[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1493085261-3488-1-git-send-email-hoegeun.kwon@samsung.com>
Date: Tue, 25 Apr 2017 10:54:21 +0900
From: Hoegeun Kwon <hoegeun.kwon@...sung.com>
To: robh+dt@...nel.org, mark.rutland@....com, catalin.marinas@....com,
will.deacon@....com, kgene@...nel.org, krzk@...nel.org
Cc: javier@....samsung.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
a.hajda@...sung.com, Hoegeun Kwon <hoegeun.kwon@...sung.com>
Subject: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2
boards
The decon uses HW-TRIGGER, so TE interrupt is not necessary.
Therefore, remove the te-gpios property in the TM2 dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 3ff9527..23191eb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -60,7 +60,6 @@
vci-supply = <&ldo28_reg>;
reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
- te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
};
};
--
1.9.1
Powered by blists - more mailing lists