| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <891f9177-e03c-85e0-ebab-2dc7df2ce9e0@gmail.com>
Date: Fri, 10 Mar 2017 04:37:16 +0100
From: Marek Vasut <marek.vasut@...il.com>
To: Artur Jedrysek <jartur@...ence.com>, linux-mtd@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>
Subject: Re: [v2, 2/4] mtd: spi-nor: Add Octal SPI support to Cadence QSPI
driver.
On 03/08/2017 09:02 AM, Artur Jedrysek wrote:
> Recent versions of Cadence QSPI controller support Octal SPI transfers
> as well. This patch updates existing driver to support such feature.
>
> It is not possible to determine whether or not octal mode is supported
> just by looking at revision register alone. To solve that, an additional
> compatible in Device Tree is added to indicate such capability.
> Both (revision and compatible) are used to determine, which mode to
> pass to spi_nor_scan() call.
>
> Signed-off-by: Artur Jedrysek <jartur@...ence.com>
> ---
> Changelog:
> v2: Use new compatible in DT, instead of boolean property, to indicate
> Octal SPI support.
> Extracted Kconfig update to seperate patch.
> ---
> drivers/mtd/spi-nor/cadence-quadspi.c | 69 +++++++++++++++++++++++++++++++----
> 1 file changed, 61 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index 9f8102d..a96471d 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -76,6 +76,7 @@ struct cqspi_st {
> u32 fifo_depth;
> u32 fifo_width;
> u32 trigger_address;
> + u32 max_mode;
I think it's time to introduce flags instead,
ie. #define CQSPI_FLAG_SUPPORTS_OCTAL BIT(0)
> struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
> };
>
> @@ -87,6 +88,10 @@ struct cqspi_st {
> #define CQSPI_INST_TYPE_SINGLE 0
> #define CQSPI_INST_TYPE_DUAL 1
> #define CQSPI_INST_TYPE_QUAD 2
> +#define CQSPI_INST_TYPE_OCTAL 3
> +
> +#define CQSPI_MAX_MODE_QUAD 0
> +#define CQSPI_MAX_MODE_OCTAL 1
>
> #define CQSPI_DUMMY_CLKS_PER_BYTE 8
> #define CQSPI_DUMMY_BYTES_MAX 4
> @@ -204,6 +209,14 @@ struct cqspi_st {
> #define CQSPI_REG_CMDWRITEDATALOWER 0xA8
> #define CQSPI_REG_CMDWRITEDATAUPPER 0xAC
>
> +#define CQSPI_REG_MODULEID 0xFC
> +#define CQSPI_REG_MODULEID_CONF_ID_MASK 0x3
> +#define CQSPI_REG_MODULEID_CONF_ID_LSB 0
> +#define CQSPI_REG_MODULEID_CONF_ID_OCTAL_PHY 0x0
> +#define CQSPI_REG_MODULEID_CONF_ID_OCTAL 0x1
> +#define CQSPI_REG_MODULEID_CONF_ID_QUAD_PHY 0x2
> +#define CQSPI_REG_MODULEID_CONF_ID_QUAD 0x3
> +
> /* Interrupt status bits */
> #define CQSPI_REG_IRQ_MODE_ERR BIT(0)
> #define CQSPI_REG_IRQ_UNDERFLOW BIT(1)
> @@ -866,6 +879,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read)
> case SPI_NOR_QUAD:
> f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
> break;
> + case SPI_NOR_OCTAL:
> + f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
> + break;
> default:
> return -EINVAL;
> }
> @@ -977,6 +993,17 @@ static int cqspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
> return ret;
> }
>
> +static const u32 cqspi_max_mode_quad = CQSPI_MAX_MODE_QUAD;
> +static const u32 cqspi_max_mode_octal = CQSPI_MAX_MODE_OCTAL;
> +
> +static struct of_device_id const cqspi_dt_ids[] = {
> + { .compatible = "cdns,qspi-nor", .data = &cqspi_max_mode_quad },
> + { .compatible = "cdns,ospi-nor", .data = &cqspi_max_mode_octal },
.data = (void *)CQSPI_FLAG_SUPPORTS_OCTAL , then you don't need that
static const stuff ...
> + { /* end of table */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, cqspi_dt_ids);
> +
> static int cqspi_of_get_flash_pdata(struct platform_device *pdev,
> struct cqspi_flash_pdata *f_pdata,
> struct device_node *np)
> @@ -1018,6 +1045,13 @@ static int cqspi_of_get_pdata(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct cqspi_st *cqspi = platform_get_drvdata(pdev);
> + const struct of_device_id *match;
> +
> + cqspi->max_mode = CQSPI_MAX_MODE_QUAD;
> +
> + match = of_match_node(cqspi_dt_ids, np);
> + if (match && match->data)
> + cqspi->max_mode = *((u32 *)match->data);
Use flags instead, see above.
> cqspi->is_decoded_cs = of_property_read_bool(np, "cdns,is-decoded-cs");
>
> @@ -1074,9 +1108,35 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
> struct cqspi_flash_pdata *f_pdata;
> struct spi_nor *nor;
> struct mtd_info *mtd;
> + enum read_mode mode;
> + enum read_mode dt_mode = SPI_NOR_QUAD;
> unsigned int cs;
> + unsigned int rev_reg;
> int i, ret;
>
> + /* Determine, whether or not octal transfer MAY be supported */
But you already know that from DT, no ?
> + rev_reg = readl(cqspi->iobase + CQSPI_REG_MODULEID);
> + dev_info(dev, "CQSPI Module id %x\n", rev_reg);
> +
> + switch (rev_reg & CQSPI_REG_MODULEID_CONF_ID_MASK) {
> + case CQSPI_REG_MODULEID_CONF_ID_OCTAL_PHY:
> + case CQSPI_REG_MODULEID_CONF_ID_OCTAL:
> + mode = SPI_NOR_OCTAL;
> + break;
> + case CQSPI_REG_MODULEID_CONF_ID_QUAD:
> + case CQSPI_REG_MODULEID_CONF_ID_QUAD_PHY:
Does this work on all revisions of CQSPI ?
> + mode = SPI_NOR_QUAD;
> + break;
> + }
> +
> + if (cqspi->max_mode == CQSPI_MAX_MODE_OCTAL)
> + dt_mode = SPI_NOR_OCTAL;
> +
> + if (mode == SPI_NOR_QUAD && dt_mode == SPI_NOR_OCTAL)
> + dev_warn(dev, "Requested octal mode is not supported by the device.");
> + else if (mode == SPI_NOR_OCTAL && dt_mode == SPI_NOR_QUAD)
> + mode = SPI_NOR_QUAD;
> +
> /* Get flash device data */
> for_each_available_child_of_node(dev->of_node, np) {
> ret = of_property_read_u32(np, "reg", &cs);
> @@ -1123,7 +1183,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
> goto err;
> }
>
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = spi_nor_scan(nor, NULL, mode);
> if (ret)
> goto err;
>
> @@ -1277,13 +1337,6 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
> #define CQSPI_DEV_PM_OPS NULL
> #endif
>
> -static struct of_device_id const cqspi_dt_ids[] = {
> - {.compatible = "cdns,qspi-nor",},
> - { /* end of table */ }
> -};
> -
> -MODULE_DEVICE_TABLE(of, cqspi_dt_ids);
> -
> static struct platform_driver cqspi_platform_driver = {
> .probe = cqspi_probe,
> .remove = cqspi_remove,
>
--
Best regards,
Marek Vasut
Powered by blists - more mailing lists