lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 9 Mar 2017 20:52:42 -0800 From: Steve Longerbeam <slongerbeam@...il.com> To: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com, linux@...linux.org.uk, mchehab@...nel.org, hverkuil@...all.nl, nick@...anahar.org, markus.heiser@...marIT.de, p.zabel@...gutronix.de, laurent.pinchart+renesas@...asonboard.com, bparrot@...com, geert@...ux-m68k.org, arnd@...db.de, sudipm.mukherjee@...il.com, minghsiu.tsai@...iatek.com, tiffany.lin@...iatek.com, jean-christophe.trotin@...com, horms+renesas@...ge.net.au, niklas.soderlund+renesas@...natech.se, robert.jarzmik@...e.fr, songjun.wu@...rochip.com, andrew-ct.chen@...iatek.com, gregkh@...uxfoundation.org, shuah@...nel.org, sakari.ailus@...ux.intel.com, pavel@....cz Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org, devel@...verdev.osuosl.org, Steve Longerbeam <steve_longerbeam@...tor.com> Subject: [PATCH v5 02/39] [media] dt-bindings: Add bindings for i.MX media driver Add bindings documentation for the i.MX media driver. Signed-off-by: Steve Longerbeam <steve_longerbeam@...tor.com> --- Documentation/devicetree/bindings/media/imx.txt | 74 +++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/imx.txt diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt new file mode 100644 index 0000000..3059c06 --- /dev/null +++ b/Documentation/devicetree/bindings/media/imx.txt @@ -0,0 +1,74 @@ +Freescale i.MX Media Video Device +================================= + +Video Media Controller node +--------------------------- + +This is the media controller node for video capture support. It is a +virtual device that lists the camera serial interface nodes that the +media device will control. + +Required properties: +- compatible : "fsl,imx-capture-subsystem"; +- ports : Should contain a list of phandles pointing to camera + sensor interface ports of IPU devices + +example: + +capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>; +}; + +fim child node +-------------- + +This is an optional child node of the ipu_csi port nodes. If present and +available, it enables the Frame Interval Monitor. Its properties can be +used to modify the method in which the FIM measures frame intervals. +Refer to Documentation/media/v4l-drivers/imx.rst for more info on the +Frame Interval Monitor. + +Optional properties: +- fsl,input-capture-channel: an input capture channel and channel flags, + specified as <chan flags>. The channel number + must be 0 or 1. The flags can be + IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, or + IRQ_TYPE_EDGE_BOTH, and specify which input + capture signal edge will trigger the input + capture event. If an input capture channel is + specified, the FIM will use this method to + measure frame intervals instead of via the EOF + interrupt. The input capture method is much + preferred over EOF as it is not subject to + interrupt latency errors. However it requires + routing the VSYNC or FIELD output signals of + the camera sensor to one of the i.MX input + capture pads (SD1_DAT0, SD1_DAT1), which also + gives up support for SD1. + + +mipi_csi2 node +-------------- + +This is the device node for the MIPI CSI-2 Receiver, required for MIPI +CSI-2 sensors. + +Required properties: +- compatible : "fsl,imx6-mipi-csi2", "snps,dw-mipi-csi2"; +- reg : physical base address and length of the register set; +- clocks : the MIPI CSI-2 receiver requires three clocks: hsi_tx + (the D-PHY clock), video_27m (D-PHY PLL reference + clock), and eim_podf; +- clock-names : must contain "dphy", "ref", "pix"; +- port@* : five port nodes must exist, containing endpoints + connecting to the source and sink devices according to + of_graph bindings. The first port is an input port, + connecting with a MIPI CSI-2 source, and ports 1 + through 4 are output ports connecting with parallel + bus sink endpoint nodes and correspond to the four + MIPI CSI-2 virtual channel outputs. + +Optional properties: +- interrupts : must contain two level-triggered interrupts, + in order: 100 and 101; -- 2.7.4
Powered by blists - more mailing lists