| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB5PR0401MB1813965DDC8CC6CD0BD85980FE440@DB5PR0401MB1813.eurprd04.prod.outlook.com>
Date: Fri, 10 Feb 2017 07:45:56 +0000
From: Jerry Huang <jerry.huang@....com>
To: Jerry Huang <jerry.huang@....com>,
"balbi@...nel.org" <balbi@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>
CC: "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Rajesh Bhagat <rajesh.bhagat@....com>
Subject: RE: [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst type
> -----Original Message-----
> From: Changming Huang [mailto:jerry.huang@....com]
> Sent: Wednesday, January 18, 2017 4:12 PM
> To: balbi@...nel.org; robh+dt@...nel.org; mark.rutland@....com;
> catalin.marinas@....com
> Cc: linux-usb@...r.kernel.org; linux-kernel@...r.kernel.org;
> devicetree@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; Jerry
> Huang <jerry.huang@....com>; Rajesh Bhagat <rajesh.bhagat@....com>
> Subject: [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst
> type
>
> Enable the undefined length INCR burst type and set INCRx.
> Different platform may has the different burst size type.
> In order to get best performance, we need to tune the burst size to one
> special value, instead of the default value.
>
> Signed-off-by: Changming Huang <jerry.huang@....com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@....com>
> ---
> Changes in v4:
> - Modify the codes according to the definition of this property.
> Changes in v3:
> - add new property for INCR burst in usb node to reset GSBUSCFG0.
> Changes in v2:
> - split patch
> - create one new function to handle soc bus configuration register.
>
> drivers/usb/dwc3/core.c | 83
> +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/dwc3/core.h | 7 ++++
> 2 files changed, 90 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
> 369bab1..446aec3 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -650,6 +650,87 @@ static void dwc3_core_setup_global_control(struct
> dwc3 *dwc)
> dwc3_writel(dwc->regs, DWC3_GCTL, reg); }
>
> +/* set global soc bus configuration registers */ static void
> +dwc3_set_soc_bus_cfg(struct dwc3 *dwc) {
> + struct device *dev = dwc->dev;
> + u32 *vals;
> + u32 cfg;
> + int ntype;
> + int ret;
> + int i;
> +
> + cfg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
> +
> + /*
> + * Handle property "snps,incr-burst-type-adjustment".
> + * Get the number of value from this property:
> + * result <= 0, means this property is not supported.
> + * result = 1, means INCRx burst mode supported.
> + * result > 1, means undefined length burst mode supported.
> + */
> + ntype = device_property_read_u32_array(dev,
> + "snps,incr-burst-type-adjustment", NULL, 0);
> + if (ntype > 0) {
> + vals = kcalloc(ntype, sizeof(u32), GFP_KERNEL);
> + if (!vals) {
> + dev_err(dev, "Error to get memory\n");
> + return;
> + }
> + /* Get INCR burst type, and parse it */
> + ret = device_property_read_u32_array(dev,
> + "snps,incr-burst-type-adjustment", vals, ntype);
> + if (ret) {
> + dev_err(dev, "Error to get property\n");
> + return;
> + }
> + *(dwc->incrx_type + 1) = vals[0];
> + if (ntype > 1) {
> + *dwc->incrx_type = 1;
> + for (i = 1; i < ntype; i++) {
> + if (vals[i] > *(dwc->incrx_type + 1))
> + *(dwc->incrx_type + 1) = vals[i];
> + }
> + } else
> + *dwc->incrx_type = 0;
> +
> + /* Enable Undefined Length INCR Burst and Enable INCRx
> Burst */
> + cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK;
> + if (*dwc->incrx_type)
> + cfg |= DWC3_GSBUSCFG0_INCRBRSTENA;
> + switch (*(dwc->incrx_type + 1)) {
> + case 256:
> + cfg |= DWC3_GSBUSCFG0_INCR256BRSTENA;
> + break;
> + case 128:
> + cfg |= DWC3_GSBUSCFG0_INCR128BRSTENA;
> + break;
> + case 64:
> + cfg |= DWC3_GSBUSCFG0_INCR64BRSTENA;
> + break;
> + case 32:
> + cfg |= DWC3_GSBUSCFG0_INCR32BRSTENA;
> + break;
> + case 16:
> + cfg |= DWC3_GSBUSCFG0_INCR16BRSTENA;
> + break;
> + case 8:
> + cfg |= DWC3_GSBUSCFG0_INCR8BRSTENA;
> + break;
> + case 4:
> + cfg |= DWC3_GSBUSCFG0_INCR4BRSTENA;
> + break;
> + case 1:
> + break;
> + default:
> + dev_err(dev, "Invalid property\n");
> + break;
> + }
> + }
> +
> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg); }
> +
> /**
> * dwc3_core_init - Low-level initialization of DWC3 Core
> * @dwc: Pointer to our controller context structure @@ -698,6 +779,8 @@
> static int dwc3_core_init(struct dwc3 *dwc)
> /* Adjust Frame Length */
> dwc3_frame_length_adjustment(dwc);
>
> + dwc3_set_soc_bus_cfg(dwc);
> +
> usb_phy_set_suspend(dwc->usb2_phy, 0);
> usb_phy_set_suspend(dwc->usb3_phy, 0);
> ret = phy_power_on(dwc->usb2_generic_phy);
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index
> 065aa6f..9df6304 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -805,6 +805,7 @@ struct dwc3_scratchpad_array {
> * @regs: base address for our registers
> * @regs_size: address space size
> * @fladj: frame length adjustment
> + * @incrx_type: INCR burst type adjustment
> * @irq_gadget: peripheral controller's IRQ number
> * @nr_scratch: number of scratch buffers
> * @u1u2: only used on revisions <1.83a for workaround @@ -928,6 +929,12
> @@ struct dwc3 {
> enum usb_phy_interface hsphy_mode;
>
> u32 fladj;
> + /*
> + * For INCR burst type.
> + * First field: for undefined length INCR burst type enable.
> + * Second field: for INCRx burst type enable
> + */
> + u32 incrx_type[2];
> u32 irq_gadget;
> u32 nr_scratch;
> u32 u1u2;
> --
> 1.7.9.5
Hi, Balbi and all guys,
Any comment for these patches? Can they be accepted?
Powered by blists - more mailing lists