rmi_dev->xport->input) {
> @@ -1117,7 +1160,7 @@ static int rmi_driver_probe(struct device *dev)
>
> if (data->f01_container->dev.driver)
> /* Driver already bound, so enable ATTN now. */
> - return enable_sensor(rmi_dev);
> + return rmi_enable_sensor(rmi_dev);
>
> return 0;
>
> diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
> index 8dfbebe..e627a3a 100644
> --- a/drivers/input/rmi4/rmi_driver.h
> +++ b/drivers/input/rmi4/rmi_driver.h
> @@ -95,12 +95,36 @@ bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
> bool rmi_is_physical_driver(struct device_driver *);
> int rmi_register_physical_driver(void);
> void rmi_unregister_physical_driver(void);
> +void rmi_free_function_list(struct rmi_device *rmi_dev);
> +int rmi_enable_sensor(struct rmi_device *rmi_dev);
> +int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
> + int (*callback)(struct rmi_device *rmi_dev, void *ctx,
> + const struct pdt_entry *entry));
> +int rmi_probe_interrupts(struct rmi_driver_data *data);
> +int rmi_init_functions(struct rmi_driver_data *data);
> +int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
> + const struct pdt_entry *pdt);
>
> char *rmi_f01_get_product_ID(struct rmi_function *fn);
>
> +#ifdef CONFIG_RMI4_F34
> +int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
> +void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev);
> +#else
> +static inline int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
> +{
> + return 0;
> +}
> +
> +static inline void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
> +{
> +}
> +#endif /* CONFIG_RMI_F34 */
> +
> extern struct rmi_function_handler rmi_f01_handler;
> extern struct rmi_function_handler rmi_f11_handler;
> extern struct rmi_function_handler rmi_f12_handler;
> extern struct rmi_function_handler rmi_f30_handler;
> +extern struct rmi_function_handler rmi_f34_handler;
> extern struct rmi_function_handler rmi_f54_handler;
> #endif
> diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
> index 2cfa9f6..cae35c6 100644
> --- a/drivers/input/rmi4/rmi_f01.c
> +++ b/drivers/input/rmi4/rmi_f01.c
> @@ -63,6 +63,8 @@ struct f01_basic_properties {
> #define RMI_F01_STATUS_CODE(status) ((status) & 0x0f)
> /* The device has lost its configuration for some reason. */
> #define RMI_F01_STATUS_UNCONFIGURED(status) (!!((status) & 0x80))
> +/* The device is in bootloader mode */
> +#define RMI_F01_STATUS_BOOTLOADER(status) ((status) & 0x40)
>
> /* Control register bits */
>
> @@ -594,6 +596,10 @@ static int rmi_f01_attention(struct rmi_function *fn,
> return error;
> }
>
> + if (RMI_F01_STATUS_BOOTLOADER(device_status))
> + dev_warn(&fn->dev,
> + "Device in bootloader mode, please update firmware\n");
> +
> if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
> dev_warn(&fn->dev, "Device reset detected.\n");
> error = rmi_dev->driver->reset_handler(rmi_dev);
> diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
> new file mode 100644
> index 0000000..03df85a
> --- /dev/null
> +++ b/drivers/input/rmi4/rmi_f34.c
> @@ -0,0 +1,481 @@
> +/*
> + * Copyright (c) 2007-2016, Synaptics Incorporated
> + * Copyright (C) 2016 Zodiac Inflight Innovations
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/rmi.h>
> +#include <linux/firmware.h>
> +#include <asm/unaligned.h>
> +#include <asm/unaligned.h>
> +
> +#include "rmi_driver.h"
> +#include "rmi_f34.h"
> +
> +static int rmi_f34_write_bootloader_id(struct f34_data *f34)
> +{
> + struct rmi_function *fn = f34->fn;
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + u8 bootloader_id[F34_BOOTLOADER_ID_LEN];
> + int ret;
> +
> + ret = rmi_read_block(rmi_dev, fn->fd.query_base_addr,
> + bootloader_id, sizeof(bootloader_id));
> + if (ret) {
> + dev_err(&fn->dev, "%s: Reading bootloader ID failed: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: writing bootloader id '%c%c'\n",
> + __func__, bootloader_id[0], bootloader_id[1]);
> +
> + ret = rmi_write_block(rmi_dev,
> + fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET,
> + bootloader_id, sizeof(bootloader_id));
> + if (ret) {
> + dev_err(&fn->dev, "Failed to write bootloader ID: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f34_command(struct f34_data *f34, u8 command,
> + unsigned int timeout, bool write_bl_id)
> +{
> + struct rmi_function *fn = f34->fn;
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + int ret;
> +
> + if (write_bl_id) {
> + ret = rmi_f34_write_bootloader_id(f34);
> + if (ret)
> + return ret;
> + }
> +
> + init_completion(&f34->v5.cmd_done);
> +
> + ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
> + if (ret) {
> + dev_err(&f34->fn->dev,
> + "%s: Failed to read cmd register: %d (command %#02x)\n",
> + __func__, ret, command);
> + return ret;
> + }
> +
> + f34->v5.status |= command & 0x0f;
> +
> + ret = rmi_write(rmi_dev, f34->v5.ctrl_address, f34->v5.status);
> + if (ret < 0) {
> + dev_err(&f34->fn->dev,
> + "Failed to write F34 command %#02x: %d\n",
> + command, ret);
> + return ret;
> + }
> +
> + if (!wait_for_completion_timeout(&f34->v5.cmd_done,
> + msecs_to_jiffies(timeout))) {
> +
> + ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
> + if (ret) {
> + dev_err(&f34->fn->dev,
> + "%s: cmd %#02x timed out: %d\n",
> + __func__, command, ret);
> + return ret;
> + }
> +
> + if (f34->v5.status & 0x7f) {
> + dev_err(&f34->fn->dev,
> + "%s: cmd %#02x timed out, status: %#02x\n",
> + __func__, command, f34->v5.status);
> + return -ETIMEDOUT;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
> +{
> + struct f34_data *f34 = dev_get_drvdata(&fn->dev);
> + int ret;
> +
> + ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
> + __func__, f34->v5.status, ret);
> +
> + if (!ret && !(f34->v5.status & 0x7f))
> + complete(&f34->v5.cmd_done);
> +
> + return 0;
> +}
> +
> +static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
> + int block_count, u8 command)
> +{
> + struct rmi_function *fn = f34->fn;
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + u16 address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET;
> + u8 start_address[] = { 0, 0 };
> + int i;
> + int ret;
> +
> + ret = rmi_write_block(rmi_dev, fn->fd.data_base_addr,
> + start_address, sizeof(start_address));
> + if (ret) {
> + dev_err(&fn->dev, "Failed to write initial zeros: %d\n", ret);
> + return ret;
> + }
> +
> + for (i = 0; i < block_count; i++) {
> + ret = rmi_write_block(rmi_dev, address,
> + data, f34->v5.block_size);
> + if (ret) {
> + dev_err(&fn->dev,
> + "failed to write block #%d: %d\n", i, ret);
> + return ret;
> + }
> +
> + ret = rmi_f34_command(f34, command, F34_IDLE_WAIT_MS, false);
> + if (ret) {
> + dev_err(&fn->dev,
> + "Failed to write command for block #%d: %d\n",
> + i, ret);
> + return ret;
> + }
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "wrote block %d of %d\n",
> + i + 1, block_count);
> +
> + data += f34->v5.block_size;
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f34_write_firmware(struct f34_data *f34, const void *data)
> +{
> + return rmi_f34_write_blocks(f34, data, f34->v5.fw_blocks,
> + F34_WRITE_FW_BLOCK);
> +}
> +
> +static int rmi_f34_write_config(struct f34_data *f34, const void *data)
> +{
> + return rmi_f34_write_blocks(f34, data, f34->v5.config_blocks,
> + F34_WRITE_CONFIG_BLOCK);
> +}
> +
> +int rmi_f34_enable_flash(struct f34_data *f34)
> +{
> + return rmi_f34_command(f34, F34_ENABLE_FLASH_PROG,
> + F34_ENABLE_WAIT_MS, true);
> +}
> +
> +static int rmi_f34_flash_firmware(struct f34_data *f34,
> + const struct rmi_f34_firmware *syn_fw)
> +{
> + struct rmi_function *fn = f34->fn;
> + int ret;
> +
> + if (syn_fw->image_size) {
> + dev_info(&fn->dev, "Erasing firmware...\n");
> + ret = rmi_f34_command(f34, F34_ERASE_ALL,
> + F34_ERASE_WAIT_MS, true);
> + if (ret)
> + return ret;
> +
> + dev_info(&fn->dev, "Writing firmware (%d bytes)...\n",
> + syn_fw->image_size);
> + ret = rmi_f34_write_firmware(f34, syn_fw->data);
> + if (ret)
> + return ret;
> + }
> +
> + if (syn_fw->config_size) {
> + /*
> + * We only need to erase config if we haven't updated
> + * firmware.
> + */
> + if (!syn_fw->image_size) {
> + dev_info(&fn->dev, "Erasing config...\n");
> + ret = rmi_f34_command(f34, F34_ERASE_CONFIG,
> + F34_ERASE_WAIT_MS, true);
> + if (ret)
> + return ret;
> + }
> +
> + dev_info(&fn->dev, "Writing config (%d bytes)...\n",
> + syn_fw->config_size);
> + ret = rmi_f34_write_config(f34,
> + &syn_fw->data[syn_fw->image_size]);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +int rmi_f34_update_firmware(struct f34_data *f34, const struct firmware *fw)
> +{
> + const struct rmi_f34_firmware *syn_fw;
> + int ret;
> +
> + syn_fw = (const struct rmi_f34_firmware *)fw->data;
> + BUILD_BUG_ON(offsetof(struct rmi_f34_firmware, data) !=
> + F34_FW_IMAGE_OFFSET);
> +
> + rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
> + "FW size:%d, checksum:%08x, image_size:%d, config_size:%d\n",
> + (int)fw->size,
> + le32_to_cpu(syn_fw->checksum),
> + le32_to_cpu(syn_fw->image_size),
> + le32_to_cpu(syn_fw->config_size));
> +
> + rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
> + "FW bootloader_id:%02x, product_id:%.*s, info: %02x%02x\n",
> + syn_fw->bootloader_version,
> + (int)sizeof(syn_fw->product_id), syn_fw->product_id,
> + syn_fw->product_info[0], syn_fw->product_info[1]);
> +
> + if (syn_fw->image_size &&
> + syn_fw->image_size != f34->v5.fw_blocks * f34->v5.block_size) {
> + dev_err(&f34->fn->dev,
> + "Bad firmware image: fw size %d, expected %d\n",
> + syn_fw->image_size,
> + f34->v5.fw_blocks * f34->v5.block_size);
> + ret = -EILSEQ;
> + goto out;
> + }
> +
> + if (syn_fw->config_size &&
> + syn_fw->config_size != f34->v5.config_blocks * f34->v5.block_size) {
> + dev_err(&f34->fn->dev,
> + "Bad firmware image: config size %d, expected %d\n",
> + syn_fw->config_size,
> + f34->v5.config_blocks * f34->v5.block_size);
> + ret = -EILSEQ;
> + goto out;
> + }
> +
> + if (syn_fw->image_size && !syn_fw->config_size) {
> + dev_err(&f34->fn->dev, "Bad firmware image: no config data\n");
> + ret = -EILSEQ;
> + goto out;
> + }
> +
> + dev_info(&f34->fn->dev, "Firmware image OK\n");
> + mutex_lock(&f34->v5.flash_mutex);
> +
> + ret = rmi_f34_flash_firmware(f34, syn_fw);
> +
> + mutex_unlock(&f34->v5.flash_mutex);
> +
> +out:
> + return ret;
> +}
> +
> +static int rmi_firmware_update(struct rmi_driver_data *data,
> + const struct firmware *fw)
> +{
> + struct device *dev = &data->rmi_dev->dev;
> + struct f34_data *f34;
> + int ret;
> +
> + if (!data->f34_container) {
> + dev_warn(dev, "%s: No F34 present!\n", __func__);
> + return -EINVAL;
> + }
> +
> + /* Only version 0 currently supported */
> + if (data->f34_container->fd.function_version != 0) {
> + dev_warn(dev, "F34 V%d not supported!\n",
> + data->f34_container->fd.function_version);
> + return -ENODEV;
> + }
> +
> + f34 = dev_get_drvdata(&data->f34_container->dev);
> +
> + /* Enter flash mode */
> + ret = rmi_f34_enable_flash(f34);
> + if (ret)
> + return ret;
> +
> + /* Tear down functions and re-probe */
> + rmi_free_function_list(data->rmi_dev);
> +
> + ret = rmi_probe_interrupts(data);
> + if (ret)
> + return ret;
> +
> + ret = rmi_init_functions(data);
> + if (ret)
> + return ret;
> +
> + if (!data->f01_bootloader_mode || !data->f34_container) {
> + dev_warn(dev, "%s: No F34 present or not in bootloader!\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> + f34 = dev_get_drvdata(&data->f34_container->dev);
> +
> + /* Perform firmware update */
> + ret = rmi_f34_update_firmware(f34, fw);
> +
> + dev_info(&f34->fn->dev, "Firmware update complete, status:%d\n", ret);
> +
> + /* Re-probe */
> + rmi_dbg(RMI_DEBUG_FN, dev, "Re-probing device\n");
> + rmi_free_function_list(data->rmi_dev);
> +
> + ret = rmi_scan_pdt(data->rmi_dev, NULL, rmi_initial_reset);
> + if (ret < 0)
> + dev_warn(dev, "RMI reset failed!\n");
> +
> + ret = rmi_probe_interrupts(data);
> + if (ret)
> + return ret;
> +
> + ret = rmi_init_functions(data);
> + if (ret)
> + return ret;
> +
> + if (data->f01_container->dev.driver)
> + /* Driver already bound, so enable ATTN now. */
> + return rmi_enable_sensor(data->rmi_dev);
> +
> + rmi_dbg(RMI_DEBUG_FN, dev, "%s complete\n", __func__);
> +
> + return ret;
> +}
> +
> +static ssize_t rmi_driver_update_fw_store(struct device *dev,
> + struct device_attribute *dattr,
> + const char *buf, size_t count)
> +{
> + struct rmi_driver_data *data = dev_get_drvdata(dev);
> + char fw_name[NAME_MAX];
> + const struct firmware *fw;
> + size_t copy_count = count;
> + int ret;
> +
> + if (count == 0 || count >= NAME_MAX)
> + return -EINVAL;
> +
> + if (buf[count - 1] == '\0' || buf[count - 1] == '\n')
> + copy_count -= 1;
> +
> + strncpy(fw_name, buf, copy_count);
> + fw_name[copy_count] = '\0';
> +
> + ret = request_firmware(&fw, fw_name, dev);
> + if (ret)
> + return ret;
> +
> + dev_info(dev, "Flashing %s\n", fw_name);
> +
> + ret = rmi_firmware_update(data, fw);
> +
> + release_firmware(fw);
> +
> + return ret ?: count;
> +}
> +
> +static DEVICE_ATTR(update_fw, 0200, NULL, rmi_driver_update_fw_store);
> +
> +static struct attribute *rmi_firmware_attrs[] = {
> + &dev_attr_update_fw.attr,
> + NULL
> +};
> +
> +static struct attribute_group rmi_firmware_attr_group = {
> + .attrs = rmi_firmware_attrs,
> +};
> +
> +static int rmi_f34_probe(struct rmi_function *fn)
> +{
> + struct f34_data *f34;
> + unsigned char f34_queries[9];
> + bool has_config_id;
> + int ret;
> +
> + f34 = devm_kzalloc(&fn->dev, sizeof(struct f34_data), GFP_KERNEL);
> + if (!f34)
> + return -ENOMEM;
> +
> + f34->fn = fn;
> + dev_set_drvdata(&fn->dev, f34);
> +
> + ret = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
> + f34_queries, sizeof(f34_queries));
> + if (ret) {
> + dev_err(&fn->dev, "%s: Failed to query properties\n",
> + __func__);
> + return ret;
> + }
> +
> + snprintf(f34->bootloader_id, sizeof(f34->bootloader_id),
> + "%c%c", f34_queries[0], f34_queries[1]);
> +
> + mutex_init(&f34->v5.flash_mutex);
> + init_completion(&f34->v5.cmd_done);
> +
> + f34->v5.block_size = get_unaligned_le16(&f34_queries[3]);
> + f34->v5.fw_blocks = get_unaligned_le16(&f34_queries[5]);
> + f34->v5.config_blocks = get_unaligned_le16(&f34_queries[7]);
> + f34->v5.ctrl_address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET +
> + f34->v5.block_size;
> + has_config_id = f34_queries[2] & (1 << 2);
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Bootloader ID: %s\n",
> + f34->bootloader_id);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Block size: %d\n",
> + f34->v5.block_size);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "FW blocks: %d\n",
> + f34->v5.fw_blocks);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "CFG blocks: %d\n",
> + f34->v5.config_blocks);
> +
> + if (has_config_id) {
> + ret = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
> + f34_queries, sizeof(f34_queries));
> + if (ret) {
> + dev_err(&fn->dev, "Failed to read F34 config ID\n");
> + return ret;
> + }
> +
> + snprintf(f34->configuration_id, sizeof(f34->configuration_id),
> + "%02x%02x%02x%02x",
> + f34_queries[0], f34_queries[1],
> + f34_queries[2], f34_queries[3]);
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Configuration ID: %s\n",
> + f34->configuration_id);
> + }
> +
> + return 0;
> +}
> +
> +int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
> +{
> + return sysfs_create_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
> +}
> +
> +void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
> +{
> + sysfs_remove_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
> +}
> +
> +struct rmi_function_handler rmi_f34_handler = {
> + .driver = {
> + .name = "rmi4_f34",
> + },
> + .func = 0x34,
> + .probe = rmi_f34_probe,
> + .attention = rmi_f34_attention,
> +};
> diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h
> new file mode 100644
> index 0000000..6cee528
> --- /dev/null
> +++ b/drivers/input/rmi4/rmi_f34.h
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright (c) 2007-2016, Synaptics Incorporated
> + * Copyright (C) 2016 Zodiac Inflight Innovations
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#ifndef _RMI_F34_H
> +#define _RMI_F34_H
> +
> +/* F34 image file offsets. */
> +#define F34_FW_IMAGE_OFFSET 0x100
> +
> +/* F34 register offsets. */
> +#define F34_BLOCK_DATA_OFFSET 2
> +
> +/* F34 commands */
> +#define F34_WRITE_FW_BLOCK 0x2
> +#define F34_ERASE_ALL 0x3
> +#define F34_READ_CONFIG_BLOCK 0x5
> +#define F34_WRITE_CONFIG_BLOCK 0x6
> +#define F34_ERASE_CONFIG 0x7
> +#define F34_ENABLE_FLASH_PROG 0xf
> +
> +#define F34_STATUS_IN_PROGRESS 0xff
> +#define F34_STATUS_IDLE 0x80
> +
> +#define F34_IDLE_WAIT_MS 500
> +#define F34_ENABLE_WAIT_MS 300
> +#define F34_ERASE_WAIT_MS 5000
> +
> +#define F34_BOOTLOADER_ID_LEN 2
> +
> +struct rmi_f34_firmware {
> + __le32 checksum;
> + u8 pad1[3];
> + u8 bootloader_version;
> + __le32 image_size;
> + __le32 config_size;
> + u8 product_id[10];
> + u8 product_info[2];
> + u8 pad2[228];
> + u8 data[];
> +};
> +
> +struct f34v5_data {
> + u16 block_size;
> + u16 fw_blocks;
> + u16 config_blocks;
> + u16 ctrl_address;
> + u8 status;
> +
> + struct completion cmd_done;
> + struct mutex flash_mutex;
> +};
> +
> +struct f34_data {
> + struct rmi_function *fn;
> +
> + unsigned char bootloader_id[5];
> + unsigned char configuration_id[9];
> +
> + struct f34v5_data v5;
> +};
> +
> +#endif /* _RMI_F34_H */
> diff --git a/include/linux/rmi.h b/include/linux/rmi.h
> index ac904bb..4096b02 100644
> --- a/include/linux/rmi.h
> +++ b/include/linux/rmi.h
> @@ -337,11 +337,13 @@ struct rmi_driver_data {
> struct rmi_device *rmi_dev;
>
> struct rmi_function *f01_container;
> + struct rmi_function *f34_container;
> bool f01_bootloader_mode;
>
> u32 attn_count;
> int num_of_irq_regs;
> int irq_count;
> + void *irq_memory;
> unsigned long *irq_status;
> unsigned long *fn_irq_bits;
> unsigned long *current_irq_mask;
> --
> 2.7.4
>
--
Dmitry
Powered by blists - more mailing lists