[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170209014113.GB460@b29397-desktop>
Date: Thu, 9 Feb 2017 09:41:13 +0800
From: Peter Chen <hzpeterchen@...il.com>
To: Jack Pham <jackp@...eaurora.org>
Cc: Peter Chen <peter.chen@....com>, gregkh@...uxfoundation.org,
stern@...land.harvard.edu, ulf.hansson@...aro.org,
broonie@...nel.org, sre@...nel.org, robh+dt@...nel.org,
shawnguo@...nel.org, rjw@...ysocki.net, dbaryshkov@...il.com,
heiko@...ech.de, linux-arm-kernel@...ts.infradead.org,
p.zabel@...gutronix.de, devicetree@...r.kernel.org,
pawel.moll@....com, mark.rutland@....com,
linux-usb@...r.kernel.org, arnd@...db.de, s.hauer@...gutronix.de,
mail@...iej.szmigiero.name, troy.kisky@...ndarydevices.com,
festevam@...il.com, oscar@...andei.net, stephen.boyd@...aro.org,
linux-pm@...r.kernel.org, stillcompiling@...il.com,
linux-kernel@...r.kernel.org, mka@...omium.org,
vaibhav.hiremath@...aro.org, gary.bisson@...ndarydevices.com,
hverkuil@...all.nl, krzk@...nel.org,
Sriram Dash <sriram.dash@....com>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Roger Quadros <rogerq@...com>
Subject: Re: [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration
On Wed, Feb 08, 2017 at 12:43:00PM -0800, Jack Pham wrote:
> Hi Peter, Sriram, Arnd,
>
> On Mon, Feb 06, 2017 at 05:13:38PM +0800, Peter Chen wrote:
> > From: Arnd Bergmann <arnd@...db.de>
> >
> > For xhci-hcd platform device, all the DMA parameters are not
> > configured properly, notably dma ops for dwc3 devices. So, set
> > the dma for xhci from sysdev. sysdev is pointing to device that
> > is known to the system firmware or hardware.
> >
> > Signed-off-by: Arnd Bergmann <arnd@...db.de>
> > Signed-off-by: Sriram Dash <sriram.dash@....com>
> > Tested-by: Baolin Wang <baolin.wang@...aro.org>
> > Tested-by: Vivek Gautam <vivek.gautam@...eaurora.org>
> > Tested-by: Alexander Sverdlin <alexander.sverdlin@...ia.com>
> > Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
> > ---
> > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> > index 6d33b42..7a9c860 100644
> > --- a/drivers/usb/host/xhci-plat.c
> > +++ b/drivers/usb/host/xhci-plat.c
>
> > - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
> > + hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
> > + dev_name(&pdev->dev), NULL);
>
> As mentioned already in [1], usb_create_shared_hcd() is called to create
> the second bus, however it also needs to be converted.
>
> Not exactly as Roger's suggestion but this worked for me:
>
> - xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
> + xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
> dev_name(&pdev->dev), hcd);
> if (!xhci->shared_hcd) {
> ret = -ENOMEM;
>
> Without this, SuperSpeed devices fail to enumerate:
>
> usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
> usb 2-1: device descriptor read/8, error -11
> usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
> usb 2-1: device descriptor read/8, error -11
> usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
> usb 2-1: device descriptor read/8, error -11
> usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
> usb 2-1: device descriptor read/8, error -11
> <and continues...>
>
> Thanks,
> Jack
>
Do you work at same platform with Vivek Gautam? I see his tested-by
tag in this patch.
I have no dwc3 platform to test, I only got patches from [1], and rebase to
Greg's usb-next, the rebase has a conflict, and I made a
change which is similar to revert below patch, but it is definitely
not your problem.
commit 488dc164914ff5ce5e913abd32048d28fc0d06b8
Author: Mathias Nyman <mathias.nyman@...ux.intel.com>
Date: Fri Jan 20 15:38:24 2017 +0200
xhci: remove WARN_ON if dma mask is not set for platform devices
[1] http://www.spinics.net/lists/linux-usb/msg152375.html
--
Best Regards,
Peter Chen
Powered by blists - more mailing lists