lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 26 Jan 2017 21:04:18 +0530 From: Kishon Vijay Abraham I <kishon@...com> To: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@...adcom.com>, Rob Herring <robh+dt@...nel.org>, Mark Rutland <mark.rutland@....com>, Russell King <linux@...linux.org.uk>, Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>, Jon Mason <jonmason@...adcom.com>, Florian Fainelli <f.fainelli@...il.com> CC: <bcm-kernel-feedback-list@...adcom.com>, <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org> Subject: Re: [PATCH v2 0/4] USB support for Broadcom NSP SoC On Tuesday 17 January 2017 09:44 PM, Yendapally Reddy Dhananjaya Reddy wrote: > This patch set contains the usb support for Broadcom NSP SoC. The > usb3 phy is internal to the SoC and is accessed through mdio interface. > The mdio interface can be used to access either internal usb3 phy or > external ethernet phy using a multiplexer. > > The first patch provides the documentation details for usb3 phy. The > second patch provides the changes to the mdio bus driver. The third > patch provides the phy driver and fourth patch provides the enable > method for usb. merged the 1st and 4th patch to linux-phy. Thanks Kishon > > This patch series has been tested on NSP bcm958625HR board. > This patch series is based on v4.10.0-rc3 and is available from > github-repo: https://github.com/Broadcom/cygnus-linux.git > branch:nsp-usb-v2 > > Changes in v2: > * Remove separate nsp mux driver as suggested by Andrew Lunn > * Addressed comments from Scott and Rob > > Yendapally Reddy Dhananjaya Reddy (4): > dt-bindings: phy: Add documentation for NSP USB3 PHY > net: phy: Initialize mdio clock at probe function > phy: Add USB3 PHY support for Broadcom NSP SoC > arm: dts: nsp: Add USB nodes to device tree > > .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 +++++ > arch/arm/boot/dts/bcm-nsp.dtsi | 56 +++++++ > arch/arm/boot/dts/bcm958625k.dts | 16 ++ > drivers/net/phy/mdio-bcm-iproc.c | 6 +- > drivers/phy/Kconfig | 8 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-bcm-nsp-usb3.c | 176 +++++++++++++++++++++ > 7 files changed, 298 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt > create mode 100644 drivers/phy/phy-bcm-nsp-usb3.c >
Powered by blists - more mailing lists