| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFrS+Je9eZ=wedh72XgPr0WpFdg8=5rnhbjeMGAsSpRGvw@mail.gmail.com>
Date: Mon, 13 Mar 2017 09:21:02 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Dave Gerlach <d-gerlach@...com>
Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Kevin Hilman <khilman@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Nishanth Menon <nm@...com>, Keerthy <j-keerthy@...com>,
Russell King <rmk+kernel@...linux.org.uk>,
Tero Kristo <t-kristo@...com>,
Sudeep Holla <sudeep.holla@....com>
Subject: Re: [PATCH v4 3/5] dt-bindings: Add TI SCI PM Domains
On 7 March 2017 at 11:22, Dave Gerlach <d-gerlach@...com> wrote:
> Add a generic power domain implementation, TI SCI PM Domains, that
> will hook into the genpd framework and allow the TI SCI protocol to
> control device power states.
>
> Also, provide macros representing each device index as understood
> by TI SCI to be used in the device node power-domain references.
> These are identifiers for the K2G devices managed by the PMMC.
>
> Signed-off-by: Nishanth Menon <nm@...com>
> Signed-off-by: Dave Gerlach <d-gerlach@...com>
Reviewed-by: Ulf Hansson <ulf.hansson@...aro.org>
> ---
> .../devicetree/bindings/soc/ti/sci-pm-domain.txt | 59 ++++++++++++++
> MAINTAINERS | 2 +
> include/dt-bindings/genpd/k2g.h | 90 ++++++++++++++++++++++
> 3 files changed, 151 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> create mode 100644 include/dt-bindings/genpd/k2g.h
>
> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> new file mode 100644
> index 000000000000..86a6a3d52ed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> @@ -0,0 +1,59 @@
> +Texas Instruments TI-SCI Generic Power Domain
> +---------------------------------------------
> +
> +Some TI SoCs contain a system controller (like the PMMC, etc...) that is
> +responsible for controlling the state of the IPs that are present.
> +Communication between the host processor running an OS and the system
> +controller happens through a protocol known as TI-SCI [1]. This pm domain
> +implementation plugs into the generic pm domain framework and makes use of
> +the TI SCI protocol power on and off each device when needed.
> +
> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
> +
> +PM Domain Node
> +==============
> +The PM domain node represents the global PM domain managed by the PMMC, which
> +in this case is the implementation as documented by the generic PM domain
> +bindings in Documentation/devicetree/bindings/power/power_domain.txt. Because
> +this relies on the TI SCI protocol to communicate with the PMMC it must be a
> +child of the pmmc node.
> +
> +Required Properties:
> +--------------------
> +- compatible: should be "ti,sci-pm-domain"
> +- #power-domain-cells: Must be 1 so that an id can be provided in each
> + device node.
> +
> +Example (K2G):
> +-------------
> + pmmc: pmmc {
> + compatible = "ti,k2g-sci";
> + ...
> +
> + k2g_pds: power-controller {
> + compatible = "ti,sci-pm-domain";
> + #power-domain-cells = <1>;
> + };
> + };
> +
> +PM Domain Consumers
> +===================
> +Hardware blocks belonging to a PM domain should contain a "power-domains"
> +property that is a phandle pointing to the corresponding PM domain node
> +along with an index representing the device id to be passed to the PMMC
> +for device control.
> +
> +Required Properties:
> +--------------------
> +- power-domains: phandle pointing to the corresponding PM domain node
> + and an ID representing the device.
> +
> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
> +
> +Example (K2G):
> +--------------------
> + uart0: serial@...30c00 {
> + compatible = "ns16550a";
> + ...
> + power-domains = <&k2g_pds K2G_DEV_UART0>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c265a5fe4848..aaf96a9b4cd4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12383,6 +12383,8 @@ S: Maintained
> F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
> F: drivers/firmware/ti_sci*
> F: include/linux/soc/ti/ti_sci_protocol.h
> +F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> +F: include/dt-bindings/genpd/k2g.h
>
> THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
> M: Hans Verkuil <hverkuil@...all.nl>
> diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
> new file mode 100644
> index 000000000000..1f31f17e19eb
> --- /dev/null
> +++ b/include/dt-bindings/genpd/k2g.h
> @@ -0,0 +1,90 @@
> +/*
> + * TI K2G SoC Device definitions
> + *
> + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _DT_BINDINGS_GENPD_K2G_H
> +#define _DT_BINDINGS_GENPD_K2G_H
> +
> +/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
> +
> +#define K2G_DEV_PMMC0 0x0000
> +#define K2G_DEV_MLB0 0x0001
> +#define K2G_DEV_DSS0 0x0002
> +#define K2G_DEV_MCBSP0 0x0003
> +#define K2G_DEV_MCASP0 0x0004
> +#define K2G_DEV_MCASP1 0x0005
> +#define K2G_DEV_MCASP2 0x0006
> +#define K2G_DEV_DCAN0 0x0008
> +#define K2G_DEV_DCAN1 0x0009
> +#define K2G_DEV_EMIF0 0x000a
> +#define K2G_DEV_MMCHS0 0x000b
> +#define K2G_DEV_MMCHS1 0x000c
> +#define K2G_DEV_GPMC0 0x000d
> +#define K2G_DEV_ELM0 0x000e
> +#define K2G_DEV_SPI0 0x0010
> +#define K2G_DEV_SPI1 0x0011
> +#define K2G_DEV_SPI2 0x0012
> +#define K2G_DEV_SPI3 0x0013
> +#define K2G_DEV_ICSS0 0x0014
> +#define K2G_DEV_ICSS1 0x0015
> +#define K2G_DEV_USB0 0x0016
> +#define K2G_DEV_USB1 0x0017
> +#define K2G_DEV_NSS0 0x0018
> +#define K2G_DEV_PCIE0 0x0019
> +#define K2G_DEV_GPIO0 0x001b
> +#define K2G_DEV_GPIO1 0x001c
> +#define K2G_DEV_TIMER64_0 0x001d
> +#define K2G_DEV_TIMER64_1 0x001e
> +#define K2G_DEV_TIMER64_2 0x001f
> +#define K2G_DEV_TIMER64_3 0x0020
> +#define K2G_DEV_TIMER64_4 0x0021
> +#define K2G_DEV_TIMER64_5 0x0022
> +#define K2G_DEV_TIMER64_6 0x0023
> +#define K2G_DEV_MSGMGR0 0x0025
> +#define K2G_DEV_BOOTCFG0 0x0026
> +#define K2G_DEV_ARM_BOOTROM0 0x0027
> +#define K2G_DEV_DSP_BOOTROM0 0x0029
> +#define K2G_DEV_DEBUGSS0 0x002b
> +#define K2G_DEV_UART0 0x002c
> +#define K2G_DEV_UART1 0x002d
> +#define K2G_DEV_UART2 0x002e
> +#define K2G_DEV_EHRPWM0 0x002f
> +#define K2G_DEV_EHRPWM1 0x0030
> +#define K2G_DEV_EHRPWM2 0x0031
> +#define K2G_DEV_EHRPWM3 0x0032
> +#define K2G_DEV_EHRPWM4 0x0033
> +#define K2G_DEV_EHRPWM5 0x0034
> +#define K2G_DEV_EQEP0 0x0035
> +#define K2G_DEV_EQEP1 0x0036
> +#define K2G_DEV_EQEP2 0x0037
> +#define K2G_DEV_ECAP0 0x0038
> +#define K2G_DEV_ECAP1 0x0039
> +#define K2G_DEV_I2C0 0x003a
> +#define K2G_DEV_I2C1 0x003b
> +#define K2G_DEV_I2C2 0x003c
> +#define K2G_DEV_EDMA0 0x003f
> +#define K2G_DEV_SEMAPHORE0 0x0040
> +#define K2G_DEV_INTC0 0x0041
> +#define K2G_DEV_GIC0 0x0042
> +#define K2G_DEV_QSPI0 0x0043
> +#define K2G_DEV_ARM_64B_COUNTER0 0x0044
> +#define K2G_DEV_TETRIS0 0x0045
> +#define K2G_DEV_CGEM0 0x0046
> +#define K2G_DEV_MSMC0 0x0047
> +#define K2G_DEV_CBASS0 0x0049
> +#define K2G_DEV_BOARD0 0x004c
> +#define K2G_DEV_EDMA1 0x004f
> +
> +#endif
> --
> 2.11.0
>
Powered by blists - more mailing lists