[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <778cfd63-823c-7bf6-dc9d-0f2dcb43e129@ti.com>
Date: Mon, 2 Jan 2017 16:59:35 +0530
From: Sekhar Nori <nsekhar@...com>
To: Bartosz Golaszewski <bgolaszewski@...libre.com>,
Jyri Sarha <jsarha@...com>,
Tomi Valkeinen <tomi.valkeinen@...com>,
David Airlie <airlied@...ux.ie>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
Mark Rutland <mark.rutland@....com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Peter Ujfalusi <peter.ujfalusi@...com>,
Russell King <linux@...linux.org.uk>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
CC: LKML <linux-kernel@...r.kernel.org>,
arm-soc <linux-arm-kernel@...ts.infradead.org>,
linux-drm <dri-devel@...ts.freedesktop.org>,
linux-devicetree <devicetree@...r.kernel.org>
Subject: Re: [PATCH v7 5/5] ARM: dts: da850: specify the maximum pixel clock
rate for tilcdc
On Tuesday 13 December 2016 03:39 PM, Bartosz Golaszewski wrote:
> At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
> is 37.5 MHz[1]. We must filter out any mode for which the calculated
> pixel clock rate would exceed this value.
>
> Specify the max-pixelclock property for the display node for
> da850-lcdk.
>
> [1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques
This wiki page is not really a TI datasheet and can change without
notice. I changed this to refer to
http://www.ti.com/lit/ds/symlink/am1808.pdf (SPRS653E, revised March
2014), table 6-110.
Applied to v4.11/dt
Thanks,
Sekhar
Powered by blists - more mailing lists