[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170330153106.14344-4-salil.mehta@huawei.com>
Date: Thu, 30 Mar 2017 16:30:50 +0100
From: Salil Mehta <salil.mehta@...wei.com>
To: <davem@...emloft.net>
CC: <salil.mehta@...wei.com>, <yisen.zhuang@...wei.com>,
<mehta.salil.lnk@...il.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linuxarm@...wei.com>,
lipeng <lipeng321@...wei.com>,
JinchuanTian <tianjinchuan1@...wei.com>
Subject: [PATCH net 03/19] net: hns: Optimize the code for GMAC pad and crc Config
From: lipeng <lipeng321@...wei.com>
This patch optimises the init configuration code leg
for gmac pad and crc set interface.
Signed-off-by: lipeng <lipeng321@...wei.com>
Signed-off-by: JinchuanTian <tianjinchuan1@...wei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@...wei.com>
Signed-off-by: Salil Mehta <salil.mehta@...wei.com>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 36 ++++++++++------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
index a8dbe00..723f3ae 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
@@ -148,6 +148,17 @@ static void hns_gmac_config_max_frame_length(void *mac_drv, u16 newval)
GMAC_MAX_FRM_SIZE_S, newval);
}
+static void hns_gmac_config_pad_and_crc(void *mac_drv, u8 newval)
+{
+ u32 tx_ctrl;
+ struct mac_driver *drv = (struct mac_driver *)mac_drv;
+
+ tx_ctrl = dsaf_read_dev(drv, GMAC_TRANSMIT_CONTROL_REG);
+ dsaf_set_bit(tx_ctrl, GMAC_TX_PAD_EN_B, !!newval);
+ dsaf_set_bit(tx_ctrl, GMAC_TX_CRC_ADD_B, !!newval);
+ dsaf_write_dev(drv, GMAC_TRANSMIT_CONTROL_REG, tx_ctrl);
+}
+
static void hns_gmac_config_an_mode(void *mac_drv, u8 newval)
{
struct mac_driver *drv = (struct mac_driver *)mac_drv;
@@ -250,7 +261,6 @@ static void hns_gmac_get_pausefrm_cfg(void *mac_drv, u32 *rx_pause_en,
static int hns_gmac_adjust_link(void *mac_drv, enum mac_speed speed,
u32 full_duplex)
{
- u32 tx_ctrl;
struct mac_driver *drv = (struct mac_driver *)mac_drv;
dsaf_set_dev_bit(drv, GMAC_DUPLEX_TYPE_REG,
@@ -279,14 +289,6 @@ static int hns_gmac_adjust_link(void *mac_drv, enum mac_speed speed,
return -EINVAL;
}
- tx_ctrl = dsaf_read_dev(drv, GMAC_TRANSMIT_CONTROL_REG);
- dsaf_set_bit(tx_ctrl, GMAC_TX_PAD_EN_B, 1);
- dsaf_set_bit(tx_ctrl, GMAC_TX_CRC_ADD_B, 1);
- dsaf_write_dev(drv, GMAC_TRANSMIT_CONTROL_REG, tx_ctrl);
-
- dsaf_set_dev_bit(drv, GMAC_MODE_CHANGE_EN_REG,
- GMAC_MODE_CHANGE_EB_B, 1);
-
return 0;
}
@@ -326,6 +328,11 @@ static void hns_gmac_init(void *mac_drv)
if (drv->mac_cb->mac_type == HNAE_PORT_DEBUG)
hns_gmac_set_uc_match(mac_drv, 0);
+ hns_gmac_config_pad_and_crc(mac_drv, 1);
+
+ dsaf_set_dev_bit(drv, GMAC_MODE_CHANGE_EN_REG,
+ GMAC_MODE_CHANGE_EB_B, 1);
+
/* reduce gmac tx water line to avoid gmac hang-up
* in speed 100M and duplex half.
*/
@@ -459,17 +466,6 @@ static int hns_gmac_config_loopback(void *mac_drv, enum hnae_loop loop_mode,
return 0;
}
-static void hns_gmac_config_pad_and_crc(void *mac_drv, u8 newval)
-{
- u32 tx_ctrl;
- struct mac_driver *drv = (struct mac_driver *)mac_drv;
-
- tx_ctrl = dsaf_read_dev(drv, GMAC_TRANSMIT_CONTROL_REG);
- dsaf_set_bit(tx_ctrl, GMAC_TX_PAD_EN_B, !!newval);
- dsaf_set_bit(tx_ctrl, GMAC_TX_CRC_ADD_B, !!newval);
- dsaf_write_dev(drv, GMAC_TRANSMIT_CONTROL_REG, tx_ctrl);
-}
-
static void hns_gmac_get_id(void *mac_drv, u8 *mac_id)
{
struct mac_driver *drv = (struct mac_driver *)mac_drv;
--
2.7.4
Powered by blists - more mailing lists