[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170418070831.pt6fj6hufaoboiqv@lukather>
Date: Tue, 18 Apr 2017 09:08:31 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Icenowy Zheng <icenowy@...c.io>
Cc: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...glegroups.com
Subject: Re: [PATCH v3 10/12] arm64: allwinner: a64: add DTSI file for AXP803
PMIC
On Mon, Apr 17, 2017 at 07:57:45PM +0800, Icenowy Zheng wrote:
> As nearly all A64 boards are using AXP803 PMIC, add a DTSI file for it,
> like the old DTSI files for AXP20x/22x, for the common parts of the
> PMIC.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 150 ++++++++++++++++++++++++++++++
> 1 file changed, 150 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/axp803.dtsi
>
> diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> new file mode 100644
> index 000000000000..f0e53a7fffbd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
> @@ -0,0 +1,150 @@
> +/*
> + * Copyright 2017 Icenowy Zheng <icenowy@...c.xyz>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/*
> + * AXP803 Integrated Power Management Chip
> + * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
> + */
> +
> +&axp803 {
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + regulators {
> + /* Default work frequency for buck regulators */
> + x-powers,dcdc-freq = <3000>;
> +
> + reg_dcdc1: dcdc1 {
> + regulator-name = "dcdc1";
> + };
> +
> + reg_dcdc2: dcdc2 {
> + regulator-name = "dcdc2";
> + };
> +
> + reg_dcdc3: dcdc3 {
> + regulator-name = "dcdc3";
> + };
> +
> + reg_dcdc4: dcdc4 {
> + regulator-name = "dcdc4";
> + };
> +
> + reg_dcdc5: dcdc5 {
> + regulator-name = "dcdc5";
> + };
> +
> + reg_dcdc6: dcdc6 {
> + regulator-name = "dcdc6";
> + };
> +
> + reg_dc1sw: dc1sw {
> + regulator-name = "dc1sw";
> + };
> +
> + reg_aldo1: aldo1 {
> + regulator-name = "aldo1";
> + };
> +
> + reg_aldo2: aldo2 {
> + regulator-name = "aldo2";
> + };
> +
> + reg_aldo3: aldo3 {
> + regulator-name = "aldo3";
> + };
Please sort them by alphabetical order.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists