linux-kernel - Re: [PATCH v2 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOMZO5APWxuRmo5=QgNskxtmU-UN-P1pR1kFMZkHFMb2BPrJBQ@mail.gmail.com>
Date:   Tue, 6 Dec 2016 07:42:23 -0200
From:   Fabio Estevam <festevam@...il.com>
To:     Milo Kim <woogyom.kim@...il.com>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad

Hi Milo,

On Tue, Dec 6, 2016 at 5:08 AM, Milo Kim <woogyom.kim@...il.com> wrote:
> Poslab Savageboard is i.MX6 SoC base, but BSP code from the vendor is
> not mainline u-boot and kernel. Personal reason of using this board is
> testing etnaviv user-space driver, so I re-write device tree files based on
> mainline kernel for the first step.
>
> This patchset includes common DT file, dual and quad board files.
>
> Supported components are
>   - Display: HDMI and LVDS panel
>   - eMMC and SD card
>   - Ethernet
>   - Pinmux configuration
>   - SATA: only for Savageboard quad
>   - UART1 for debug console
>   - USB host
>
> Missing features are
>   - Audio (WM8903)
>   - USB OTG
>   - PMIC WM8326: default settings are used so no issue to bring-up the system
>   - MIPI DSI, CSI
>
> Patches are tested on the Savageboard quad but the dual version should work
> because the only difference between dual and quad is SATA support.
>
> More information in http://www.savageboard.org
>
> v2:
>   Fix DT node for regulator, phy-reset-gpios and iomuxc node.
>
> Milo Kim (3):
>   ARM: dts: imx6: Add Savageboard common file
>   ARM: dts: imx6: Support Savageboard dual
>   ARM: dts: imx6: Support Savageboard quad
>
>  arch/arm/boot/dts/imx6dl-savageboard.dts   |  50 ++++++
>  arch/arm/boot/dts/imx6q-savageboard.dts    |  54 ++++++
>  arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++

You missed to add imx6q-savageboard.dtb and imx6dl-savageboard.dtb
entries into arch/arm/boot/dts/Makefile