linux-kernel - Re: [PATCH] ARM: orion5x: only call into phylib when available

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <8760iqaihc.fsf@free-electrons.com>
Date:   Thu, 30 Mar 2017 17:31:59 +0200
From:   Gregory CLEMENT <gregory.clement@...e-electrons.com>
To:     Arnd Bergmann <arnd@...db.de>
Cc:     Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: orion5x: only call into phylib when available

Hi Arnd,
 
 On mar., mars 28 2017, Arnd Bergmann <arnd@...db.de> wrote:

> Board code cannot call mdiobus_register_board_info() when phylib
> or mdio_device is a loadable module:
>
> arch/arm/plat-orion/common.o: In function `orion_ge00_switch_init':
> :(.init.text+0x474): undefined reference to `mdiobus_register_board_info'
>
> I had a number of ideas for how this could be solved, but after the MDIO
> code got split out from PHYLIB it has gotten too hard, so I'm basically
> giving up, and only call the mdiobus_register_board_info() function
> if the MDIO layer is built-in to avoid the link error. This is similar
> to how we handle PHY registration on other ARM platforms.
>
> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
> Fixes: 648ea0134069 ("net: phy: Allow pre-declaration of MDIO devices")
> Signed-off-by: Arnd Bergmann <arnd@...db.de>

Applied on mvebu/fixes

Thanks,

Gregory

> ---
>  arch/arm/mach-orion5x/Kconfig | 1 +
>  arch/arm/plat-orion/common.c  | 5 +++++
>  2 files changed, 6 insertions(+)
>
> diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
> index 468b8cb7fd5f..e3429c8c2e38 100644
> --- a/arch/arm/mach-orion5x/Kconfig
> +++ b/arch/arm/mach-orion5x/Kconfig
> @@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
>  	select GPIOLIB
>  	select MVEBU_MBUS
>  	select PCI
> +	select PHYLIB if NETDEVICES
>  	select PLAT_ORION_LEGACY
>  	help
>  	  Support for the following Marvell Orion 5x series SoCs:
> diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
> index 9255b6d67ba5..aff6994950ba 100644
> --- a/arch/arm/plat-orion/common.c
> +++ b/arch/arm/plat-orion/common.c
> @@ -468,6 +468,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
>  		    eth_data, &orion_ge11);
>  }
>  
> +#ifdef CONFIG_ARCH_ORION5X
>  /*****************************************************************************
>   * Ethernet switch
>   ****************************************************************************/
> @@ -480,6 +481,9 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
>  	struct mdio_board_info *bd;
>  	unsigned int i;
>  
> +	if (!IS_BUILTIN(CONFIG_PHYLIB))
> +		return;
> +
>  	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
>  		if (!strcmp(d->port_names[i], "cpu"))
>  			break;
> @@ -493,6 +497,7 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
>  
>  	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
>  }
> +#endif
>  
>  /*****************************************************************************
>   * I2C
> -- 
> 2.9.0
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com