linux-kernel - Re: [PATCH v3 12/24] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable

Open Source and information security mailing list archives

Message-ID: <20170130201953.GO20076@art_vandelay>
Date:   Mon, 30 Jan 2017 15:19:53 -0500
From:   Sean Paul <seanpaul@...omium.org>
To:     John Keeping <john@...anate.com>
Cc:     Mark Yao <mark.yao@...k-chips.com>, linux-kernel@...r.kernel.org,
        dri-devel@...ts.freedesktop.org,
        linux-rockchip@...ts.infradead.org,
        Chris Zhong <zyw@...k-chips.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 12/24] drm/rockchip: dw-mipi-dsi: allow commands in
 panel_disable

On Sun, Jan 29, 2017 at 01:24:32PM +0000, John Keeping wrote:
> Panel drivers may want to sent commands during the disable function, for
> example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends.  In order
> to send commands we need to write to registers, so pclk must be enabled.
> 
> While changing this, remove the unnecessary code after the panel
> unprepare call which seems to be a workaround for a specific panel and
> thus belongs in the panel driver.

Do you know which panel? If the panel driver is upstream, we should make sure we
migrate this hack before removing it here. If it's downstream somewhere,

Reviewed-by: Sean Paul <seanpaul@...omium.org>

> 
> Signed-off-by: John Keeping <john@...anate.com>
> Reviewed-by: Chris Zhong <zyw@...k-chips.com>
> ---
> v3:
> - Add Chris' Reviewed-by
> Unchanged in v2
> 
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 12 ++----------
>  1 file changed, 2 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index 7ada6d8ed143..290282e86d16 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -846,24 +846,16 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
>  {
>  	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
>  
> -	drm_panel_disable(dsi->panel);
> -
>  	if (clk_prepare_enable(dsi->pclk)) {
>  		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>  		return;
>  	}
>  
> +	drm_panel_disable(dsi->panel);
> +
>  	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>  	drm_panel_unprepare(dsi->panel);
> -	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>  
> -	/*
> -	 * This is necessary to make sure the peripheral will be driven
> -	 * normally when the display is enabled again later.
> -	 */
> -	msleep(120);
> -
> -	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>  	dw_mipi_dsi_disable(dsi);
>  	clk_disable_unprepare(dsi->pclk);
>  }
> -- 
> 2.11.0.197.gb556de5.dirty
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives