[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9d391e15-7912-426a-eb4e-343d9a65f54f@synopsys.com>
Date: Mon, 22 May 2017 10:41:53 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: <linux-media@...r.kernel.org>,
Hans Verkuil <hans.verkuil@...co.com>
CC: Carlos Palminha <CARLOS.PALMINHA@...opsys.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [RFC 0/2] Synopsys Designware HDMI Video Capture Controller + PHY
Hi Hans,
On 21-04-2017 10:53, Jose Abreu wrote:
> Hi All,
>
> This is a RFC series that is intended to collect comments regarding the
> Synopsys Designware HDMI RX controller and Synopsys Designware HDMI RX e405 PHY
> drivers.
>
> The Synopsys Designware HDMI RX controller is an HDMI receiver controller that
> is responsible to process digital data that comes from a phy. The final result
> is a stream of raw video data that can then be connected to a video DMA, for
> example, and transfered into RAM so that it can be displayed.
>
> The controller + phy available in this series natively support all HDMI 1.4 and
> HDMI 2.0 modes, including deep color. Although, the driver is quite in its
> initial stage and unfortunatelly only non deep color modes are supported. Also,
> audio is not yet supported in the driver (the controller has several audio
> output interfaces).
>
> Feel free to take a look at this series and please leave a comment! I can
> expand a little bit more about design decisions and would like to know wether
> these were the best choices.
>
> With best regards,
> Jose Miguel Abreu
>
> Jose Abreu (2):
> [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver
> [media] platform: Add Synopsys Designware HDMI RX Controller Driver
>
> Cc: Carlos Palminha <palminha@...opsys.com>
> Cc: Mauro Carvalho Chehab <mchehab@...nel.org>
> Cc: Hans Verkuil <hans.verkuil@...co.com>
> Cc: linux-kernel@...r.kernel.org
> Cc: linux-media@...r.kernel.org
>
> drivers/media/platform/Kconfig | 2 +
> drivers/media/platform/Makefile | 2 +
> drivers/media/platform/dwc/Kconfig | 17 +
> drivers/media/platform/dwc/Makefile | 2 +
> drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 879 ++++++++++++++++
> drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 ++
> drivers/media/platform/dwc/dw-hdmi-rx.c | 1396 +++++++++++++++++++++++++
> drivers/media/platform/dwc/dw-hdmi-rx.h | 313 ++++++
> include/media/dwc/dw-hdmi-phy-pdata.h | 64 ++
> include/media/dwc/dw-hdmi-rx-pdata.h | 50 +
> 10 files changed, 2788 insertions(+)
> create mode 100644 drivers/media/platform/dwc/Kconfig
> create mode 100644 drivers/media/platform/dwc/Makefile
> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c
> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h
> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c
> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h
> create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h
> create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h
>
Sorry for pinging but could you review this rfc series? This is
not for the controller I mentioned a while ago, its for a
different one which I had a few free time to make a driver.
Though, the behavior and phy interface is similar, and the phy
driver used is the same also.
Best regards,
Jose Miguel Abreu
Powered by blists - more mailing lists