| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170308152445.12082-3-benjamin.tissoires@redhat.com>
Date: Wed, 8 Mar 2017 16:24:44 +0100
From: Benjamin Tissoires <benjamin.tissoires@...hat.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Andrew Duggan <aduggan@...aptics.com>
Cc: linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: [PATCH v3 2/3] Input: synaptics - allocate a Synaptics Intertouch device
Most of the Synaptics devices are connected through PS/2 and a different
bus (SMBus or HID over I2C).
The secondary bus capability is indicated by the InterTouch bit in
extended capability 0x0C.
When we encounter such a device, we can create a platform device with
the information gathered through the PS/2 enumeration as some information
might be missing through the other bus. Using a platform device allows
to not add any dependency on the psmouse driver.
We only enable the InterTouch device to be created for the laptops
registered with the top software button property or those we know
that are functional.
In the future, we might change the default to always rely on the
InterTouch bus. Currently, users can enable/disable the feature
with the psmouse parameter synaptics_intertouch.
The SMBus devices keep their PS/2 connection alive. If the initialization
process goes too far (psmouse_activate called), the device disconnects
from the I2C bus and stays on the PS/2 bus. We need to be sure the psmouse
driver will stop communicating with the device (and the pass-through
trackstick too). This part is not addressed here but will be in a
following patch.
The HID over I2C devices are enumerated through the ACPI DSDT, and
their PS/2 device also exports the InterTouch bit in the extended
capability 0x0C. However, the firmware keeps its I2C connection open
even after going further in the PS/2 initialization. We don't need
to take extra precautions with those device, especially because they
block their PS/2 communication when HID over I2C is used.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
---
changes in v3:
- Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR reported
by scripts/coccinelle/api/ptr_ret.cocci
changes in v2:
- do not store the platform device as psmouse will be disconnected
to be replaced by a dummy serio driver.
---
drivers/input/mouse/synaptics.c | 103 ++++++++++++++++++++++++++++++++++++++++
drivers/input/mouse/synaptics.h | 1 +
2 files changed, 104 insertions(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 597ee4b..bb3e2f9 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -29,6 +29,8 @@
#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/libps2.h>
+#include <linux/platform_device.h>
+#include <linux/rmi.h>
#include <linux/slab.h>
#include "psmouse.h"
#include "synaptics.h"
@@ -70,6 +72,21 @@
/* maximum ABS_MT_POSITION displacement (in mm) */
#define DMAX 10
+/*
+ * The newest Synaptics device can use a secondary bus (called InterTouch) which
+ * provides a better bandwidth and allow a better control of the touchpads.
+ * This is used to decide if we need to use this bus or not.
+ */
+enum {
+ SYNAPTICS_INTERTOUCH_NOT_SET = -1,
+ SYNAPTICS_INTERTOUCH_OFF,
+ SYNAPTICS_INTERTOUCH_ON,
+};
+
+static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET;
+module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644);
+MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device.");
+
/*****************************************************************************
* Stuff we need even when we do not want native Synaptics support
****************************************************************************/
@@ -218,6 +235,89 @@ static const char * const forcepad_pnp_ids[] = {
NULL
};
+static const char * const smbus_pnp_ids[] = {
+ /* all of the topbuttonpad_pnp_ids are valid, we just add some extras */
+ "LEN0048", /* X1 Carbon 3 */
+ "LEN0046", /* X250 */
+ "LEN004a", /* W541 */
+ "LEN200f", /* T450s */
+};
+
+static int rmi4_id;
+
+static int synaptics_create_intertouch(struct psmouse *psmouse)
+{
+ struct synaptics_data *priv = psmouse->private;
+ struct platform_device_info pdevinfo;
+ struct platform_device *pdev;
+ struct rmi_device_platform_data pdata = {
+ .sensor_pdata = {
+ .sensor_type = rmi_sensor_touchpad,
+ .axis_align.flip_y = true,
+ /* to prevent cursors jumps: */
+ .kernel_tracking = true,
+ },
+ .f30_data = {
+ .buttonpad = SYN_CAP_CLICKPAD(priv->ext_cap_0c),
+ .trackstick_buttons =
+ !!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10),
+ },
+ };
+
+ pdata.sensor_pdata.topbuttonpad =
+ psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
+ !SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10);
+
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ pdevinfo.name = "rmi4";
+ pdevinfo.id = rmi4_id++;
+ pdevinfo.data = &pdata;
+ pdevinfo.size_data = sizeof(pdata);
+ pdevinfo.parent = &psmouse->ps2dev.serio->dev;
+
+ pdev = platform_device_register_full(&pdevinfo);
+ return PTR_ERR_OR_ZERO(pdev);
+}
+
+static int synaptics_remove_intertouch_device(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (strncmp("rmi4", dev_name(dev), 4))
+ return 0;
+
+ platform_device_unregister(pdev);
+
+ return 0;
+}
+
+/**
+ * synaptics_setup_intertouch - called once the PS/2 devices are enumerated
+ * and decides to instantiate a SMBus InterTouch device.
+ */
+static void synaptics_setup_intertouch(struct psmouse *psmouse)
+{
+ int ret;
+
+ /* first remove any remnant platform intertouch devices */
+ bus_for_each_dev(&platform_bus_type, NULL, NULL,
+ synaptics_remove_intertouch_device);
+
+ if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_OFF)
+ return;
+
+ if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) {
+ if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
+ !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids))
+ return;
+ }
+
+ psmouse_info(psmouse, "device also supported by an other bus.\n");
+ ret = synaptics_create_intertouch(psmouse);
+ if (ret)
+ psmouse_info(psmouse,
+ "unable to create intertouch device.\n");
+}
/*****************************************************************************
* Synaptics communications functions
****************************************************************************/
@@ -1546,6 +1646,9 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
}
}
+ if (SYN_CAP_INTERTOUCH(priv->ext_cap_0c))
+ synaptics_setup_intertouch(psmouse);
+
return 0;
init_fail:
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 116ae25..ccbd3c5 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -90,6 +90,7 @@
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
+#define SYN_CAP_INTERTOUCH(ex0c) ((ex0c) & 0x004000)
/*
* The following descibes response for the 0x10 query.
--
2.9.3
Powered by blists - more mailing lists