| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Mar 2017 19:55:58 +0100
From: Peter Huewe <peterhuewe@....de>
To: Guenter Roeck <linux@...ck-us.net>
CC: Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/5] w83627ehf: Use hwmon_device_register_with_info and sensor groups
Am 23. März 2017 19:43:39 MEZ schrieb Guenter Roeck <linux@...ck-us.net>:
>On Thu, Mar 23, 2017 at 02:03:04PM +0100, Peter Huewe wrote:
>> This patch replaces the old, deprecated call to hwmon_device_register
>> with the new hwmon_device_register_with_info and converts the whole
>> driver to the new hwmon interface using the hwmon_chip_info methods
>> and the attribute_group method.
>>
>> All standard attributes were converted to the corresponding
>> hwmon_chip_info methods.
>> For some functions a hwmon channel to device channel conversion had
>to
>> be performed, e.g. hwmon_in_alarm has the info for alert_5 in channel
>8.
>>
>> All non-standard attributes are converted to the attribute_group
>method,
>> by
>> - adding them statically to the attribute_group if they are available
>> for all variants of devices supported by this driver
>> - adding them at probe time to the attribute_group if the
>availability
>> is depending on the actual chip type.
>> The appropriate count of entries was reserved.
>>
>> As a pre-condition a reference to the sio_data structure was moved
>into
>> w83627ehf_data for easier retrieval of the information, since this is
>> much easier than trying to access the platform_data.
>>
>> The driver is now much more "checkpatch clean" than it used to be,
>but
>> still not completely.
>> The conversion saves about 20k in the resulting .ko
>>
>> Tested with a NCT6776F chip.
>>
>> v2:
>> - converted to proper is_visible methods
>> - applied minor feedback of v1
>>
>Nicely done.
>
>Couple of nitpicks:
>- Please no double empty lines (removed some, added some ;-)
Okay, interestingly checkpatch did not complain.
>- still a couple of c99 comments
I thought I had them removed, or atleast not introduced new ones
>- (later or intro patch): dem_request_region() in probe could help
> with cleanup, you could use the devm_ function for hwmon registration,
> and drop the remove function entirely.
Yea makes sense, already thought about it, but then decided against it for the first comversion.
>- if () return; else return; causes static analyzer hiccup.
Okay, which analyzer has trouble with that?
I ran Wolfram's ninja-check against it (sparse, smatch, coccinelle etc...) and didn't see any issues.
> Please use if () return; return; (no else)
> You do that already most of the time but not always.
Shall I respin one more time?
Or fixup in seperate patches?
>
>Thanks,
>Guenter
>
>> Signed-off-by: Peter Huewe <peterhuewe@....de>
>> ---
>> drivers/hwmon/w83627ehf.c | 1536
>+++++++++++++++++++++++----------------------
>> 1 file changed, 778 insertions(+), 758 deletions(-)
>>
>> diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
>> index ad68b6d9ff17..f2f33dd35fd4 100644
>> --- a/drivers/hwmon/w83627ehf.c
>> +++ b/drivers/hwmon/w83627ehf.c
>> @@ -1,6 +1,7 @@
>> /*
>> * w83627ehf - Driver for the hardware monitoring functionality of
>> * the Winbond W83627EHF Super-I/O chip
>> + * Copyright (C) 2017 Peter Huewe <peterhuewe@....de>
>> * Copyright (C) 2005-2012 Jean Delvare <jdelvare@...e.de>
>> * Copyright (C) 2006 Yuan Mu (Winbond),
>> * Rudolf Marek <r.marek@...embler.cz>
>> @@ -426,6 +427,11 @@ static inline u8 in_to_reg(u32 val, u8 nr, const
>u16 *scale_in)
>> /*
>> * Data structures and manipulation thereof
>> */
>> +struct w83627ehf_sio_data {
>> + int sioreg;
>> + enum kinds kind;
>> +};
>> +
>>
>> struct w83627ehf_data {
>> int addr; /* IO base of hw monitor block */
>> @@ -514,11 +520,7 @@ struct w83627ehf_data {
>> u8 fandiv1;
>> u8 fandiv2;
>> #endif
>> -};
>> -
>> -struct w83627ehf_sio_data {
>> - int sioreg;
>> - enum kinds kind;
>> + struct w83627ehf_sio_data *sio_data;
>> };
>>
>> /*
>> @@ -679,7 +681,7 @@ static void w83627ehf_write_fan_div(struct
>w83627ehf_data *data, int nr)
>> static void w83627ehf_write_fan_div_common(struct device *dev,
>> struct w83627ehf_data *data, int nr)
>> {
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>>
>> if (sio_data->kind == nct6776)
>> ; /* no dividers, do nothing */
>> @@ -730,11 +732,9 @@ static void w83627ehf_update_fan_div(struct
>w83627ehf_data *data)
>> static void w83627ehf_update_fan_div_common(struct device *dev,
>> struct w83627ehf_data *data)
>> {
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>
> struct w83627ehf_sio_data *sio_data = data->sio_data;
>
>Though I agree it doesn't really matter, since this code is going to be
>removed anyway, so feel free to ignore that one. Just had to make the
>point :-)
>
>> -
>> - if (sio_data->kind == nct6776)
>> + if (data->sio_data->kind == nct6776)
>> ; /* no dividers, do nothing */
>> - else if (sio_data->kind == nct6775)
>> + else if (data->sio_data->kind == nct6775)
>> nct6775_update_fan_div(data);
>> else
>> w83627ehf_update_fan_div(data);
>> @@ -787,7 +787,7 @@ static void w83627ehf_update_pwm(struct
>w83627ehf_data *data)
>> static void w83627ehf_update_pwm_common(struct device *dev,
>> struct w83627ehf_data *data)
>> {
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>>
>> if (sio_data->kind == nct6775 || sio_data->kind == nct6776)
>> nct6775_update_pwm(data);
>> @@ -798,8 +798,7 @@ static void w83627ehf_update_pwm_common(struct
>device *dev,
>> static struct w83627ehf_data *w83627ehf_update_device(struct device
>*dev)
>> {
>> struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> -
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>> int i;
>>
>> mutex_lock(&data->update_lock);
>> @@ -936,157 +935,15 @@ static struct w83627ehf_data
>*w83627ehf_update_device(struct device *dev)
>> return data;
>> }
>>
>> -/*
>> - * Sysfs callback functions
>> - */
>> -#define show_in_reg(reg) \
>> -static ssize_t \
>> -show_##reg(struct device *dev, struct device_attribute *attr, \
>> - char *buf) \
>> -{ \
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev); \
>> - struct sensor_device_attribute *sensor_attr = \
>> - to_sensor_dev_attr(attr); \
>> - int nr = sensor_attr->index; \
>> - return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
>> - data->scale_in)); \
>> -}
>> -show_in_reg(in)
>> -show_in_reg(in_min)
>> -show_in_reg(in_max)
>> -
>> -#define store_in_reg(REG, reg) \
>> -static ssize_t \
>> -store_in_##reg(struct device *dev, struct device_attribute *attr, \
>> - const char *buf, size_t count) \
>> -{ \
>> - struct w83627ehf_data *data = dev_get_drvdata(dev); \
>> - struct sensor_device_attribute *sensor_attr = \
>> - to_sensor_dev_attr(attr); \
>> - int nr = sensor_attr->index; \
>> - unsigned long val; \
>> - int err; \
>> - err = kstrtoul(buf, 10, &val); \
>> - if (err < 0) \
>> - return err; \
>> - mutex_lock(&data->update_lock); \
>> - data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
>> - w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
>> - data->in_##reg[nr]); \
>> - mutex_unlock(&data->update_lock); \
>> - return count; \
>> -}
>> -
>> -store_in_reg(MIN, min)
>> -store_in_reg(MAX, max)
>> -
>> -static ssize_t show_alarm(struct device *dev, struct
>device_attribute *attr,
>> - char *buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%u\n", (data->alarms >> nr) & 0x01);
>> -}
>> -
>> -static struct sensor_device_attribute sda_in_input[] = {
>> - SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
>> - SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
>> - SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
>> - SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
>> - SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
>> - SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
>> - SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
>> - SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
>> - SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
>> - SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9),
>> -};
>> -
>> -static struct sensor_device_attribute sda_in_alarm[] = {
>> - SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0),
>> - SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1),
>> - SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2),
>> - SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3),
>> - SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8),
>> - SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 21),
>> - SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 20),
>> - SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16),
>> - SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17),
>> - SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 19),
>> -};
>> -
>> -static struct sensor_device_attribute sda_in_min[] = {
>> - SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>0),
>> - SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>1),
>> - SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>2),
>> - SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>3),
>> - SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>4),
>> - SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>5),
>> - SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>6),
>> - SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>7),
>> - SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>8),
>> - SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min,
>9),
>> -};
>> -
>> -static struct sensor_device_attribute sda_in_max[] = {
>> - SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>0),
>> - SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>1),
>> - SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>2),
>> - SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>3),
>> - SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>4),
>> - SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>5),
>> - SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>6),
>> - SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>7),
>> - SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>8),
>> - SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max,
>9),
>> -};
>> -
>> -static ssize_t
>> -show_fan(struct device *dev, struct device_attribute *attr, char
>*buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%d\n", data->rpm[nr]);
>> -}
>> -
>> -static ssize_t
>> -show_fan_min(struct device *dev, struct device_attribute *attr, char
>*buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%d\n",
>> - data->fan_from_reg_min(data->fan_min[nr],
>> - data->fan_div[nr]));
>> -}
>> -
>> -static ssize_t
>> -show_fan_div(struct device *dev, struct device_attribute *attr,
>> - char *buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
>> -}
>>
>> -static ssize_t
>> -store_fan_min(struct device *dev, struct device_attribute *attr,
>> - const char *buf, size_t count)
>> +static void
>> +store_fan_min(struct device *dev, u32 channel, unsigned long val)
>> {
>> struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - unsigned long val;
>> - int err;
>> + int nr = channel;
>> unsigned int reg;
>> u8 new_div;
>>
>> - err = kstrtoul(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> mutex_lock(&data->update_lock);
>> if (!data->has_fan_div) {
>> /*
>> @@ -1161,336 +1018,8 @@ store_fan_min(struct device *dev, struct
>device_attribute *attr,
>> data->fan_min[nr]);
>> mutex_unlock(&data->update_lock);
>>
>> - return count;
>> -}
>> -
>> -static struct sensor_device_attribute sda_fan_input[] = {
>> - SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
>> - SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
>> - SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
>> - SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
>> - SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
>> -};
>> -
>> -static struct sensor_device_attribute sda_fan_alarm[] = {
>> - SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6),
>> - SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7),
>> - SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11),
>> - SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 10),
>> - SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 23),
>> -};
>> -
>> -static struct sensor_device_attribute sda_fan_min[] = {
>> - SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
>> - store_fan_min, 0),
>> - SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
>> - store_fan_min, 1),
>> - SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
>> - store_fan_min, 2),
>> - SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
>> - store_fan_min, 3),
>> - SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
>> - store_fan_min, 4),
>> -};
>> -
>> -static struct sensor_device_attribute sda_fan_div[] = {
>> - SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
>> - SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
>> - SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
>> - SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3),
>> - SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
>> -};
>> -
>> -static ssize_t
>> -show_temp_label(struct device *dev, struct device_attribute *attr,
>char *buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
>> -}
>> -
>> -#define show_temp_reg(addr, reg) \
>> -static ssize_t \
>> -show_##reg(struct device *dev, struct device_attribute *attr, \
>> - char *buf) \
>> -{ \
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev); \
>> - struct sensor_device_attribute *sensor_attr = \
>> - to_sensor_dev_attr(attr); \
>> - int nr = sensor_attr->index; \
>> - return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->reg[nr])); \
>> -}
>> -show_temp_reg(reg_temp, temp);
>> -show_temp_reg(reg_temp_over, temp_max);
>> -show_temp_reg(reg_temp_hyst, temp_max_hyst);
>> -
>> -#define store_temp_reg(addr, reg) \
>> -static ssize_t \
>> -store_##reg(struct device *dev, struct device_attribute *attr, \
>> - const char *buf, size_t count) \
>> -{ \
>> - struct w83627ehf_data *data = dev_get_drvdata(dev); \
>> - struct sensor_device_attribute *sensor_attr = \
>> - to_sensor_dev_attr(attr); \
>> - int nr = sensor_attr->index; \
>> - int err; \
>> - long val; \
>> - err = kstrtol(buf, 10, &val); \
>> - if (err < 0) \
>> - return err; \
>> - mutex_lock(&data->update_lock); \
>> - data->reg[nr] = LM75_TEMP_TO_REG(val); \
>> - w83627ehf_write_temp(data, data->addr[nr], data->reg[nr]); \
>> - mutex_unlock(&data->update_lock); \
>> - return count; \
>> -}
>> -store_temp_reg(reg_temp_over, temp_max);
>> -store_temp_reg(reg_temp_hyst, temp_max_hyst);
>> -
>> -static ssize_t
>> -show_temp_offset(struct device *dev, struct device_attribute *attr,
>char *buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> -
>> - return sprintf(buf, "%d\n",
>> - data->temp_offset[sensor_attr->index] * 1000);
>> -}
>> -
>> -static ssize_t
>> -store_temp_offset(struct device *dev, struct device_attribute *attr,
>> - const char *buf, size_t count)
>> -{
>> - struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - long val;
>> - int err;
>> -
>> - err = kstrtol(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> - val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
>> -
>> - mutex_lock(&data->update_lock);
>> - data->temp_offset[nr] = val;
>> - w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[nr], val);
>> - mutex_unlock(&data->update_lock);
>> - return count;
>> -}
>> -
>> -static ssize_t
>> -show_temp_type(struct device *dev, struct device_attribute *attr,
>char *buf)
>> -{
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
>> -}
>> -
>> -static struct sensor_device_attribute sda_temp_input[] = {
>> - SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
>> - SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
>> - SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
>> - SENSOR_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3),
>> - SENSOR_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4),
>> - SENSOR_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5),
>> - SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6),
>> - SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7),
>> - SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_label[] = {
>> - SENSOR_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0),
>> - SENSOR_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1),
>> - SENSOR_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2),
>> - SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3),
>> - SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4),
>> - SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5),
>> - SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6),
>> - SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7),
>> - SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_max[] = {
>> - SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 0),
>> - SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 1),
>> - SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 2),
>> - SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 3),
>> - SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 4),
>> - SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 5),
>> - SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 6),
>> - SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 7),
>> - SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max,
>> - store_temp_max, 8),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_max_hyst[] = {
>> - SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 0),
>> - SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 1),
>> - SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 2),
>> - SENSOR_ATTR(temp4_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 3),
>> - SENSOR_ATTR(temp5_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 4),
>> - SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 5),
>> - SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 6),
>> - SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 7),
>> - SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
>> - store_temp_max_hyst, 8),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_alarm[] = {
>> - SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4),
>> - SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5),
>> - SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_type[] = {
>> - SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
>> - SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
>> - SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
>> -};
>> -
>> -static struct sensor_device_attribute sda_temp_offset[] = {
>> - SENSOR_ATTR(temp1_offset, S_IRUGO | S_IWUSR, show_temp_offset,
>> - store_temp_offset, 0),
>> - SENSOR_ATTR(temp2_offset, S_IRUGO | S_IWUSR, show_temp_offset,
>> - store_temp_offset, 1),
>> - SENSOR_ATTR(temp3_offset, S_IRUGO | S_IWUSR, show_temp_offset,
>> - store_temp_offset, 2),
>> -};
>> -
>> -#define show_pwm_reg(reg) \
>> -static ssize_t show_##reg(struct device *dev, struct
>device_attribute *attr, \
>> - char *buf) \
>> -{ \
>> - struct w83627ehf_data *data = w83627ehf_update_device(dev); \
>> - struct sensor_device_attribute *sensor_attr = \
>> - to_sensor_dev_attr(attr); \
>> - int nr = sensor_attr->index; \
>> - return sprintf(buf, "%d\n", data->reg[nr]); \
>> -}
>> -
>> -show_pwm_reg(pwm_mode)
>> -show_pwm_reg(pwm_enable)
>> -show_pwm_reg(pwm)
>> -
>> -static ssize_t
>> -store_pwm_mode(struct device *dev, struct device_attribute *attr,
>> - const char *buf, size_t count)
>> -{
>> - struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> - int nr = sensor_attr->index;
>> - unsigned long val;
>> - int err;
>> - u16 reg;
>> -
>> - err = kstrtoul(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> - if (val > 1)
>> - return -EINVAL;
>> -
>> - /* On NCT67766F, DC mode is only supported for pwm1 */
>> - if (sio_data->kind == nct6776 && nr && val != 1)
>> - return -EINVAL;
>> -
>> - mutex_lock(&data->update_lock);
>> - reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
>> - data->pwm_mode[nr] = val;
>> - reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]);
>> - if (!val)
>> - reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr];
>> - w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
>> - mutex_unlock(&data->update_lock);
>> - return count;
>> -}
>> -
>> -static ssize_t
>> -store_pwm(struct device *dev, struct device_attribute *attr,
>> - const char *buf, size_t count)
>> -{
>> - struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - unsigned long val;
>> - int err;
>> -
>> - err = kstrtoul(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> - val = clamp_val(val, 0, 255);
>> -
>> - mutex_lock(&data->update_lock);
>> - data->pwm[nr] = val;
>> - w83627ehf_write_value(data, data->REG_PWM[nr], val);
>> - mutex_unlock(&data->update_lock);
>> - return count;
>> -}
>> -
>> -static ssize_t
>> -store_pwm_enable(struct device *dev, struct device_attribute *attr,
>> - const char *buf, size_t count)
>> -{
>> - struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> - struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> - int nr = sensor_attr->index;
>> - unsigned long val;
>> - int err;
>> - u16 reg;
>> -
>> - err = kstrtoul(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> - if (!val || (val > 4 && val != data->pwm_enable_orig[nr]))
>> - return -EINVAL;
>> - /* SmartFan III mode is not supported on NCT6776F */
>> - if (sio_data->kind == nct6776 && val == 4)
>> - return -EINVAL;
>> -
>> - mutex_lock(&data->update_lock);
>> - data->pwm_enable[nr] = val;
>> - if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
>> - reg = w83627ehf_read_value(data,
>> - NCT6775_REG_FAN_MODE[nr]);
>> - reg &= 0x0f;
>> - reg |= (val - 1) << 4;
>> - w83627ehf_write_value(data,
>> - NCT6775_REG_FAN_MODE[nr], reg);
>> - } else {
>> - reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
>> - reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
>> - reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
>> - w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
>> - }
>> - mutex_unlock(&data->update_lock);
>> - return count;
>> }
>>
>> -
>> #define show_tol_temp(reg) \
>> static ssize_t show_##reg(struct device *dev, struct
>device_attribute *attr, \
>> char *buf) \
>> @@ -1533,7 +1062,7 @@ store_tolerance(struct device *dev, struct
>device_attribute *attr,
>> const char *buf, size_t count)
>> {
>> struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>> struct sensor_device_attribute *sensor_attr =
>to_sensor_dev_attr(attr);
>> int nr = sensor_attr->index;
>> u16 reg;
>> @@ -1568,35 +1097,6 @@ store_tolerance(struct device *dev, struct
>device_attribute *attr,
>> return count;
>> }
>>
>> -static struct sensor_device_attribute sda_pwm[] = {
>> - SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0),
>> - SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
>> - SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2),
>> - SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3),
>> -};
>> -
>> -static struct sensor_device_attribute sda_pwm_mode[] = {
>> - SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
>> - store_pwm_mode, 0),
>> - SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
>> - store_pwm_mode, 1),
>> - SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
>> - store_pwm_mode, 2),
>> - SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
>> - store_pwm_mode, 3),
>> -};
>> -
>> -static struct sensor_device_attribute sda_pwm_enable[] = {
>> - SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
>> - store_pwm_enable, 0),
>> - SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
>> - store_pwm_enable, 1),
>> - SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
>> - store_pwm_enable, 2),
>> - SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
>> - store_pwm_enable, 3),
>> -};
>> -
>> static struct sensor_device_attribute sda_target_temp[] = {
>> SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp,
>> store_target_temp, 0),
>> @@ -1693,15 +1193,6 @@ store_##reg(struct device *dev, struct
>device_attribute *attr, \
>>
>> fan_time_functions(fan_stop_time, FAN_STOP_TIME)
>>
>> -static ssize_t name_show(struct device *dev, struct device_attribute
>*attr,
>> - char *buf)
>> -{
>> - struct w83627ehf_data *data = dev_get_drvdata(dev);
>> -
>> - return sprintf(buf, "%s\n", data->name);
>> -}
>> -static DEVICE_ATTR_RO(name);
>> -
>> static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
>> SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
>> store_fan_stop_time, 3),
>> @@ -1724,21 +1215,18 @@ static struct sensor_device_attribute
>sda_sf3_arrays_fan3[] = {
>> store_fan_stop_output, 2),
>> };
>>
>> -static struct sensor_device_attribute sda_sf3_arrays[] = {
>> - SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
>> - store_fan_stop_time, 0),
>> - SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
>> - store_fan_stop_time, 1),
>> - SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO,
>show_fan_start_output,
>> - store_fan_start_output, 0),
>> - SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO,
>show_fan_start_output,
>> - store_fan_start_output, 1),
>> - SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO,
>show_fan_stop_output,
>> - store_fan_stop_output, 0),
>> - SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO,
>show_fan_stop_output,
>> - store_fan_stop_output, 1),
>> -};
>> -
>> +static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time,
>> + store_fan_stop_time, 0);
>> +static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time,
>> + store_fan_stop_time, 1);
>> +static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644,
>show_fan_start_output,
>> + store_fan_start_output, 0);
>> +static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644,
>show_fan_start_output,
>> + store_fan_start_output, 1);
>> +static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644,
>show_fan_stop_output,
>> + store_fan_stop_output, 0);
>> +static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644,
>show_fan_stop_output,
>> + store_fan_stop_output, 1);
>>
>> /*
>> * pwm1 and pwm3 don't support max and step settings on all chips.
>> @@ -1767,7 +1255,6 @@ cpu0_vid_show(struct device *dev, struct
>device_attribute *attr, char *buf)
>> }
>> static DEVICE_ATTR_RO(cpu0_vid);
>>
>> -
>> /* Case open detection */
>>
>> static ssize_t
>> @@ -1802,83 +1289,201 @@ clear_caseopen(struct device *dev, struct
>device_attribute *attr,
>> return count;
>> }
>>
>> -static struct sensor_device_attribute_2 sda_caseopen[] = {
>> - SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen,
>> - clear_caseopen, 0x80, 0x10),
>> - SENSOR_ATTR_2(intrusion1_alarm, S_IWUSR | S_IRUGO, show_caseopen,
>> - clear_caseopen, 0x40, 0x40),
>> +static SENSOR_DEVICE_ATTR_2(intrusion0_alarm, 0644, show_caseopen,
>> + clear_caseopen, 0x80, 0x10);
>> +static SENSOR_DEVICE_ATTR_2(intrusion1_alarm, 0644, show_caseopen,
>> + clear_caseopen, 0x40, 0x40);
>> +
>> +static struct attribute *static_sensor_attrs[] = {
>> + &sensor_dev_attr_pwm1_stop_time.dev_attr.attr,
>> + &sensor_dev_attr_pwm2_stop_time.dev_attr.attr,
>> + &sensor_dev_attr_pwm1_start_output.dev_attr.attr,
>> + &sensor_dev_attr_pwm2_start_output.dev_attr.attr,
>> + &sensor_dev_attr_pwm1_stop_output.dev_attr.attr,
>> + &sensor_dev_attr_pwm2_stop_output.dev_attr.attr,
>> + &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
>> + NULL,
>> };
>>
>> -/*
>> - * Driver and device management
>> - */
>> +static struct attribute *other_sensor_attrs[] = {
>> + &dev_attr_cpu0_vid.attr,
>> + &sensor_dev_attr_intrusion1_alarm.dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *sda_sf3_max_step_arrays_attrs[] = {
>> + &sda_sf3_max_step_arrays[0].dev_attr.attr,
>> + &sda_sf3_max_step_arrays[1].dev_attr.attr,
>> + &sda_sf3_max_step_arrays[2].dev_attr.attr,
>> + &sda_sf3_max_step_arrays[3].dev_attr.attr,
>> + &sda_sf3_max_step_arrays[4].dev_attr.attr,
>> + &sda_sf3_max_step_arrays[5].dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *sda_sf3_arrays_fan3_attrs[] = {
>> + &sda_sf3_arrays_fan3[0].dev_attr.attr,
>> + &sda_sf3_arrays_fan3[1].dev_attr.attr,
>> + &sda_sf3_arrays_fan3[2].dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *sda_sf3_arrays_fan4_attrs[] = {
>> + &sda_sf3_arrays_fan4[0].dev_attr.attr,
>> + &sda_sf3_arrays_fan4[1].dev_attr.attr,
>> + &sda_sf3_arrays_fan4[2].dev_attr.attr,
>> + &sda_sf3_arrays_fan4[3].dev_attr.attr,
>> + &sda_sf3_arrays_fan4[4].dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *sda_target_temp_attrs[] = {
>> + &sda_target_temp[0].dev_attr.attr,
>> + &sda_target_temp[1].dev_attr.attr,
>> + &sda_target_temp[2].dev_attr.attr,
>> + &sda_target_temp[3].dev_attr.attr,
>> + NULL,
>> +};
>>
>> -static void w83627ehf_device_remove_files(struct device *dev)
>> +static struct attribute *sda_tolerance_attrs[] = {
>> + &sda_tolerance[0].dev_attr.attr,
>> + &sda_tolerance[1].dev_attr.attr,
>> + &sda_tolerance[2].dev_attr.attr,
>> + &sda_tolerance[3].dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static umode_t other_sensor_is_visible(struct kobject *kobj,
>> + struct attribute *attr, int idx)
>> {
>> - /*
>> - * some entries in the following arrays may not have been used in
>> - * device_create_file(), but device_remove_file() will ignore them
>> - */
>> - int i;
>> + struct device *dev = kobj_to_dev(kobj);
>> struct w83627ehf_data *data = dev_get_drvdata(dev);
>>
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
>> - device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
>> - struct sensor_device_attribute *attr =
>> - &sda_sf3_max_step_arrays[i];
>> - if (data->REG_FAN_STEP_OUTPUT &&
>> - data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
>> - device_remove_file(dev, &attr->dev_attr);
>> - }
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
>> - device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
>> - device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
>> - for (i = 0; i < data->in_num; i++) {
>> - if ((i == 6) && data->in6_skip)
>> - continue;
>> - device_remove_file(dev, &sda_in_input[i].dev_attr);
>> - device_remove_file(dev, &sda_in_alarm[i].dev_attr);
>> - device_remove_file(dev, &sda_in_min[i].dev_attr);
>> - device_remove_file(dev, &sda_in_max[i].dev_attr);
>> - }
>> - for (i = 0; i < 5; i++) {
>> - device_remove_file(dev, &sda_fan_input[i].dev_attr);
>> - device_remove_file(dev, &sda_fan_alarm[i].dev_attr);
>> - device_remove_file(dev, &sda_fan_div[i].dev_attr);
>> - device_remove_file(dev, &sda_fan_min[i].dev_attr);
>> - }
>> - for (i = 0; i < data->pwm_num; i++) {
>> - device_remove_file(dev, &sda_pwm[i].dev_attr);
>> - device_remove_file(dev, &sda_pwm_mode[i].dev_attr);
>> - device_remove_file(dev, &sda_pwm_enable[i].dev_attr);
>> - device_remove_file(dev, &sda_target_temp[i].dev_attr);
>> - device_remove_file(dev, &sda_tolerance[i].dev_attr);
>> + if (idx == 0) { /*dev_attr_cpu0_vid*/
>> + if (data->sio_data->kind == w83627uhg)
>> + return 0;
>> + else
>> + return 0444;
>> }
>> - for (i = 0; i < NUM_REG_TEMP; i++) {
>> - if (!(data->have_temp & (1 << i)))
>> - continue;
>> - device_remove_file(dev, &sda_temp_input[i].dev_attr);
>> - device_remove_file(dev, &sda_temp_label[i].dev_attr);
>> - if (i == 2 && data->temp3_val_only)
>> - continue;
>> - device_remove_file(dev, &sda_temp_max[i].dev_attr);
>> - device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
>> - if (i > 2)
>> - continue;
>> - device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
>> - device_remove_file(dev, &sda_temp_type[i].dev_attr);
>> - device_remove_file(dev, &sda_temp_offset[i].dev_attr);
>> + if (idx == 1) { /*intrusion1*/
>> + if (data->sio_data->kind == nct6776)
>> + return 0644;
>> }
>>
>> - device_remove_file(dev, &sda_caseopen[0].dev_attr);
>> - device_remove_file(dev, &sda_caseopen[1].dev_attr);
>> + return 0;
>> +}
>> +
>> +static umode_t sda_sf3_max_step_arrays_is_visible(struct kobject
>*kobj,
>> + struct attribute *attr,
>> + int idx)
>> +{
>> + struct device *dev = kobj_to_dev(kobj);
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> + struct sensor_device_attribute *sattr =
>&sda_sf3_max_step_arrays[idx];
>> +
>> + if (data->REG_FAN_STEP_OUTPUT &&
>> + data->REG_FAN_STEP_OUTPUT[sattr->index] != 0xff)
>> + return 0644;
>> + else
>> + return 0;
>> +}
>> +
>> +static umode_t sda_sf3_arrays_fan3_attrs_is_visible(struct kobject
>*kobj,
>> + struct attribute *attr,
>> + int idx)
>> +{
>> + struct device *dev = kobj_to_dev(kobj);
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
>> + return 0644;
>> +
>> + return 0;
>> +}
>> +
>> +static umode_t sda_sf3_arrays_fan4_is_visible(struct kobject *kobj,
>> + struct attribute *attr, int idx)
>> +{
>> + struct device *dev = kobj_to_dev(kobj);
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>>
>> - device_remove_file(dev, &dev_attr_name);
>> - device_remove_file(dev, &dev_attr_cpu0_vid);
>> + if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
>> + return 0644;
>> +
>> + return 0;
>> +}
>> +
>> +static umode_t sda_tolerance_is_visible(struct kobject *kobj,
>> + struct attribute *attr, int idx)
>> +{
>> + struct device *dev = kobj_to_dev(kobj);
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + if ((data->has_fan & (1 << idx)) && (idx < data->pwm_num))
>> + return 0644;
>> + return 0;
>> +}
>> +
>> +static umode_t sda_target_temp_is_visible(struct kobject *kobj,
>> + struct attribute *attr, int idx)
>> +{
>> + struct device *dev = kobj_to_dev(kobj);
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + if ((data->has_fan & (1 << idx)) && (idx < data->pwm_num))
>> + return 0644;
>> + return 0;
>> }
>>
>> +static const struct attribute_group static_sensor_group = {
>> + .attrs = static_sensor_attrs,
>> +};
>> +
>> +static const struct attribute_group other_sensor_group = {
>> + .attrs = other_sensor_attrs,
>> + .is_visible = other_sensor_is_visible,
>> +};
>> +
>> +static const struct attribute_group sda_sf3_max_step_arrays_group =
>{
>> + .attrs = sda_sf3_max_step_arrays_attrs,
>> + .is_visible = sda_sf3_max_step_arrays_is_visible,
>> +};
>> +
>> +static const struct attribute_group sda_sf3_arrays_fan3_group = {
>> + .attrs = sda_sf3_arrays_fan3_attrs,
>> + .is_visible = sda_sf3_arrays_fan3_attrs_is_visible,
>> +};
>> +
>> +static const struct attribute_group sda_sf3_arrays_fan4_group = {
>> + .attrs = sda_sf3_arrays_fan4_attrs,
>> + .is_visible = sda_sf3_arrays_fan4_is_visible,
>> +};
>> +
>> +static const struct attribute_group sda_tolerance_group = {
>> + .attrs = sda_tolerance_attrs,
>> + .is_visible = sda_tolerance_is_visible,
>> +};
>> +
>> +static const struct attribute_group sda_target_temp_group = {
>> + .attrs = sda_target_temp_attrs,
>> + .is_visible = sda_target_temp_is_visible,
>> +};
>> +
>> +static const struct attribute_group *sensor_groups[] = {
>> + &static_sensor_group,
>> + &other_sensor_group,
>> + &sda_sf3_max_step_arrays_group,
>> + &sda_sf3_arrays_fan3_group,
>> + &sda_sf3_arrays_fan4_group,
>> + &sda_tolerance_group,
>> + &sda_target_temp_group,
>> + NULL,
>> +};
>> +
>> +/*
>> + * Driver and device management
>> + */
>> +
>> /* Get the monitoring functions started */
>> static inline void w83627ehf_init_device(struct w83627ehf_data
>*data,
>> enum kinds kind)
>> @@ -2048,6 +1653,565 @@ w83627ehf_check_fan_inputs(const struct
>w83627ehf_sio_data *sio_data,
>> }
>> }
>>
>> +static int w3627ehf_read_temp(struct device *dev, u32 attr, int
>channel,
>> + long *val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_temp_input:
>> + *val = LM75_TEMP_FROM_REG(data->temp[channel]);
>> + return 0;
>> + case hwmon_temp_max:
>> + *val = LM75_TEMP_FROM_REG(data->temp_max[channel]);
>> + return 0;
>> + case hwmon_temp_max_hyst:
>> + *val = LM75_TEMP_FROM_REG(data->temp_max_hyst[channel]);
>> + return 0;
>> + case hwmon_temp_type:
>> + *val = data->temp_type[channel];
>> + return 0;
>> + case hwmon_temp_offset:
>> + *val = data->temp_offset[channel] * 1000;
>> + return 0;
>> + case hwmon_temp_alarm:
>> + switch (channel) {
>> + case 0:
>> + channel = 4;
>> + break;
>> + case 1:
>> + channel = 5;
>> + break;
>> + case 2:
>> + channel = 13;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + *val = ((data->alarms >> channel) & 0x01);
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static int w3627ehf_write_temp(struct device *dev, u32 attr, int
>channel,
>> + long val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_temp_offset:
>> + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
>> + mutex_lock(&data->update_lock);
>> + data->temp_offset[channel] = val;
>> + w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[channel],
>> + val);
>> + mutex_unlock(&data->update_lock);
>> + break;
>> + case hwmon_temp_max:
>> + mutex_lock(&data->update_lock);
>> + data->temp_max[channel] = LM75_TEMP_TO_REG(val);
>> + w83627ehf_write_temp(data, data->reg_temp_over[channel],
>> + data->temp_max[channel]);
>> + mutex_unlock(&data->update_lock);
>> + break;
>> + case hwmon_temp_max_hyst:
>> + mutex_lock(&data->update_lock);
>> + data->temp_max_hyst[channel] = LM75_TEMP_TO_REG(val);
>> + w83627ehf_write_temp(data, data->reg_temp_hyst[channel],
>> + data->temp_max_hyst[channel]);
>> + mutex_unlock(&data->update_lock);
>> + break;
>> +
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> + return 0;
>> +}
>> +
>> +static umode_t w3627ehf_temp_is_visible(const void *_data, u32 attr,
>> + int channel)
>> +{
>> + const struct w83627ehf_data *data = _data;
>> +
>> + if (!(data->have_temp & (1 << channel)))
>> + return 0;
>> +
>> + switch (attr) {
>> + case hwmon_temp_label:
>> + if (data->temp_label)
>> + return 0444;
>> + return 0;
>> + case hwmon_temp_input:
>> + return 0444;
>> + case hwmon_temp_max:
>> + if (channel == 2 && data->temp3_val_only)
>> + return 0;
>> + else if (data->reg_temp_over[channel])
>> + return 0644;
>> + else
>> + return 0;
>> + case hwmon_temp_max_hyst:
>> + if (channel == 2 && data->temp3_val_only)
>> + return 0;
>> + else if (data->reg_temp_hyst[channel])
>> + return 0644;
>> + else
>> + return 0;
>> + case hwmon_temp_alarm:
>> + case hwmon_temp_type:
>> + return 0444;
>> + case hwmon_temp_offset:
>> + if (data->have_temp_offset & (1 << channel))
>> + return 0644;
>> + return 0;
>> + }
>> + return 0;
>> +}
>> +
>> +static int w3627ehf_write_fan(struct device *dev, u32 attr, int
>channel,
>> + long val)
>> +{
>> + switch (attr) {
>> + case hwmon_fan_min:
>> + store_fan_min(dev, channel, val);
>> + break;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int w3627ehf_read_fan(struct device *dev, u32 attr, int
>channel,
>> + long *val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_fan_alarm:
>> + //the fan sensors have different offsets
>> + switch (channel) {
>> + case 0:
>> + channel = 6;
>> + break;
>> + case 1:
>> + channel = 7;
>> + break;
>> + case 2:
>> + channel = 11;
>> + break;
>> + case 3:
>> + channel = 10;
>> + break;
>> + case 4:
>> + channel = 23;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + *val = ((data->alarms >> channel) & 0x01);
>> + return 0;
>> + case hwmon_fan_input:
>> + *val = data->rpm[channel];
>> + return 0;
>> + case hwmon_fan_min:
>> + *val = data->fan_from_reg_min(data->fan_min[channel],
>> + data->fan_div[channel]);
>> + return 0;
>> + case hwmon_fan_div:
>> + *val = div_from_reg(data->fan_div[channel]);
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static umode_t w3627ehf_fan_is_visible(const void *_data, u32 attr,
>int channel)
>> +{
>> + const struct w83627ehf_data *data = _data;
>> +
>> + if (!(data->has_fan & (1 << channel)))
>> + return 0;
>> +
>> + switch (attr) {
>> + case hwmon_fan_alarm:
>> + case hwmon_fan_input:
>> + return 0444;
>> + case hwmon_fan_div:
>> + if (data->sio_data->kind != nct6776)
>> + return 0444;
>> + else
>> + return 0;
>> + case hwmon_fan_min:
>> + return 0644;
>> + }
>> + return 0;
>> +}
>> +
>> +static int w3627ehf_write_pwm(struct device *dev, u32 attr, int
>channel,
>> + long val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>> + u16 reg;
>> +
>> + switch (attr) {
>> + case hwmon_pwm_input:
>> + val = clamp_val(val, 0, 255);
>> + mutex_lock(&data->update_lock);
>> + data->pwm[channel] = val;
>> + w83627ehf_write_value(data, data->REG_PWM[channel], val);
>> + mutex_unlock(&data->update_lock);
>> + return 0;
>> + case hwmon_pwm_mode:
>> + if (val > 1)
>> + return -EINVAL;
>> +
>> + /* On NCT67766F, DC mode is only supported for pwm1 */
>> + if (sio_data->kind == nct6776 && channel && val != 1)
>> + return -EINVAL;
>> +
>> + mutex_lock(&data->update_lock);
>> + reg = w83627ehf_read_value(data,
>> + W83627EHF_REG_PWM_ENABLE[channel]);
>> + data->pwm_mode[channel] = val;
>> + reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[channel]);
>> + if (!val)
>> + reg |= 1 << W83627EHF_PWM_MODE_SHIFT[channel];
>> + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel],
>> + reg);
>> + mutex_unlock(&data->update_lock);
>> + return 0;
>> + case hwmon_pwm_enable:
>> + if (!val || (val > 4 && val != data->pwm_enable_orig[channel]))
>> + return -EINVAL;
>> + /* SmartFan III mode is not supported on NCT6776F */
>> + if (sio_data->kind == nct6776 && val == 4)
>> + return -EINVAL;
>> +
>> + mutex_lock(&data->update_lock);
>> + data->pwm_enable[channel] = val;
>> + if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
>> + reg = w83627ehf_read_value(data,
>> + NCT6775_REG_FAN_MODE[channel]);
>> + reg &= 0x0f;
>> + reg |= (val - 1) << 4;
>> + w83627ehf_write_value(data,
>> + NCT6775_REG_FAN_MODE[channel],
>> + reg);
>> + } else {
>> + reg = w83627ehf_read_value(data,
>> + W83627EHF_REG_PWM_ENABLE[channel]);
>> + reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]);
>> + reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel];
>> + w83627ehf_write_value(data,
>> + W83627EHF_REG_PWM_ENABLE[channel],
>> + reg);
>> + }
>> + mutex_unlock(&data->update_lock);
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static int w3627ehf_write_input(struct device *dev, u32 attr, int
>channel,
>> + long val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_in_min:
>> + mutex_lock(&data->update_lock);
>> + data->in_min[channel] = in_to_reg(val, channel, data->scale_in);
>> + w83627ehf_write_value(data, W83627EHF_REG_IN_MIN(channel),
>> + data->in_min[channel]);
>> + mutex_unlock(&data->update_lock);
>> + return 0;
>> + case hwmon_in_max:
>> + mutex_lock(&data->update_lock);
>> + data->in_max[channel] = in_to_reg(val, channel, data->scale_in);
>> + w83627ehf_write_value(data, W83627EHF_REG_IN_MAX(channel),
>> + data->in_max[channel]);
>> + mutex_unlock(&data->update_lock);
>> + return 0;
>> + }
>> + return -EOPNOTSUPP;
>> +}
>> +
>> +static int w3627ehf_read_pwm(struct device *dev, u32 attr, int
>channel,
>> + long *val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_pwm_input:
>> + *val = data->pwm[channel];
>> + return 0;
>> + case hwmon_pwm_mode:
>> + *val = data->pwm_mode[channel];
>> + return 0;
>> + case hwmon_pwm_enable:
>> + *val = data->pwm_enable[channel];
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static umode_t w3627ehf_pwm_is_visible(const void *_data, u32 attr,
>int channel)
>> +{
>> + const struct w83627ehf_data *data = _data;
>> +
>> + switch (attr) {
>> + case hwmon_pwm_input:
>> + case hwmon_pwm_mode:
>> + case hwmon_pwm_enable:
>> + if (data->has_fan & (1 << channel)) {
>> + if (channel < data->pwm_num)
>> + return 0644;
>> + }
>> + return 0;
>> + }
>> + return 0;
>> +}
>> +
>> +static int w3627ehf_read_input(struct device *dev, u32 attr, int
>channel,
>> + long *val)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + switch (attr) {
>> + case hwmon_in_input:
>> + *val = in_from_reg(data->in[channel], channel, data->scale_in);
>> + return 0;
>> + case hwmon_in_min:
>> + *val = in_from_reg(data->in_min[channel], channel,
>> + data->scale_in);
>> + return 0;
>> + case hwmon_in_max:
>> + *val = in_from_reg(data->in_max[channel], channel,
>> + data->scale_in);
>> + return 0;
>> + case hwmon_in_alarm:
>> + switch (channel) {
>> + case 0:
>> + channel = 0;
>> + break;
>> + case 1:
>> + channel = 1;
>> + break;
>> + case 2:
>> + channel = 2;
>> + break;
>> + case 3:
>> + channel = 3;
>> + break;
>> + case 4:
>> + channel = 8;
>> + break;
>> + case 5:
>> + channel = 21;
>> + break;
>> + case 6:
>> + channel = 20;
>> + break;
>> + case 7:
>> + channel = 16;
>> + break;
>> + case 8:
>> + channel = 17;
>> + break;
>> + case 9:
>> + channel = 19;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + *val = ((data->alarms >> channel) & 0x01);
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static umode_t w3627ehf_input_is_visible(const void *_data, u32
>attr,
>> + int channel)
>> +{
>> + const struct w83627ehf_data *data = _data;
>> +
>> + //skip channel 6 if requested
>> + if ((channel == 6) && data->in6_skip)
>> + return 0;
>> +
>> + switch (attr) {
>> + case hwmon_in_input:
>> + case hwmon_in_alarm:
>> + return 0444;
>> + case hwmon_in_min:
>> + case hwmon_in_max:
>> + return 0644;
>> + default:
>> + return 0;
>> + }
>> +}
>> +
>> +static int w3627ehf_read_string(struct device *dev,
>> + enum hwmon_sensor_types type, u32 attr,
>> + int channel, const char **buf)
>> +{
>> + struct w83627ehf_data *data = dev_get_drvdata(dev);
>> +
>> + w83627ehf_update_device(dev);
>> + if ((type == hwmon_fan && attr == hwmon_fan_label) ||
>> + (type == hwmon_temp && attr == hwmon_temp_label)) {
>> + *buf = data->temp_label[data->temp_src[channel]];
>> + return 0;
>> + }
>> + return -EOPNOTSUPP;
>> +}
>> +
>> +static int w3627ehf_read(struct device *dev, enum hwmon_sensor_types
>type,
>> + u32 attr, int channel, long *val)
>> +{
>> + w83627ehf_update_device(dev);
>> + switch (type) {
>> + case hwmon_fan:
>> + return w3627ehf_read_fan(dev, attr, channel, val);
>> + case hwmon_temp:
>> + return w3627ehf_read_temp(dev, attr, channel, val);
>> + case hwmon_in:
>> + return w3627ehf_read_input(dev, attr, channel, val);
>> + case hwmon_pwm:
>> + return w3627ehf_read_pwm(dev, attr, channel, val);
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static int w3627ehf_write(struct device *dev, enum
>hwmon_sensor_types type,
>> + u32 attr, int channel, long val)
>> +{
>> + switch (type) {
>> + case hwmon_fan:
>> + return w3627ehf_write_fan(dev, attr, channel, val);
>> + case hwmon_in:
>> + return w3627ehf_write_input(dev, attr, channel, val);
>> + case hwmon_pwm:
>> + return w3627ehf_write_pwm(dev, attr, channel, val);
>> + case hwmon_temp:
>> + return w3627ehf_write_temp(dev, attr, channel, val);
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +static umode_t w3627ehf_is_visible(const void *data,
>> + enum hwmon_sensor_types type, u32 attr,
>> + int channel)
>> +{
>> + switch (type) {
>> + case hwmon_fan:
>> + return w3627ehf_fan_is_visible(data, attr, channel);
>> + case hwmon_pwm:
>> + return w3627ehf_pwm_is_visible(data, attr, channel);
>> + case hwmon_in:
>> + return w3627ehf_input_is_visible(data, attr, channel);
>> + case hwmon_temp:
>> + return w3627ehf_temp_is_visible(data, attr, channel);
>> + default:
>> + return 0;
>> + }
>> +}
>> +
>> +static const u32 w3627ehf_temp_config[] = {
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST |
>> + HWMON_T_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST |
>> + HWMON_T_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST |
>> + HWMON_T_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | HWMON_T_MAX_HYST,
>> + 0
>> +};
>> +
>> +static const u32 w3627ehf_fan_config[] = {
>> + HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_MIN,
>> + HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_MIN,
>> + HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_MIN,
>> + HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_MIN,
>> + HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_MIN,
>> + 0
>> +};
>> +
>> +static const u32 w3627ehf_pwm_config[] = {
>> + HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE,
>> + HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE,
>> + HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE,
>> + HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE,
>> + 0
>> +};
>> +
>> +static const u32 w3627ehf_input_config[] = {
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_ALARM,
>> + 0
>> +};
>> +
>> +static const struct hwmon_channel_info w3627ehf_temp = {
>> + .type = hwmon_temp,
>> + .config = w3627ehf_temp_config,
>> +};
>> +
>> +static const struct hwmon_channel_info w3627ehf_fan = {
>> + .type = hwmon_fan,
>> + .config = w3627ehf_fan_config,
>> +};
>> +
>> +static const struct hwmon_channel_info w3627ehf_pwm = {
>> + .type = hwmon_pwm,
>> + .config = w3627ehf_pwm_config,
>> +};
>> +
>> +static const struct hwmon_channel_info w3627ehf_input = {
>> + .type = hwmon_in,
>> + .config = w3627ehf_input_config,
>> +};
>> +
>> +static const struct hwmon_ops w3627ehf_hwmon_ops = {
>> + .is_visible = w3627ehf_is_visible,
>> + .read = w3627ehf_read,
>> + .read_string = w3627ehf_read_string,
>> + .write = w3627ehf_write,
>> +};
>> +
>> +static const struct hwmon_channel_info *w3627ehf_info[] = {
>> + &w3627ehf_temp,
>> + &w3627ehf_fan,
>> + &w3627ehf_pwm,
>> + &w3627ehf_input,
>> + NULL
>> +};
>> +
>> +static const struct hwmon_chip_info w83627ehf_chip_info = {
>> + .ops = &w3627ehf_hwmon_ops,
>> + .info = w3627ehf_info,
>> +};
>> +
>> static int w83627ehf_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> @@ -2073,6 +2237,7 @@ static int w83627ehf_probe(struct
>platform_device *pdev)
>> goto exit_release;
>> }
>>
>> + data->sio_data = sio_data;
>> data->addr = res->start;
>> mutex_init(&data->lock);
>> mutex_init(&data->update_lock);
>> @@ -2369,11 +2534,6 @@ static int w83627ehf_probe(struct
>platform_device *pdev)
>> */
>> superio_select(sio_data->sioreg, W83667HG_LD_VID);
>> data->vid = superio_inb(sio_data->sioreg, 0xe3);
>> - err = device_create_file(dev, &dev_attr_cpu0_vid);
>> - if (err) {
>> - superio_exit(sio_data->sioreg);
>> - goto exit_release;
>> - }
>> } else if (sio_data->kind != w83627uhg) {
>> superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
>> if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
>> @@ -2408,11 +2568,6 @@ static int w83627ehf_probe(struct
>platform_device *pdev)
>> if (sio_data->kind == w83627ehf) /* 6 VID pins only */
>> data->vid &= 0x3f;
>>
>> - err = device_create_file(dev, &dev_attr_cpu0_vid);
>> - if (err) {
>> - superio_exit(sio_data->sioreg);
>> - goto exit_release;
>> - }
>> } else {
>> dev_info(dev,
>> "VID pins in output mode, CPU VID not available\n");
>> @@ -2446,151 +2601,17 @@ static int w83627ehf_probe(struct
>platform_device *pdev)
>> for (i = 0; i < data->pwm_num; i++)
>> data->pwm_enable_orig[i] = data->pwm_enable[i];
>>
>> - /* Register sysfs hooks */
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) {
>> - err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> -
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
>> - struct sensor_device_attribute *attr =
>> - &sda_sf3_max_step_arrays[i];
>> - if (data->REG_FAN_STEP_OUTPUT &&
>> - data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
>> - err = device_create_file(dev, &attr->dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - }
>> - /* if fan3 and fan4 are enabled create the sf3 files for them */
>> - if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
>> - err = device_create_file(dev,
>> - &sda_sf3_arrays_fan3[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
>> - for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
>> - err = device_create_file(dev,
>> - &sda_sf3_arrays_fan4[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> -
>> - for (i = 0; i < data->in_num; i++) {
>> - if ((i == 6) && data->in6_skip)
>> - continue;
>> - if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_in_alarm[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_in_min[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_in_max[i].dev_attr)))
>> - goto exit_remove;
>> - }
>> -
>> - for (i = 0; i < 5; i++) {
>> - if (data->has_fan & (1 << i)) {
>> - if ((err = device_create_file(dev,
>> - &sda_fan_input[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_fan_alarm[i].dev_attr)))
>> - goto exit_remove;
>> - if (sio_data->kind != nct6776) {
>> - err = device_create_file(dev,
>> - &sda_fan_div[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if (data->has_fan_min & (1 << i)) {
>> - err = device_create_file(dev,
>> - &sda_fan_min[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if (i < data->pwm_num &&
>> - ((err = device_create_file(dev,
>> - &sda_pwm[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_pwm_mode[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_pwm_enable[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_target_temp[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_tolerance[i].dev_attr))))
>> - goto exit_remove;
>> - }
>> - }
>> -
>> - for (i = 0; i < NUM_REG_TEMP; i++) {
>> - if (!(data->have_temp & (1 << i)))
>> - continue;
>> - err = device_create_file(dev, &sda_temp_input[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - if (data->temp_label) {
>> - err = device_create_file(dev,
>> - &sda_temp_label[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if (i == 2 && data->temp3_val_only)
>> - continue;
>> - if (data->reg_temp_over[i]) {
>> - err = device_create_file(dev,
>> - &sda_temp_max[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if (data->reg_temp_hyst[i]) {
>> - err = device_create_file(dev,
>> - &sda_temp_max_hyst[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - if (i > 2)
>> - continue;
>> - if ((err = device_create_file(dev,
>> - &sda_temp_alarm[i].dev_attr))
>> - || (err = device_create_file(dev,
>> - &sda_temp_type[i].dev_attr)))
>> - goto exit_remove;
>> - if (data->have_temp_offset & (1 << i)) {
>> - err = device_create_file(dev,
>> - &sda_temp_offset[i].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> - }
>> -
>> - err = device_create_file(dev, &sda_caseopen[0].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> -
>> - if (sio_data->kind == nct6776) {
>> - err = device_create_file(dev, &sda_caseopen[1].dev_attr);
>> - if (err)
>> - goto exit_remove;
>> - }
>> -
>> - err = device_create_file(dev, &dev_attr_name);
>> - if (err)
>> - goto exit_remove;
>> -
>> - data->hwmon_dev = hwmon_device_register(dev);
>> + data->hwmon_dev = hwmon_device_register_with_info(dev, data->name,
>> + data,
>> + &w83627ehf_chip_info,
>> + sensor_groups);
>> if (IS_ERR(data->hwmon_dev)) {
>> err = PTR_ERR(data->hwmon_dev);
>> - goto exit_remove;
>> + goto exit_release;
>> }
>>
>> return 0;
>>
>> -exit_remove:
>> - w83627ehf_device_remove_files(dev);
>> exit_release:
>> release_region(res->start, IOREGION_LENGTH);
>> exit:
>> @@ -2602,7 +2623,6 @@ static int w83627ehf_remove(struct
>platform_device *pdev)
>> struct w83627ehf_data *data = platform_get_drvdata(pdev);
>>
>> hwmon_device_unregister(data->hwmon_dev);
>> - w83627ehf_device_remove_files(&pdev->dev);
>> release_region(data->addr, IOREGION_LENGTH);
>>
>> return 0;
>> @@ -2612,7 +2632,7 @@ static int w83627ehf_remove(struct
>platform_device *pdev)
>> static int w83627ehf_suspend(struct device *dev)
>> {
>> struct w83627ehf_data *data = w83627ehf_update_device(dev);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>>
>> mutex_lock(&data->update_lock);
>> data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
>> @@ -2628,7 +2648,7 @@ static int w83627ehf_suspend(struct device
>*dev)
>> static int w83627ehf_resume(struct device *dev)
>> {
>> struct w83627ehf_data *data = dev_get_drvdata(dev);
>> - struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
>> + struct w83627ehf_sio_data *sio_data = data->sio_data;
>> int i;
>>
>> mutex_lock(&data->update_lock);
>> --
>> 2.10.2
>>
--
Sent from my mobile
Powered by blists - more mailing lists