[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGTfZH0A7zunzPrWz0HtEuKOd-Cdo543XmV=zQH2m3MzZOO8-g@mail.gmail.com>
Date: Wed, 11 Jan 2017 21:02:22 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Hoegeun Kwon <hoegeun.kwon@...sung.com>
Cc: Krzysztof Kozlowski <krzk@...nel.org>,
Rob Herring <robh@...nel.org>, thierry.reding@...il.com,
airlied@...ux.ie, Kukjin Kim <kgene@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Donghwa Lee <dh09.lee@...sung.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
dri-devel@...ts.freedesktop.org,
"jh80.chung@...sung.com" <jh80.chung@...sung.com>,
Andi Shyti <andi.shyti@...sung.com>,
Hyungwon Hwang <human.hwang@...sung.com>
Subject: Re: [PATCH v8 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding
Hi Hoegeun,
2017-01-11 15:33 GMT+09:00 Hoegeun Kwon <hoegeun.kwon@...sung.com>:
> The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
> using MIPI-DSI interfaces.
>
> Signed-off-by: Donghwa Lee <dh09.lee@...sung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang@...sung.com>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
> Tested-by: Chanwoo Choi <cw00.choi@...sung.com>
I think my tested-by tag is improper against binding documentation.
Maybe you added the my tested-by tag when you split the panel
driver because I replied my tested-by tag to panel driver.
You better to drop the my tested-by tag from only this patch
(binding documentation).
> Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
> ---
> .../bindings/display/panel/samsung,s6e3ha2.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> new file mode 100644
> index 0000000..3e7892c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> @@ -0,0 +1,26 @@
> +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
> +
> +Required properties:
> + - compatible: "samsung,s6e3ha2"
> + - reg: the virtual channel number of a DSI peripheral
> + - vdd3-supply: I/O voltage supply
> + - vci-supply: voltage supply for analog circuits
> + - reset-gpios: a GPIO spec for the reset pin (active low)
> + - enable-gpios: a GPIO spec for the panel enable pin (active high)
> + - te-gpios: a GPIO spec for the tearing effect synchronization signal
> + gpio pin (active high)
> +
> +Example:
> +&dsi {
> + ...
> +
> + panel@0 {
> + compatible = "samsung,s6e3ha2";
> + reg = <0>;
> + vdd3-supply = <&ldo27_reg>;
> + vci-supply = <&ldo28_reg>;
> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> + };
> +};
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists