linux-kernel - Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170323205256.GO10760@atomide.com>
Date:   Thu, 23 Mar 2017 13:52:57 -0700
From:   Tony Lindgren <tony@...mide.com>
To:     Keerthy <j-keerthy@...com>
Cc:     edubezval@...il.com, rui.zhang@...el.com,
        linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
        robh+dt@...nel.org, t-kristo@...com
Subject: Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset
 data to device tree

* Keerthy <j-keerthy@...com> [170321 20:45]:
> 
> 
> On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> > Currently the slope and offset values for calculating the
> > hot spot temperature of a particular thermal zone is part
> > of driver data. Pass them here instead and obtain the values
> > while of node parsing.
> > 
> > Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 
> 
> Hi Eduardo,
> 
> If the series looks okay could you please pull this?

Also.. Are the dts changes safe for me to pick separately?

Regards,

Tony


> > Changes in v2:
> > 
> >   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
> > 
> > Keerthy (8):
> >   arm: dts: omap3: Add cpu_thermal zone
> >   ARM: DRA7: Thermal: Add slope and offset values
> >   ARM: OMAP5: Thermal: Add slope and offset values
> >   ARM: OMAP443x: Thermal: Add slope and offset values
> >   ARM: OMAP4460: Thermal: Add slope and offset values
> >   thermal: ti-soc-thermal: Fetch slope and offset from DT
> >   thermal: ti-soc-thermal: Remove redundant constants
> >   thermal: ti-soc-thermal: Remove redundant code
> > 
> >  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
> >  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
> >  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
> >  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
> >  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
> >  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
> >  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
> >  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
> >  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
> >  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
> >  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
> >  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
> >  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
> >  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
> >  14 files changed, 71 insertions(+), 201 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
> >