[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFp+6iGCcTsELQQJ2n9MyS3S-3FWjTvSOEXGX3xpWwqH+7uSYQ@mail.gmail.com>
Date: Thu, 9 Feb 2017 11:45:35 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: Peter Chen <hzpeterchen@...il.com>
Cc: Jack Pham <jackp@...eaurora.org>, Peter Chen <peter.chen@....com>,
Greg KH <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>,
Ulf Hansson <ulf.hansson@...aro.org>, broonie@...nel.org,
sre@...nel.org, "robh+dt" <robh+dt@...nel.org>,
shawnguo@...nel.org, rjw@...ysocki.net, dbaryshkov@...il.com,
Heiko Stübner <heiko@...ech.de>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, p.zabel@...gutronix.de,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Linux USB Mailing List <linux-usb@...r.kernel.org>,
Arnd Bergmann <arnd@...db.de>, s.hauer@...gutronix.de,
mail@...iej.szmigiero.name, troy.kisky@...ndarydevices.com,
festevam@...il.com, oscar@...andei.net,
Stephen Boyd <stephen.boyd@...aro.org>,
linux-pm@...r.kernel.org, stillcompiling@...il.com,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
mka@...omium.org, vaibhav.hiremath@...aro.org,
gary.bisson@...ndarydevices.com, Hans Verkuil <hverkuil@...all.nl>,
krzk@...nel.org, Sriram Dash <sriram.dash@....com>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Roger Quadros <rogerq@...com>
Subject: Re: [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration
On Thu, Feb 9, 2017 at 7:11 AM, Peter Chen <hzpeterchen@...il.com> wrote:
> On Wed, Feb 08, 2017 at 12:43:00PM -0800, Jack Pham wrote:
>> Hi Peter, Sriram, Arnd,
>>
>> On Mon, Feb 06, 2017 at 05:13:38PM +0800, Peter Chen wrote:
>> > From: Arnd Bergmann <arnd@...db.de>
>> >
>> > For xhci-hcd platform device, all the DMA parameters are not
>> > configured properly, notably dma ops for dwc3 devices. So, set
>> > the dma for xhci from sysdev. sysdev is pointing to device that
>> > is known to the system firmware or hardware.
>> >
>> > Signed-off-by: Arnd Bergmann <arnd@...db.de>
>> > Signed-off-by: Sriram Dash <sriram.dash@....com>
>> > Tested-by: Baolin Wang <baolin.wang@...aro.org>
>> > Tested-by: Vivek Gautam <vivek.gautam@...eaurora.org>
>> > Tested-by: Alexander Sverdlin <alexander.sverdlin@...ia.com>
>> > Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
>> > ---
>> > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> > index 6d33b42..7a9c860 100644
>> > --- a/drivers/usb/host/xhci-plat.c
>> > +++ b/drivers/usb/host/xhci-plat.c
>>
>> > - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
>> > + hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
>> > + dev_name(&pdev->dev), NULL);
>>
>> As mentioned already in [1], usb_create_shared_hcd() is called to create
>> the second bus, however it also needs to be converted.
>>
>> Not exactly as Roger's suggestion but this worked for me:
>>
>> - xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
>> + xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
>> dev_name(&pdev->dev), hcd);
>> if (!xhci->shared_hcd) {
>> ret = -ENOMEM;
>>
>> Without this, SuperSpeed devices fail to enumerate:
>>
>> usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
>> usb 2-1: device descriptor read/8, error -11
>> usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
>> usb 2-1: device descriptor read/8, error -11
>> usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
>> usb 2-1: device descriptor read/8, error -11
>> usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
>> usb 2-1: device descriptor read/8, error -11
>> <and continues...>
>>
>> Thanks,
>> Jack
>>
>
> Do you work at same platform with Vivek Gautam? I see his tested-by
> tag in this patch.
The patches [1] had worked for me on 4.9-rc4.
But with
(a) usb-next merged on 4.10-rc7
(b) this patch and [PATCH 3/9] in this series:
[PATCH v12 3/9] usb: separate out sysdev pointer from usb_bus
and,
(c) phy patches for msm8996 [2] along with necessary device tree patches
I get a hang when SuperSpeed device is being enumerated on db820c.
The change above suggested by Jack works for me too, and i hope that's
the right way to do things.
I can give a Tested-by again with the changes for shared_hcd in the
next version.
[1] https://lkml.org/lkml/2016/11/17/339
[2] https://lkml.org/lkml/2017/1/10/225
>
> I have no dwc3 platform to test, I only got patches from [1], and rebase to
> Greg's usb-next, the rebase has a conflict, and I made a
> change which is similar to revert below patch, but it is definitely
> not your problem.
>
> commit 488dc164914ff5ce5e913abd32048d28fc0d06b8
> Author: Mathias Nyman <mathias.nyman@...ux.intel.com>
> Date: Fri Jan 20 15:38:24 2017 +0200
>
> xhci: remove WARN_ON if dma mask is not set for platform devices
>
>
> [1] http://www.spinics.net/lists/linux-usb/msg152375.html
>
> --
>
> Best Regards,
> Peter Chen
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists