[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <379cb3b6-4b4f-b4f0-d5e2-1896c7b677b1@axis.com>
Date: Mon, 10 Apr 2017 09:43:08 +0200
From: Niklas Cassel <niklas.cassel@...s.com>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"David S. Miller" <davem@...emloft.net>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
Giuseppe CAVALLARO <peppe.cavallaro@...com>,
Thierry Reding <treding@...dia.com>,
Eric Engestrom <eric@...estrom.ch>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next] bindings: net: stmmac: add missing note about
LPI interrupt
On 04/07/2017 06:48 PM, Sergei Shtylyov wrote:
> Hello!
>
> On 04/07/2017 05:30 PM, Niklas Cassel wrote:
>
>> From: Niklas Cassel <niklas.cassel@...s.com>
>>
>> The hardware has a LPI interrupt.
>> There is already code in the stmmac driver to parse and handle the
>> interrupt. However, this information was missing from the DT binding.
>>
>> Signed-off-by: Niklas Cassel <niklas.cassel@...s.com>
>> ---
>> Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
>> index f652b0c384ce..8977abc266ac 100644
>> --- a/Documentation/devicetree/bindings/net/stmmac.txt
>> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
>> @@ -8,8 +8,8 @@ Required properties:
>> that services interrupts for this device
>> - interrupts: Should contain the STMMAC interrupts
>> - interrupt-names: Should contain the interrupt names "macirq"
>> - "eth_wake_irq" if this interrupt is supported in the "interrupts"
>> - property
>> + "eth_wake_irq" if this interrupt is supported in the "interrupts property
>
> Missed closing quote?
Thanks for pointing it out.
Will send a v2.
>
>> + "eth_lpi" if this interrupt is supported in the "interrupts" property
>> - phy-mode: See ethernet.txt file in the same directory.
>> - snps,reset-gpio gpio number for phy reset.
>> - snps,reset-active-low boolean flag to indicate if phy reset is active low.
> [...]
>
> MBR, Sergei
>
Powered by blists - more mailing lists