[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <149064437219.54062.14490095828514639237@resonance>
Date: Mon, 27 Mar 2017 12:52:52 -0700
From: Michael Turquette <mturquette@...libre.com>
To: Kevin Hilman <khilman@...libre.com>,
"Jerome Brunet" <jbrunet@...libre.com>
Cc: "Stephen Boyd" <sboyd@...eaurora.org>,
"Carlo Caione" <carlo@...one.org>, linux-clk@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 0/9] clk: meson: update clock controller for audio support
Quoting Kevin Hilman (2017-03-10 16:39:27)
> Jerome Brunet <jbrunet@...libre.com> writes:
>
> > This patchset is a first round of update to the meson clock controllers
> > to bring audio support. The patchset is based on clk-next. It could be
> > rebased on amlogic tree later on, if you prefer the patches to go through
> > Kevin's tree.
>
> I'd prefer these go through the clk tree, and get an immutable branch
> that I can use for my stuff that goes through the arm-soc tree.
Applied to clk-meson, a stable branch, which has been merged into
clk-next.
Kevin, feel free to use clk-meson or any commit id therein: they will
not be rebased.
Regards,
Mike
>
> Kevin
>
> > First patch fix an issue found while writing patch 5 (Giving ternary
> > operator to SET_PARM)
> >
> > Following Stephen comment on the v1, patch 2 adds the const qualifiers
> > missing upstream.
> >
> > Patches 3 and 4 put the generic muxes and divisors declaration in tables so
> > the register address fixup works in the same way as the clock gates. We are
> > going to add more of these clock types for audio or gpu support, so we
> > can't continue to fix addresses individually like it is currently done.
> >
> > Patches 5 to 8 improve the support of the mpll clocks, now allowing the
> > rate to be set. Among other things, the mplls are the parent clocks of the
> > i2s and spdif clocks.
> >
> > Patch 9 expose the clock gates required to power on the i2s output.
> >
> > These patches have been tested on the meson gxbb p200 board, as part of the
> > ongoing work to bring audio support to meson SoC family.
> >
> > Changes since v1 [0]:
> > * Add SET_PARM fix to the series
> > * Add missing const qualifiers to the clock arrays
> > * No more additional patches required as SAR clocks have been merged
> >
> > [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com
> >
> > Jerome Brunet (9):
> > clk: meson: fix SET_PARM macro
> > clk: meson: add missing const qualifiers on gate arrays
> > clk: meson8b: put dividers and muxes in tables
> > clk: gxbb: put dividers and muxes in tables
> > clk: meson: mpll: add rw operation
> > clk: meson: gxbb: mpll: use rw operation
> > clk: meson8b: add the mplls clocks 0, 1 and 2
> > clk: meson: mpll: correct N2 maximum value
> > dt-bindings: clk: gxbb: expose i2s output clock gates
> >
> > drivers/clk/meson/clk-mpll.c | 152 ++++++++++++++++++++++++++++++++--
> > drivers/clk/meson/clkc.h | 6 +-
> > drivers/clk/meson/gxbb.c | 66 ++++++++++++---
> > drivers/clk/meson/gxbb.h | 10 +--
> > drivers/clk/meson/meson8b.c | 127 ++++++++++++++++++++++++++--
> > drivers/clk/meson/meson8b.h | 20 ++++-
> > include/dt-bindings/clock/gxbb-clkc.h | 5 ++
> > 7 files changed, 356 insertions(+), 30 deletions(-)
Powered by blists - more mailing lists