| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161223205635.GA10155@amd>
Date: Fri, 23 Dec 2016 21:56:35 +0100
From: Pavel Machek <pavel@....cz>
To: Sebastian Reichel <sre@...nel.org>
Cc: Sakari Ailus <sakari.ailus@....fi>, ivo.g.dimitrov.75@...il.com,
pali.rohar@...il.com, linux-media@...r.kernel.org,
galak@...eaurora.org, mchehab@....samsung.com,
linux-kernel@...r.kernel.org
Subject: Re: [RFC/PATCH] media: Add video bus switch
Hi!
Ok, this should be closer to something working. (But it does not work,
yet).
Pavel
diff --git a/Documentation/devicetree/bindings/media/video-bus-switch.txt b/Documentation/devicetree/bindings/media/video-bus-switch.txt
new file mode 100644
index 0000000..1b9f8e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-bus-switch.txt
@@ -0,0 +1,63 @@
+Video Bus Switch Binding
+========================
+
+This is a binding for a gpio controlled switch for camera interfaces. Such a
+device is used on some embedded devices to connect two cameras to the same
+interface of a image signal processor.
+
+Required properties
+===================
+
+compatible : must contain "video-bus-switch"
+switch-gpios : GPIO specifier for the gpio, which can toggle the
+ selected camera. The GPIO should be configured, so
+ that a disabled GPIO means, that the first port is
+ selected.
+
+Required Port nodes
+===================
+
+More documentation on these bindings is available in
+video-interfaces.txt in the same directory.
+
+reg : The interface:
+ 0 - port for image signal processor
+ 1 - port for first camera sensor
+ 2 - port for second camera sensor
+
+Example
+=======
+
+video-bus-switch {
+ compatible = "video-bus-switch"
+ switch-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi_switch_in: endpoint {
+ remote-endpoint = <&csi_isp>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi_switch_out1: endpoint {
+ remote-endpoint = <&csi_cam1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi_switch_out2: endpoint {
+ remote-endpoint = <&csi_cam2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 8043290..7189dfd 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -230,6 +230,15 @@
csi_switch_out1: endpoint {
remote-endpoint = <&csi_cam1>;
+ bus-type = <3>; /* CCP2 */
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ lane-polarity = <0 0>;
+ clock-inv = <0>;
+ /* Select strobe = <1> for back camera, <0> for front camera */
+ strobe = <1>;
+ crc = <0>;
+
};
};
@@ -238,6 +247,15 @@
csi_switch_out2: endpoint {
remote-endpoint = <&csi_cam2>;
+ bus-type = <3>; /* CCP2 */
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ lane-polarity = <0 0>;
+ clock-inv = <0>;
+ /* Select strobe = <1> for back camera, <0> for front camera */
+ strobe = <0>;
+ crc = <0>;
+
};
};
};
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 45c69ed..f0aa8cd 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2024,44 +2054,51 @@ enum isp_of_phy {
ISP_OF_PHY_CSIPHY2,
};
-static void isp_of_parse_node_csi1(struct device *dev,
- struct isp_bus_cfg *buscfg,
+void __isp_of_parse_node_csi1(struct device *dev,
+ struct isp_ccp2_cfg *buscfg,
struct v4l2_of_endpoint *vep)
{
- if (vep->base.port == ISP_OF_PHY_CSIPHY1)
- buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
- else
- buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
- buscfg->bus.ccp2.lanecfg.clk.pos = vep->bus.mipi_csi1.clock_lane;
- buscfg->bus.ccp2.lanecfg.clk.pol =
+ buscfg->lanecfg.clk.pos = vep->bus.mipi_csi1.clock_lane;
+ buscfg->lanecfg.clk.pol =
vep->bus.mipi_csi1.lane_polarity[0];
dev_dbg(dev, "clock lane polarity %u, pos %u\n",
- buscfg->bus.ccp2.lanecfg.clk.pol,
- buscfg->bus.ccp2.lanecfg.clk.pos);
+ buscfg->lanecfg.clk.pol,
+ buscfg->lanecfg.clk.pos);
- buscfg->bus.ccp2.lanecfg.data[0].pos = vep->bus.mipi_csi2.data_lanes[0];
- buscfg->bus.ccp2.lanecfg.data[0].pol =
+ buscfg->lanecfg.data[0].pos = vep->bus.mipi_csi2.data_lanes[0];
+ buscfg->lanecfg.data[0].pol =
vep->bus.mipi_csi2.lane_polarities[1];
dev_dbg(dev, "data lane polarity %u, pos %u\n",
- buscfg->bus.ccp2.lanecfg.data[0].pol,
- buscfg->bus.ccp2.lanecfg.data[0].pos);
+ buscfg->lanecfg.data[0].pol,
+ buscfg->lanecfg.data[0].pos);
- buscfg->bus.ccp2.strobe_clk_pol = vep->bus.mipi_csi1.clock_inv;
- buscfg->bus.ccp2.phy_layer = vep->bus.mipi_csi1.strobe;
- buscfg->bus.ccp2.ccp2_mode = vep->bus_type == V4L2_MBUS_CCP2;
+ buscfg->strobe_clk_pol = vep->bus.mipi_csi1.clock_inv;
+ buscfg->phy_layer = vep->bus.mipi_csi1.strobe;
+ buscfg->ccp2_mode = vep->bus_type == V4L2_MBUS_CCP2;
dev_dbg(dev, "clock_inv %u strobe %u ccp2 %u\n",
- buscfg->bus.ccp2.strobe_clk_pol,
- buscfg->bus.ccp2.phy_layer,
- buscfg->bus.ccp2.ccp2_mode);
+ buscfg->strobe_clk_pol,
+ buscfg->phy_layer,
+ buscfg->ccp2_mode);
/*
* FIXME: now we assume the CRC is always there.
