[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bc9a2d9b-1f16-4b59-0033-235686c76dcb@cogentembedded.com>
Date: Sat, 18 Mar 2017 16:52:18 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Tejun Heo <tj@...nel.org>
Cc: Sekhar Nori <nsekhar@...com>, Kevin Hilman <khilman@...libre.com>,
Arnd Bergmann <arnd@...db.de>,
Russell King <linux@....linux.org.uk>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
linux-ide@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/3] ata: add Palmchip BK3710 PATA controller driver
Hello!
On 3/14/2017 7:36 PM, Bartlomiej Zolnierkiewicz wrote:
> Add Palmchip BK3710 PATA controller driver.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
[...]
> diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
> new file mode 100644
> index 0000000..6d77217
> --- /dev/null
> +++ b/drivers/ata/pata_bk3710.c
> @@ -0,0 +1,386 @@
[...]
> +static void pata_bk3710_chipinit(void __iomem *base)
> +{
[...]
> + /*
> + * IORDYTMP IORDY Timer for Primary Register
> + * (ATA_IORDYTMP_IORDYTMP , 0xffff )
> + */
> + iowrite32(0xFFFF, base + BK3710_IORDYTMP);
As I've already said, this is useless as we don't handle the IORDY timeout
interrupt anyway; writing 0 would be fine.
> +
> + /*
> + * Configure BMISP Register
> + * (ATA_BMISP_DMAEN1 , DISABLE ) |
> + * (ATA_BMISP_DMAEN0 , DISABLE ) |
> + * (ATA_BMISP_IORDYINT , CLEAR) |
> + * (ATA_BMISP_INTRSTAT , CLEAR) |
> + * (ATA_BMISP_DMAERROR , CLEAR)
> + */
> + iowrite16(0, base + BK3710_BMISP);
Bits 0-3 cane only be cleared by writing 1, so this write can't clear
them, contrary to what the comment says. Might be a material for a follow-up
patch tho...
[...]
> +static int __init pata_bk3710_probe(struct platform_device *pdev)
> +{
> + struct clk *clk;
> + struct resource *mem;
> + struct ata_host *host;
> + struct ata_port *ap;
> + void __iomem *base;
> + unsigned long rate;
> + int irq;
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(clk))
> + return -ENODEV;
> +
> + clk_enable(clk);
> + rate = clk_get_rate(clk);
> + if (!rate)
> + return -EINVAL;
> +
> + /* NOTE: round *down* to meet minimum timings; we count in clocks */
> + ideclk_period = 1000000000UL / rate;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (mem == NULL) {
> + pr_err(DRV_NAME ": failed to get memory region resource\n");
> + return -ENODEV;
> + }
NULL check not needed here, devm_ioremap_resource() checks this anyway.
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + pr_err(DRV_NAME ": failed to get IRQ resource\n");
> + return irq;
> + }
> +
> + base = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
[...]
> +/* work with hotplug and coldplug */
> +MODULE_ALIAS("platform:palm_bk3710");
> +
> +static struct platform_driver pata_bk3710_driver = {
> + .driver = {
> + .name = "palm_bk3710",
Not DRV_NAME?
[...]
MBR, Sergei
Powered by blists - more mailing lists