linux-kernel - Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 24 Mar 2017 08:56:55 +0530
From:   Keerthy <j-keerthy@...com>
To:     Tony Lindgren <tony@...mide.com>
CC:     <edubezval@...il.com>, <rui.zhang@...el.com>,
        <linux-omap@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
        <robh+dt@...nel.org>, <t-kristo@...com>
Subject: Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data
 to device tree



On Friday 24 March 2017 02:22 AM, Tony Lindgren wrote:
> * Keerthy <j-keerthy@...com> [170321 20:45]:
>>
>>
>> On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
>>> Currently the slope and offset values for calculating the
>>> hot spot temperature of a particular thermal zone is part
>>> of driver data. Pass them here instead and obtain the values
>>> while of node parsing.
>>>
>>> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 
>>
>> Hi Eduardo,
>>
>> If the series looks okay could you please pull this?
> 
> Also.. Are the dts changes safe for me to pick separately?

Yes Tony they are safe to pulled separately.

> 
> Regards,
> 
> Tony
> 
> 
>>> Changes in v2:
>>>
>>>   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
>>>
>>> Keerthy (8):
>>>   arm: dts: omap3: Add cpu_thermal zone
>>>   ARM: DRA7: Thermal: Add slope and offset values
>>>   ARM: OMAP5: Thermal: Add slope and offset values
>>>   ARM: OMAP443x: Thermal: Add slope and offset values
>>>   ARM: OMAP4460: Thermal: Add slope and offset values
>>>   thermal: ti-soc-thermal: Fetch slope and offset from DT
>>>   thermal: ti-soc-thermal: Remove redundant constants
>>>   thermal: ti-soc-thermal: Remove redundant code
>>>
>>>  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
>>>  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
>>>  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
>>>  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
>>>  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
>>>  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
>>>  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
>>>  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
>>>  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
>>>  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
>>>  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
>>>  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
>>>  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
>>>  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
>>>  14 files changed, 71 insertions(+), 201 deletions(-)
>>>  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
>>>