[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <58FEF6D7.7090205@samsung.com>
Date: Tue, 25 Apr 2017 16:12:23 +0900
From: Inki Dae <inki.dae@...sung.com>
To: Hoegeun Kwon <hoegeun.kwon@...sung.com>, robh+dt@...nel.org,
mark.rutland@....com, catalin.marinas@....com, will.deacon@....com,
kgene@...nel.org, krzk@...nel.org
Cc: javier@....samsung.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
a.hajda@...sung.com
Subject: Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the
TM2 boards
2017년 04월 25일 10:54에 Hoegeun Kwon 이(가) 쓴 글:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 3ff9527..23191eb 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -60,7 +60,6 @@
> vci-supply = <&ldo28_reg>;
> reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
Reviewed-by: Inki Dae <inki.dae@...sung.com>
Thanks,
Inki Dae
> };
> };
>
>
Powered by blists - more mailing lists