[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1496385275-6899-9-git-send-email-anup.patel@broadcom.com>
Date: Fri, 2 Jun 2017 12:04:32 +0530
From: Anup Patel <anup.patel@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Oza Pawandeep <oza.oza@...adcom.com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
Pramod Kumar <pramod.kumar@...adcom.com>,
Sandeep Tripathy <sandeep.tripathy@...adcom.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
Pramod Kumar <pramodku@...adcom.com>
Subject: [PATCH v6 08/11] arm64: dts: Add GPIO DT nodes for Stingray SOC
From: Pramod Kumar <pramod.kumar@...adcom.com>
The GPIOs on Stingray SOC are based on iProc GPIOs hence
using this we add GPIO DT nodes for Stingray SOC.
Signed-off-by: Pramod Kumar <pramodku@...adcom.com>
Reviewed-by: Ray Jui <rjui@...adcom.com>
Reviewed-by: Scott Branden <sbranden@...adcom.com>
---
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 639c25d..e91debe 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -251,6 +251,14 @@
ranges = <0x0 0x0 0x66400000 0x100000>;
#include "stingray-clock.dtsi"
+
+ gpio_crmu: gpio@...24800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x00024800 0x4c>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
};
hsls {
@@ -261,6 +269,32 @@
#include "stingray-pinctrl.dtsi"
+ gpio_hsls: gpio@...d0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x000d0000 0x864>;
+ ngpios = <151>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinmux 0 0 16>,
+ <&pinmux 16 71 2>,
+ <&pinmux 18 131 8>,
+ <&pinmux 26 83 6>,
+ <&pinmux 32 123 4>,
+ <&pinmux 36 43 24>,
+ <&pinmux 60 89 2>,
+ <&pinmux 62 73 4>,
+ <&pinmux 66 95 28>,
+ <&pinmux 94 127 4>,
+ <&pinmux 98 139 10>,
+ <&pinmux 108 16 27>,
+ <&pinmux 135 77 6>,
+ <&pinmux 141 67 4>,
+ <&pinmux 145 149 6>,
+ <&pinmux 151 91 4>;
+ };
+
uart0: uart@...00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
--
2.7.4
Powered by blists - more mailing lists