* Implement a way to obtain this information from the
* sensor. Frame descriptors, perhaps?
*/
- buscfg->bus.ccp2.crc = 1;
+ buscfg->crc = 1;
- buscfg->bus.ccp2.vp_clk_pol = 1;
+ buscfg->vp_clk_pol = 1;
+}
+
+static void isp_of_parse_node_csi1(struct device *dev,
+ struct isp_bus_cfg *buscfg,
+ struct v4l2_of_endpoint *vep)
+{
+ if (vep->base.port == ISP_OF_PHY_CSIPHY1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
+ else
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
+ __isp_of_parse_node_csi1(dev, &buscfg->bus.ccp2, vep);
}
static void isp_of_parse_node_csi2(struct device *dev,
@@ -2099,27 +2136,8 @@ static void isp_of_parse_node_csi2(struct device *dev,
buscfg->bus.csi2.crc = 1;
}
-static int isp_of_parse_node_endpoint(struct device *dev,
- struct device_node *node,
- struct isp_async_subdev *isd)
+static int isp_endpoint_to_buscfg(struct device *dev, struct v4l2_of_endpoint vep, struct isp_bus_cfg *buscfg)
{
- struct isp_bus_cfg *buscfg;
- struct v4l2_of_endpoint vep;
- int ret;
-
- isd->bus = devm_kzalloc(dev, sizeof(*isd->bus), GFP_KERNEL);
- if (!isd->bus)
- return -ENOMEM;
-
- buscfg = isd->bus;
-
- ret = v4l2_of_parse_endpoint(node, &vep);
- if (ret)
- return ret;
-
- dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
- vep.base.port);
-
switch (vep.base.port) {
case ISP_OF_PHY_PARALLEL:
buscfg->interface = ISP_INTERFACE_PARALLEL;
@@ -2147,10 +2165,35 @@ static int isp_of_parse_node_endpoint(struct device *dev,
break;
default:
+ return -1;
+ }
+ return 0;
+}
+
+static int isp_of_parse_node_endpoint(struct device *dev,
+ struct device_node *node,
+ struct isp_async_subdev *isd)
+{
+ struct isp_bus_cfg *buscfg;
+ struct v4l2_of_endpoint vep;
+ int ret;
+
+ isd->bus = devm_kzalloc(dev, sizeof(*isd->bus), GFP_KERNEL);
+ if (!isd->bus)
+ return -ENOMEM;
+
+ buscfg = isd->bus;
+
+ ret = v4l2_of_parse_endpoint(node, &vep);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
+ vep.base.port);
+
+ if (isp_endpoint_to_buscfg(dev, vep, buscfg))
dev_warn(dev, "%s: invalid interface %u\n", node->full_name,
vep.base.port);
- break;
- }
return 0;
}
@@ -2262,6 +2305,10 @@ static int isp_of_parse_nodes(struct device *dev,
}
return notifier->num_subdevs;
+
+error:
+ of_node_put(node);
+ return -EINVAL;
}
static int isp_subdev_notifier_bound(struct v4l2_async_notifier *async,
diff --git a/drivers/media/platform/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c
index 2d1463a..d5df576 100644
--- a/drivers/media/platform/omap3isp/ispccp2.c
+++ b/drivers/media/platform/omap3isp/ispccp2.c
@@ -23,6 +23,8 @@
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
+#include <media/v4l2-of.h>
+
#include "isp.h"
#include "ispreg.h"
#include "ispccp2.h"
@@ -169,6 +171,7 @@ static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
sensor = media_entity_to_v4l2_subdev(pad->entity);
+ /* Struct isp_bus_cfg has union inside */
buscfg = &((struct isp_bus_cfg *)sensor->host_priv)->bus.ccp2;
@@ -369,6 +372,9 @@ static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
}
+void __isp_of_parse_node_csi1(struct device *dev,
+ struct isp_ccp2_cfg *buscfg,
+ struct v4l2_of_endpoint *vep);
/*
* ccp2_if_configure - Configure ccp2 with data from sensor
* @ccp2: Pointer to ISP CCP2 device
@@ -377,7 +383,7 @@ static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
*/
static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
{
- const struct isp_bus_cfg *buscfg;
+ struct isp_bus_cfg *buscfg;
struct v4l2_mbus_framefmt *format;
struct media_pad *pad;
struct v4l2_subdev *sensor;
@@ -390,6 +396,22 @@ static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
sensor = media_entity_to_v4l2_subdev(pad->entity);
buscfg = sensor->host_priv;
+ {
+ struct v4l2_subdev *subdev2;
+ struct v4l2_of_endpoint vep;
+
+ subdev2 = media_entity_to_v4l2_subdev(pad->entity);
+
+ printk("if_configure... subdev %p\n", subdev2);
+ ret = v4l2_subdev_call(subdev2, video, g_endpoint_config, &vep);
+ printk("if_configure ret %d\n", ret);
+ if (ret == 0) {
+ printk("Success: have configuration\n");
+ __isp_of_parse_node_csi1(NULL, &buscfg->bus.ccp2, &vep);
+ printk("Configured ok?\n");
+ }
+ }
+
ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
if (ret < 0)
return ret;
diff --git a/drivers/media/platform/video-bus-switch.c b/drivers/media/platform/video-bus-switch.c
index 1a5d944..f599e08 100644
--- a/drivers/media/platform/video-bus-switch.c
+++ b/drivers/media/platform/video-bus-switch.c
@@ -2,6 +2,7 @@
* Generic driver for video bus switches
*
* Copyright (C) 2015 Sebastian Reichel <sre@...nel.org>
+ * Copyright (C) 2016 Pavel Machek <pavel@....cz>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -33,9 +34,9 @@
#define CSI_SWITCH_PORTS 3
enum vbs_state {
- CSI_SWITCH_DISABLED,
- CSI_SWITCH_PORT_1,
- CSI_SWITCH_PORT_2,
+ CSI_SWITCH_DISABLED = 0,
+ CSI_SWITCH_PORT_1 = 1,
+ CSI_SWITCH_PORT_2 = 2,
};
struct vbs_src_pads {
@@ -49,6 +50,7 @@ struct vbs_data {
struct v4l2_async_notifier notifier;
struct media_pad pads[CSI_SWITCH_PORTS];
struct vbs_src_pads src_pads[CSI_SWITCH_PORTS];
+ struct v4l2_of_endpoint vep[CSI_SWITCH_PORTS];
enum vbs_state state;
};
@@ -107,6 +109,7 @@ static int vbs_of_parse_nodes(struct device *dev, struct vbs_data *pdata)
}
ssd->asd.match_type = V4L2_ASYNC_MATCH_OF;
+ pdata->vep[notifier->num_subdevs] = vep;
notifier->num_subdevs++;
}
@@ -253,6 +256,19 @@ static int vbs_s_stream(struct v4l2_subdev *sd, int enable)
return v4l2_subdev_call(subdev, video, s_stream, enable);
}
+static int vbs_g_endpoint_config(struct v4l2_subdev *sd, struct v4l2_of_endpoint *cfg)
+{
+ struct vbs_data *pdata = v4l2_get_subdevdata(sd);
+ printk("vbs_g_endpoint_config...\n");
+ printk("active port is %d\n", pdata->state);
+ *cfg = pdata->vep[pdata->state];
+
+ return -EINVAL;
+
+ return 0;
+}
+
+
static const struct v4l2_subdev_internal_ops vbs_internal_ops = {
.registered = &vbs_registered,
};
@@ -265,6 +281,7 @@ static const struct media_entity_operations vbs_media_ops = {
/* subdev video operations */
static const struct v4l2_subdev_video_ops vbs_video_ops = {
.s_stream = vbs_s_stream,
+ .g_endpoint_config = vbs_g_endpoint_config,
};
static const struct v4l2_subdev_ops vbs_ops = {
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index cf778c5..448dbb5 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -25,6 +25,7 @@
#include <media/v4l2-dev.h>
#include <media/v4l2-fh.h>
#include <media/v4l2-mediabus.h>
+#include <media/v4l2-of.h>
/* generic v4l2_device notify callback notification values */
#define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32)
@@ -415,6 +416,8 @@ struct v4l2_subdev_video_ops {
const struct v4l2_mbus_config *cfg);
int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
unsigned int *size);
+ int (*g_endpoint_config)(struct v4l2_subdev *sd,
+ struct v4l2_of_endpoint *cfg);
};
/**
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)
Powered by blists - more mailing lists