| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 26 Apr 2017 17:25:47 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <matthias.bgg@...il.com>, <john@...ozen.org>,
<mark.rutland@....com>, <linux@...linux.org.uk>,
<linus.walleij@...aro.org>, <devicetree@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v2 03/30] arm: dts: mt7623: add clock controller device nodes
From: John Crispin <john@...ozen.org>
Add clock controller nodes for MT7623, including topckgen, infracfg,
pericfg and apmixedsys. This patch also cleans up two oscillators that
provide clocks for MT7623. Switch the uart clocks to the real ones while
at it.
Signed-off-by: John Crispin <john@...ozen.org>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 64 +++++++++++++++++++++++++++++++++++++------
1 file changed, 55 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 402579a..b97b2ba 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -14,6 +14,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/reset/mt2701-resets.h>
#include "skeleton64.dtsi"
/ {
@@ -53,16 +55,18 @@
#clock-cells = <0>;
};
- rtc_clk: dummy32k {
+ rtc32k: oscillator@1 {
compatible = "fixed-clock";
- clock-frequency = <32000>;
#clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "rtc32k";
};
- uart_clk: dummy26m {
+ clk26m: oscillator@0 {
compatible = "fixed-clock";
- clock-frequency = <26000000>;
#clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
};
timer {
@@ -74,6 +78,32 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ topckgen: syscon@...00000 {
+ compatible = "mediatek,mt7623-topckgen",
+ "mediatek,mt2701-topckgen",
+ "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@...01000 {
+ compatible = "mediatek,mt7623-infracfg",
+ "mediatek,mt2701-infracfg",
+ "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: syscon@...03000 {
+ compatible = "mediatek,mt7623-pericfg",
+ "mediatek,mt2701-pericfg",
+ "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
watchdog: watchdog@...07000 {
compatible = "mediatek,mt7623-wdt",
"mediatek,mt6589-wdt";
@@ -85,7 +115,7 @@
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&system_clk>, <&rtc_clk>;
+ clocks = <&system_clk>, <&rtc32k>;
clock-names = "system-clk", "rtc-clk";
};
@@ -98,6 +128,14 @@
reg = <0 0x10200100 0 0x1c>;
};
+ apmixedsys: syscon@...09000 {
+ compatible = "mediatek,mt7623-apmixedsys",
+ "mediatek,mt2701-apmixedsys",
+ "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@...11000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
@@ -114,7 +152,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>,
+ <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -123,7 +163,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>,
+ <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -132,7 +174,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>,
+ <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -141,7 +185,9 @@
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>,
+ <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
};
--
1.9.1
Powered by blists - more mailing lists