linux-kernel - Re: [PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 27 Jan 2017 22:27:06 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Florian Vaussard <florian.vaussard@...g-vd.ch>
Cc:     Chen-Yu Tsai <wens@...e.org>, Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-mmc@...r.kernel.org, Andre Przywara <andre.przywara@....com>
Subject: Re: [PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support

Hi Florian,

On Fri, Jan 27, 2017 at 11:37:27AM +0100, Florian Vaussard wrote:
> Hi Maxime,
> 
> On 01/26/2017 10:05 AM, Maxime Ripard wrote:
> > Hi,
> > 
> > Here is a new attempt at getting the MMC controllers running, following the
> > work done by Andre.
> > 
> > This has been tested on a board with one SDIO device (a Marvell WiFi chip)
> > and a Kingston eMMC with 1.8V IOs.
> > 
> > For SDIO, the HS DDR mode works just fine. That serie also enables the
> > SDR104 mode to work on the devices that are capable of this.
> > 
> > For the eMMC, HS200 with the voltage switch works. HS400 doesn't at the
> > moment, but since it's significantly more complex, and at the same time
> > Allwinner recommends to limit its frequency to 100MHz, this doesn't have
> > any benefits. If there's any at some point, this can be added later.
> > 
> > Let me know what you think,
> > Maxime
> > 
> 
> FWIW I tested this series and got decent throughput (190 Mbps in UDP) with a
> Marvell SDIO Wifi chip. The board becomes unresponsive between 30 to 60 minutes
> of iperf torture, but I strongly suspect a hardware issue underneath. Feel free
> to add my Tested-by on the MMC patches if you need it.

Thanks for testing!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)