| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1484215490-7494-2-git-send-email-yong.mao@mediatek.com>
Date: Thu, 12 Jan 2017 18:04:49 +0800
From: Yong Mao <yong.mao@...iatek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
yong mao <yong.mao@...iatek.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Eddie Huang <eddie.huang@...iatek.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Nicolas Boichat <drinkcat@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Javier Martinez Canillas <javier@....samsung.com>,
<linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <srv_heupstream@...iatek.com>
Subject: [PATCH 1/2] mmc: mediatek: Use data tune for CMD line tune
From: yong mao <yong.mao@...iatek.com>
CMD response CRC error may cause cannot boot up
Change to use data tune for CMD line
Separate cmd internal delay for HS200/HS400 mode
Signed-off-by: Yong Mao <yong.mao@...iatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 +
drivers/mmc/host/mtk-sd.c | 169 +++++++++++++++++++++++----
2 files changed, 149 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 0ecaad4..29c3100 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -134,6 +134,9 @@
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
+ hs200-cmd-int-delay = <26>;
+ hs400-cmd-int-delay = <14>;
+ cmd-resp-sel = <0>; /* 0: rising, 1: falling */
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
non-removable;
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 80ba034..93eb395 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -75,6 +75,7 @@
#define MSDC_PATCH_BIT1 0xb4
#define MSDC_PAD_TUNE 0xec
#define PAD_DS_TUNE 0x188
+#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
/*--------------------------------------------------------------------------*/
@@ -210,12 +211,17 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
-#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
-#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
+#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
+#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
+#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
+#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
+#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
-#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
-#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
-#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */
+#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
+#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
+#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */
+
+#define PAD_CMD_TUNE_RX_DLY3 (0x1f << 1) /* RW */
#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
@@ -236,7 +242,9 @@
#define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
#define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
-#define PAD_DELAY_MAX 32 /* PAD delay cells */
+#define PAD_DELAY_MAX 32 /* PAD delay cells */
+#define ENOUGH_MARGIN_MIN 12 /* Enough Margin */
+#define PREFER_START_POS_MAX 4 /* Prefer start position */
/*--------------------------------------------------------------------------*/
/* Descriptor Structure */
/*--------------------------------------------------------------------------*/
@@ -284,12 +292,14 @@ struct msdc_save_para {
u32 patch_bit0;
u32 patch_bit1;
u32 pad_ds_tune;
+ u32 pad_cmd_tune;
u32 emmc50_cfg0;
};
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
+ u32 pad_cmd_tune;
};
struct msdc_delay_phase {
@@ -331,6 +341,9 @@ struct msdc_host {
unsigned char timing;
bool vqmmc_enabled;
u32 hs400_ds_delay;
+ u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
+ u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
+ u32 hs200_cmd_resp_sel; /* cmd response sample selection */
bool hs400_mode; /* current eMMC will run at hs400 mode */
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
@@ -596,12 +609,21 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
*/
if (host->sclk <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->def_tune_para.pad_tune,
+ host->base + MSDC_PAD_TUNE);
} else {
- writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->saved_tune_para.iocon,
+ host->base + MSDC_IOCON);
+ writel(host->saved_tune_para.pad_tune,
+ host->base + MSDC_PAD_TUNE);
+ writel(host->saved_tune_para.pad_cmd_tune,
+ host->base + PAD_CMD_TUNE);
}
+ if (timing == MMC_TIMING_MMC_HS400)
+ sdr_set_field(host->base + PAD_CMD_TUNE,
+ MSDC_PAD_TUNE_CMDRRDLY,
+ host->hs400_cmd_int_delay);
dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing);
}
@@ -1302,7 +1324,8 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
len_final = len;
}
start += len ? len : 1;
- if (len >= 8 && start_final < 4)
+ if (len >= ENOUGH_MARGIN_MIN &&
+ start_final < PREFER_START_POS_MAX)
break;
}
@@ -1325,48 +1348,128 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
struct msdc_host *host = mmc_priv(mmc);
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
+ struct msdc_delay_phase internal_delay_phase;
u8 final_delay, final_maxlen;
+ u32 internal_delay = 0;
int cmd_err;
- int i;
+ int i, j;
+ if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+ mmc->ios.timing == MMC_TIMING_UHS_SDR104)
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRRDLY,
+ host->hs200_cmd_int_delay);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
sdr_set_field(host->base + MSDC_PAD_TUNE,
MSDC_PAD_TUNE_CMDRDLY, i);
- mmc_send_tuning(mmc, opcode, &cmd_err);
- if (!cmd_err)
- rise_delay |= (1 << i);
+ for (j = 0; j < 3; j++) {
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err) {
+ rise_delay |= (1 << i);
+ } else {
+ rise_delay &= ~(1 << i);
+ break;
+ }
+ }
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
- if (final_rise_delay.maxlen >= 10 ||
- (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
+ if (final_rise_delay.maxlen >= ENOUGH_MARGIN_MIN &&
+ final_rise_delay.start < PREFER_START_POS_MAX)
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
sdr_set_field(host->base + MSDC_PAD_TUNE,
MSDC_PAD_TUNE_CMDRDLY, i);
- mmc_send_tuning(mmc, opcode, &cmd_err);
- if (!cmd_err)
- fall_delay |= (1 << i);
+ for (j = 0; j < 3; j++) {
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err) {
+ fall_delay |= (1 << i);
+ } else {
+ fall_delay &= ~(1 << i);
+ break;
+ };
+ }
}
final_fall_delay = get_best_delay(host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
+ if (final_fall_delay.maxlen >= ENOUGH_MARGIN_MIN &&
+ final_fall_delay.start < PREFER_START_POS_MAX)
+ final_maxlen = final_fall_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
+ if (host->hs200_cmd_int_delay)
+ goto skip_internal;
+ for (i = 0; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRRDLY, i);
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err)
+ internal_delay |= (1 << i);
+ }
+ dev_info(host->dev, "Final internal delay: 0x%x\n", internal_delay);
+ internal_delay_phase = get_best_delay(host, internal_delay);
+ sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
+ internal_delay_phase.final_phase);
+skip_internal:
+ dev_info(host->dev, "Final cmd pad delay: %x\n", final_delay);
+ return final_delay == 0xff ? -EIO : 0;
+}
+
+static int hs400_tune_response(struct mmc_host *mmc, u32 opcode)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ u32 cmd_delay = 0;
+ struct msdc_delay_phase final_cmd_delay = { 0,};
+ u8 final_delay;
+ int cmd_err;
+ int i, j;
+
+ /* select EMMC50 PAD CMD tune */
+ sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0));
+
+ if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+ mmc->ios.timing == MMC_TIMING_UHS_SDR104)
+ sdr_set_field(host->base + MSDC_PAD_TUNE,
+ MSDC_PAD_TUNE_CMDRRDLY,
+ host->hs200_cmd_int_delay);
+ sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_RSPL,
+ host->hs200_cmd_resp_sel);
+ for (i = 0 ; i < PAD_DELAY_MAX; i++) {
+ sdr_set_field(host->base + PAD_CMD_TUNE,
+ PAD_CMD_TUNE_RX_DLY3, i);
+ for (j = 0; j < 3; j++) {
+ mmc_send_tuning(mmc, opcode, &cmd_err);
+ if (!cmd_err) {
+ cmd_delay |= (1 << i);
+ } else {
+ cmd_delay &= ~(1 << i);
+ break;
+ }
+ }
+ }
+ final_cmd_delay = get_best_delay(host, cmd_delay);
+ sdr_set_field(host->base + PAD_CMD_TUNE, PAD_CMD_TUNE_RX_DLY3,
+ final_cmd_delay.final_phase);
+ final_delay = final_cmd_delay.final_phase;
+
+ dev_info(host->dev, "Final cmd pad delay: %x\n", final_delay);
return final_delay == 0xff ? -EIO : 0;
}
@@ -1389,7 +1492,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
- if (final_rise_delay.maxlen >= 10 ||
+ if (final_rise_delay.maxlen >= ENOUGH_MARGIN_MIN ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
@@ -1422,6 +1525,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
final_delay = final_fall_delay.final_phase;
}
+ dev_info(host->dev, "Final data pad delay: %x\n", final_delay);
return final_delay == 0xff ? -EIO : 0;
}
@@ -1430,10 +1534,13 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct msdc_host *host = mmc_priv(mmc);
int ret;
+ if (host->hs400_mode)
+ ret = hs400_tune_response(mmc, opcode);
+ else
ret = msdc_tune_response(mmc, opcode);
if (ret == -EIO) {
dev_err(host->dev, "Tune response fail!\n");
- return ret;
+ goto out;
}
if (host->hs400_mode == false) {
ret = msdc_tune_data(mmc, opcode);
@@ -1443,6 +1550,8 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
+out:
return ret;
}
@@ -1553,6 +1662,18 @@ static int msdc_drv_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
host->hs400_ds_delay);
+ if (!of_property_read_u32(pdev->dev.of_node, "hs200-cmd-int-delay",
+ &host->hs200_cmd_int_delay))
+ dev_dbg(&pdev->dev, "host->hs200-cmd-int-delay: %x\n",
+ host->hs200_cmd_int_delay);
+ if (!of_property_read_u32(pdev->dev.of_node, "hs400-cmd-int-delay",
+ &host->hs400_cmd_int_delay))
+ dev_dbg(&pdev->dev, "host->hs400-cmd-int-delay: %x\n",
+ host->hs400_cmd_int_delay);
+ if (!of_property_read_u32(pdev->dev.of_node, "cmd-resp-sel",
+ &host->hs200_cmd_resp_sel))
+ dev_dbg(&pdev->dev, "host->hs200_cmd-resp-sel: %x\n",
+ host->hs200_cmd_resp_sel);
host->dev = &pdev->dev;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
@@ -1663,6 +1784,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
+ host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
}
@@ -1675,6 +1797,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
+ writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
}
--
1.7.9.5
Powered by blists - more mailing lists