[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170107124026.gl447hl5bucdflyk@jack.zhora.eu>
Date: Sat, 7 Jan 2017 21:40:26 +0900
From: Andi Shyti <andi@...zian.org>
To: Chanwoo Choi <cwchoi00@...il.com>
Cc: Andi Shyti <andi.shyti@...sung.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Beomho Seo <beomho.seo@...sung.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-input@...r.kernel.org,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>,
Jaechul Lee <jcsing.lee@...sung.com>,
Andi Shyti <andi@...zian.org>, Jaechul Lee <galaxyra@...il.com>
Subject: Re: [PATCH v5 5/5] arm64: dts: exynos: Add tm2 touchkey node
Hi Chanwoo,
> >>> + touchkey@20 {
> >>> + compatible = "samsung,tm2-touchkey";
> >>> + reg = <0x20>;
> >>> + interrupt-parent = <&gpa3>;
> >>> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> >>> + vcc-supply = <&ldo32_reg>;
> >>> + vdd-supply = <&ldo33_reg>;
> >>> + };
> >>> +};
> >>> +
> >>> &ldo31_reg {
> >>> regulator-name = "TSP_VDD_1.85V_AP";
> >>> regulator-min-microvolt = <1850000>;
>
> I repiled the touchkey driver against compatible name.
> Usually, when developing the device driver, we use the specific h/w name
> but in this patch, the touckey dt node uses the h/w board name instead of
> original touckhey name.
this should be a device specifically done for the tm2 and we are
not sure who is the manufacturer of the device. In order to not
assign the device to the wrong manufacturer, we preferred calling
it Samsung as it is in a Samsung device.
Andi
Powered by blists - more mailing lists