[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170424114043.t3fkgvi4tyynllnb@dell>
Date: Mon, 24 Apr 2017 12:40:43 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Tony Lindgren <tony@...mide.com>
Cc: Samuel Ortiz <sameo@...ux.intel.com>, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Keshava Munegowda <keshava_mgowda@...com>,
Marcel Partap <mpartap@....net>,
Michael Scott <michael.scott@...aro.org>,
Roger Quadros <rogerq@...com>,
Sebastian Reichel <sre@...nel.org>
Subject: Re: [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL
mode
On Sat, 15 Apr 2017, Tony Lindgren wrote:
> Commit 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
> added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
> bit the wrong way. The comments in the code are correct, but the inverted
> use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be
> enabled instead of disabled unlike what the comments say.
>
> Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can
> be only pinged few times before it stops responding.
>
> Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
> Cc: Felipe Balbi <felipe.balbi@...ux.intel.com>
> Cc: Keshava Munegowda <keshava_mgowda@...com>
> Cc: Marcel Partap <mpartap@....net>
> Cc: Michael Scott <michael.scott@...aro.org>
> Cc: Roger Quadros <rogerq@...com>
> Cc: Sebastian Reichel <sre@...nel.org>
> Signed-off-by: Tony Lindgren <tony@...mide.com>
> ---
> drivers/mfd/omap-usb-tll.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
> diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
> --- a/drivers/mfd/omap-usb-tll.c
> +++ b/drivers/mfd/omap-usb-tll.c
> @@ -377,8 +377,8 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata)
> * and use SDR Mode
> */
> reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
> - | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
> | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
> + reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
> } else if (pdata->port_mode[i] ==
> OMAP_EHCI_PORT_MODE_HSIC) {
> /*
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists