| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170225102649.GB6537@griffinp-mac>
Date: Sat, 25 Feb 2017 10:26:49 +0000
From: Peter Griffin <peter.griffin@...aro.org>
To: Jiancheng Xue <xuejiancheng@...ilicon.com>
Cc: robh+dt@...nel.org, catalin.marinas@....com, will.deacon@....com,
arnd@...db.de, xuwei5@...ilicon.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
elder@...aro.org, mark.gregotski@...aro.org,
hermit.wangheming@...ilicon.com, yanhaifeng@...ilicon.com
Subject: Re: [PATCH v2 2/2] arm64: dts: hisilicon: add dts files for
hi3798cv200-poplar board
On Wed, 22 Feb 2017, Jiancheng Xue wrote:
> Add basic dts files for hi3798cv200-poplar board. Poplar is the
> first development board compliant with the 96Boards Enterprise
> edition TV Platform specification. The board features the
> Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53
> processor and high performance Mali T720 GPU.
>
> Signed-off-by: Jiancheng Xue <xuejiancheng@...ilicon.com>
> Reviewed-by: Alex Elder <elder@...aro.org>
Acked-by: Peter Griffin <peter.griffin@...aro.org>
> ---
> Changed Log:
> v2:
> - Fixed issues pointed by Rob Herring.
> 1. Moved the led node out of the soc node.
> 2. Restrained the ranges property of soc node smaller.
> - Refined the patch according to Andreas's suggestions.
> - Enabled gmac1 device node instead of gmac0.
> - Added a compatible string "syscon" for crg nodes.
>
> arch/arm64/boot/dts/hisilicon/Makefile | 1 +
> .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 171 +++++++++
> arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 415 +++++++++++++++++++++
> 3 files changed, 587 insertions(+)
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
>
> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
> index c3a6c19..8960eca 100644
> --- a/arch/arm64/boot/dts/hisilicon/Makefile
> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
> @@ -1,4 +1,5 @@
> dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
> +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
> dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> new file mode 100644
> index 0000000..967853a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> @@ -0,0 +1,171 @@
> +/*
> + * DTS File for HiSilicon Poplar Development Board
> + *
> + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "hi3798cv200.dtsi"
> +
> +/ {
> + model = "HiSilicon Poplar Development Board";
> + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + user-led0 {
> + label = "USER-LED0";
> + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + user-led1 {
> + label = "USER-LED1";
> + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> +
> + user-led2 {
> + label = "USER-LED2";
> + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "none";
> + default-state = "off";
> + };
> +
> + user-led3 {
> + label = "USER-LED3";
> + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "cpu0";
> + default-state = "off";
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> + label = "LS-UART0";
> +};
> +/* No optional LS-UART1 on Low Speed Expansion Connector. */
> +
> +&i2c0 {
> + status = "okay";
> + label = "LS-I2C0";
> +};
> +
> +&i2c2 {
> + status = "okay";
> + label = "LS-I2C1";
> +};
> +
> +&spi0 {
> + status = "okay";
> + label = "LS-SPI0";
> +};
> +
> +&gpio1 {
> + status = "okay";
> + gpio-line-names = "LS-GPIO-E", "",
> + "", "",
> + "", "LS-GPIO-F",
> + "", "LS-GPIO-J";
> +};
> +
> +&gpio2 {
> + status = "okay";
> + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I",
> + "LS-GPIO-L", "LS-GPIO-G",
> + "LS-GPIO-K", "",
> + "", "";
> +};
> +
> +&gpio3 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "LS-GPIO-C", "",
> + "", "LS-GPIO-B";
> +};
> +
> +&gpio4 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "", "LS-GPIO-D",
> + "", "";
> +};
> +
> +&gpio5 {
> + status = "okay";
> + gpio-line-names = "", "USER-LED-1",
> + "USER-LED-2", "",
> + "", "LS-GPIO-A",
> + "", "";
> +};
> +
> +&gpio6 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "USER-LED-0",
> + "", "",
> + "", "";
> +};
> +
> +&gpio10 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "", "",
> + "USER-LED-3", "";
> +};
> +
> +&gmac1 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy-handle = <ð_phy1>;
> + phy-mode = "rgmii";
> + hisilicon,phy-reset-delays-us = <10000 10000 30000>;
> +
> + eth_phy1: phy@3 {
> + reg = <3>;
> + };
> +};
> +
> +&ir {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> new file mode 100644
> index 0000000..3974dd4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> @@ -0,0 +1,415 @@
> +/*
> + * DTS File for HiSilicon Hi3798cv200 SoC.
> + *
> + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <dt-bindings/clock/histb-clock.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/reset/ti-syscon.h>
> +
> +/ {
> + compatible = "hisilicon,hi3798cv200";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + };
> +
> + cpu@2 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + };
> +
> + cpu@3 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + };
> + };
> +
> + gic: interrupt-controller@...01000 {
> + compatible = "arm,gic-400";
> + reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
> + <0x0 0xf1002000 0x0 0x100>; /* GICC */
> + #address-cells = <0>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + soc: soc@...00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0xf0000000 0x10000000>;
> +
> + crg: clock-reset-controller@...2000 {
> + compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
> + reg = <0x8a22000 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <2>;
> +
> + gmacphyrst: reset-controller {
> + compatible = "ti,syscon-reset";
> + #reset-cells = <1>;
> + ti,reset-bits =
> + <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>, /* 0: gmac0-phy-rst */
> + <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>; /* 1: gmac1-phy-rst */
> + };
> + };
> +
> + sysctrl: system-controller@...0000 {
> + compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
> + reg = <0x8000000 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <2>;
> + };
> +
> + uart0: serial@...0000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x8b00000 0x1000>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sysctrl HISTB_UART0_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + uart2: serial@...2000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x8b02000 0x1000>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HISTB_UART2_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + i2c0: i2c@...0000 {
> + compatible = "hisilicon,hix5hd2-i2c";
> + reg = <0x8b10000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <400000>;
> + clocks = <&crg HISTB_I2C0_CLK>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...1000 {
> + compatible = "hisilicon,hix5hd2-i2c";
> + reg = <0x8b11000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <400000>;
> + clocks = <&crg HISTB_I2C1_CLK>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...2000 {
> + compatible = "hisilicon,hix5hd2-i2c";
> + reg = <0x8b12000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <400000>;
> + clocks = <&crg HISTB_I2C2_CLK>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@...3000 {
> + compatible = "hisilicon,hix5hd2-i2c";
> + reg = <0x8b13000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <400000>;
> + clocks = <&crg HISTB_I2C3_CLK>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...4000 {
> + compatible = "hisilicon,hix5hd2-i2c";
> + reg = <0x8b14000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <400000>;
> + clocks = <&crg HISTB_I2C4_CLK>;
> + status = "disabled";
> + };
> +
> + spi0: spi@...a000 {
> + compatible = "arm,pl022", "arm,primecell";
> + reg = <0x8b1a000 0x1000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + num-cs = <1>;
> + cs-gpios = <&gpio7 1 0>;
> + clocks = <&crg HISTB_SPI0_CLK>;
> + clock-names = "apb_pclk";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + emmc: mmc@...0000 {
> + compatible = "snps,dw-mshc";
> + reg = <0x9830000 0x10000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HISTB_MMC_CIU_CLK>,
> + <&crg HISTB_MMC_BIU_CLK>;
> + clock-names = "ciu", "biu";
> + };
> +
> + gpio0: gpio@...0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b20000 0x1000>;
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio1: gpio@...1000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b21000 0x1000>;
> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio2: gpio@...2000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b22000 0x1000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio3: gpio@...3000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b23000 0x1000>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio4: gpio@...4000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b24000 0x1000>;
> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio5: gpio@...4000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8004000 0x1000>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio6: gpio@...6000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b26000 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio7: gpio@...7000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b27000 0x1000>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio8: gpio@...8000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b28000 0x1000>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio9: gpio@...9000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b29000 0x1000>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio10: gpio@...a000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b2a000 0x1000>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio11: gpio@...b000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b2b000 0x1000>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio12: gpio@...c000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x8b2c000 0x1000>;
> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&crg HISTB_APB_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gmac0: ethernet@...0000 {
> + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
> + reg = <0x9840000 0x1000>,
> + <0x984300c 0x4>;
> + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HISTB_ETH0_MAC_CLK>,
> + <&crg HISTB_ETH0_MACIF_CLK>;
> + clock-names = "mac_core", "mac_ifc";
> + resets = <&crg 0xcc 8>,
> + <&crg 0xcc 10>,
> + <&gmacphyrst 0>;
> + reset-names = "mac_core", "mac_ifc", "phy";
> + status = "disabled";
> + };
> +
> + gmac1: ethernet@...1000 {
> + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
> + reg = <0x9841000 0x1000>,
> + <0x9843010 0x4>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HISTB_ETH1_MAC_CLK>,
> + <&crg HISTB_ETH1_MACIF_CLK>;
> + clock-names = "mac_core", "mac_ifc";
> + resets = <&crg 0xcc 9>,
> + <&crg 0xcc 11>,
> + <&gmacphyrst 1>;
> + reset-names = "mac_core", "mac_ifc", "phy";
> + status = "disabled";
> + };
> +
> + ir: ir@...1000 {
> + compatible = "hisilicon,hix5hd2-ir";
> + reg = <0x8001000 0x1000>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sysctrl HISTB_IR_CLK>;
> + status = "disabled";
> + };
> + };
> +};
Powered by blists - more mailing lists